Find or Sell any Parts for Your Vehicle in USA

*full Gasket Set* Chevrolet Silverado Suburban 454 7.4l V8 "j" 1996-2000 on 2040-parts.com

US $137.00
Location:

Portland, Oregon, United States

Portland, Oregon, United States
Condition:New Warranty:Yes Manufacturer Part Number:C7.4L-A Interchange Number:XXX Brand:Enginetech Part Interchange:XXX

 

ALL Components Specs are O.E.M or BETTER
 
SAME DAY Shipping!!
 
 
APPLICATION:
1996-2000 Chevrolet GMC 454 7.4L OHV V8 VORTEC
VIN "J"
 
 
THIS LISTING WILL INCLUDE:
  • FULL GASKET SET

1 - EGR VALVE GSKT
2 - EXHAUST MANIFOLD GSKT
2 - CYLINDER HEAD GSKT
2 - INTAKE END SEAL
2 - INTAKE MANIFOLD GSKT
2 - OIL DRAIN PLUG GSKT
1 - OIL PAN GSKT
1 - OIL PUMP COVER GSKT
1 - OIL PUMP SHAFT RETAINER
6 - OIL PUMP BODY "O" RING
2 - PLENUM GSKT
1 - REAR MAIN SEAL
1 - THERMOSTAT SEAL
1 - TIMING COVER GSKT
2 - TIMING COVER GSKT
2 - VALVE COVER GSKT
16 - VALVE STEM SEAL
3 - WATER PUMP GSKT

 

WHY THE ENGINETECH GASKET IS -BEST- FOR YOU:

Rather than duplicating OE designs, Enginetech Gaskets are designed specifically for the rebuilder. They accommodate the kinds of surfaces you have to work with, and they really do the job, without leaks or comebacks.

Rebuilder consolidation - fewer part numbers accurately cover more engines - means less inventory cost. Convenient packaging and clear instructions help your installers do the job right, faster and easier. All of this, and more, makes Enginetech Gaskets truly the best value going for you!

SUPERIOR DESIGN AND MATERIALS
Enginetech engineers analyzed the special sealing problems of each engine covered, and designed the gaskets and seals that would work best in each part of the engine. Thermal shock dyno testing verified the design excellence. Unlike OE designs, The Rebuilder's Gasket is designed for and works better on rebuilt engines.

Individual gaskets are die cut from the right material in the right thickness for each application, and have elastomeric sealing beads in critical areas.

SUPERIOR PACKAGING
The easy-to-learn part number is highly visible regardless of which way the gaskets are stocked. A complete, easy to read bill of materials is on the label. The head gaskets can be easily removed without opening the complete package, therefore the rebuilder can use the head gaskets and send the balance of the set to the installer...still sealed. The gaskets are divided into subsets, thus the smaller, more fragile components are protected from damage or folding.

Simplified installation instructions are printed on a large poster card with large print and illustrations. The easy to read instructions promote a better quality of workmanship by the installer and prevents costly mistakes.

 
 
CUSTOMER SUPPORT:
If you have any concerns or questions about this part, please contact us via clicking the "Ask A Question" link under Seller Info at the top of the page to the right.
 
You may also call our office at: (503)719-7715
Monday-Friday: 9:00am-5:00pm PST
 

Our goal is to earn 5-STAR RATING and POSITIVE FEEDBACK with EVERY Purchase!
Here at REDLINE, we are committed to your satisfaction.  With every valued customer we will automatically leave you positive feedback within 48 hours after we have recieved cleared payment from you.  We want you to be 100% happy with your order. When you receive your order please take some time and leave us postive feedback with Ebay.  If you are not satisfied, or do not believe you can leave us positive feedback, PLEASE let us know before leaving feedback.  Send us a message on Ebay or give us a call at (503)719-7715 and we will do WHATEVER it takes to earn your satisfaction. 
Please know that a 5-Star Rating and Postive Feedback is very, very appreciated, and VITAL to us continuing to provide quality auto parts at a low cost to the customer.  Thanks!
 GUARANTEES
Any warranties on the products(s) sold hereby are those made by the manufacturer. The seller, REDLINE Engine Supply, hereby expressly disclaims all warranties, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose, and REDLINE Engine Supply neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of said products. Any limitation contained herein does not apply where prohibited by law. New items can be returned in unopened, unused condition for refund (subject to 20% restocking fee) or replacement within 7 days. We cannot refund S&H on standard returns.  If there was a mistake in the order made by REDLINE, we will happily replace or refund the products with NO restocking fee, no questions asked. Here at REDLINE, we STAND by our products and service. 

WE ACCEPT: 
  • PAYPAL
  • Visa
  • MasterCard
  • Discover Card
  • American Express
  • To pay with a CREDIT CARD call our office at (503)719-7715
  •  Payment must be received within 3 business days of the purchase. 
 Once payment for an order is received the product will generally be shipped the SAME DAY.  Except on weekends and federal holidays, then the items will be shipped the next available shipping day.  Actual shipping time usually takes between 2-7 shipping days, depending on location.  If you do not recieve your items in 7 shipping days please contact us and we will locate your order. We use UPS/FEDEX for all of our Continental USA shipments.  We will need your shipping address and billing address before any shipment is made. Shipments MUST be inspected at the time of the delivery for damage. If a freight claim is not filed then we can not do anything. Contact us to do a freight claim immediatePhotobucketly if damage is noticed. 
 
*Shipping Charge covers the 48 Continental United States ONLY.
 
*Shipping to Hawaii/Alaska is available, but an additional shipping surcharge will be applied.
 
*To ship to Canada you must use a valid credit card, and the buyer must agree to pay for 100% of the aquired shipping costs. 

 


Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.

Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.

MG Icon SUV Concept revealed ahead of Beijing debut

Wed, 18 Apr 2012

MG Icon SUV heading for Beijing The MG Icon – a compact SUV Crossover – has been revealed ahead of a debut at the Beijing Motor Show. Men with beards and pipes will be dismayed at the news that there is going to be an MG SUV, but there is and it’s the MG Icon – which might be setting the bar a but high. Looking like a cross between and MGB GT and a Juke, the MG Icon is expected to share a platform with the MG5 and MG6 and be powered by the 1.5 litre four-pot SAIC used in the Chinese versions of the MG and Roewe.

University of Huddersfield Degree Show 2004

Sat, 13 Nov 2004

Nov 13, 2004 - Final year undergraduate students from Britain's University of Huddersfield displayed their work at their annual degree show exhibition in Huddersfield, and also at the New Designers exhibition held in July at the Business Design Centre in London. With 19 graduating students from the BA(Hons) Transport Design course, the range of design projects reflects the broad nature of the discipline; with projects ranging from automotive exteriors and interiors, motorcycles, bridges and urban transportation interfaces. All final year projects have a strong design research element where a student's detailed knowledge and understanding of future market, social and environmental trends validates the project and the core design concept.

Mercedes SLC (a ‘Baby’ SLS) confirmed. Again

Thu, 26 Apr 2012

Mercedes SLC confirmed once more Mercedes big-wigs have been discussing future plans for AMG and have confirmed production of the Mercedes SLC – a baby SLS. It’s always nice to speculate on new cars to come from interesting car makers, and in the case of Mercedes we’ve been actively playing the baby SLS game – a Mercedes SLC – since 2009. What we need to remember is that the SLS – and any SLC to come – is not really a Mercedes, it’s an AMG.