12 Motul 300v Competition 15w50 Synthetic Motor Oil - 2 L Can Ea. - 103138 New on 2040-parts.com

Racing lubricant for Motorsports
100% Synthetic – ESTER Core®Technology 

TYPE  OF USE
All racing gasoline or diesel engines, naturally aspirated or turbocharged fitted with injection (direct /
indirect) or carburetted. 
For race prepared engines operating over a wide range of rpm and temperatures.

PERFORMANCES
STANDARDS Above existing Motorsport standards.
TYPE OF USE        Endurance – Rally – GT – Historic racing cars with rebuilt engines. 

SPECIFICATIONS  
The SAE 15W-50 viscosity allows fast oil pressure establishment while guaranteeing at hot temperature 
high oil pressure for outstanding reliability and faster engine revving. 

ESTER Core® TECHNOLOGY 
For decades MOTUL has developed high performance synthetic Ester based lubricants. 
By selecting esters over other high performance synthetic base stocks and combining them with an
innovative additive package, MOTUL has created a perfect synergy. 
This most advanced ESTER Core® Technology allows maximum power output of the engine without
compromising reliability and wear. 

ADVANTAGES  
The SAE 15W-50 viscosity enables to compensate high engine oil dilution by unburned fuel and
maintains a stable oil pressure. 
Maximum oil film resistance at very high temperature: Engine wear is reduced.
Friction Modifier: Maximum power output, decrease operating temperature.
Low volatility: Oil consumption is reduced. 
High shear stability: Stable oil pressure whatever using conditions. 

RECOMMENDATIONS   
300V Competition 15W-50 is particularly recommended for endurance racing engines or old racing
engines (rebuilt engines) which need enhanced protection against wear and oil pressure drops.  
For optimal engine performances avoid mixing with other synthetic or mineral lubricants.
Oil change: according to your own use. 

PROPERTIES
Viscosity grade SAE J 300  SAE 15W-50
Density at 20°C (59°F) ASTM D1298 0.868
Viscosity at 40°C (104°F) ASTM D445 122.9 mm²/s
Viscosity at 100°C (212°F) ASTM D445 18.1 mm²/s
HTHS viscosity at 150°C (302°F) ASTM D4741 5.3 mPa.s
Viscosity index ASTM D2270 164
Pour point ASTM D97 -39°C / -38.2°F
Flash point ASTM D92 238°C / 460.4°F
TBN ASTM D2896 8.25 mg KOH/g