Find 150pc Yamaha Bolt Kit YZF450 YZF250 YZ250F YF400F YZ426F YZ450F Maintain Restore in Lakeside, California, US, for US $37.99

Returns Accepted:Returns Accepted Refund will be given as:Money back or exchange (buyer's choice) Item must be returned within:30 Days Return shipping will be paid by:Buyer Restocking Fee:No Part Brand:specbolt YZF Yamaha 150pc bolt kit Manufacturer Part Number:YZF150 Placement on Vehicle:Array Surface Finish:silver zinc plated Warranty:Yes

THIS IS IT!!!

-THE NEW-

"YZF 150pc BOLT KIT"

This 150 piece HIGH QUALITY OEM style bolt kit is recommended for all...

YAMAHA YZ250F YZ400F YZ426F AND YZ450F INCLUDING WR MODELS

Designed to help you maintain and restore your YZ-F using only the original type fasteners.

This Specbolt 150pc kit was designed to work for all 1998 to current model Yamaha YZF & WR models.

Designed to help you maintain and restore your YAMAHA YZF using correct original type fasteners.

This all new Specbolt 150pc kit is based off our 120pc YZF kit, but with some very worthwhile upgrades.

Check it out!!!

Upgrades from our 120pc kits include:

Full 12pc Sprocket bolt kit with locking flange nuts ($10.00 value and not included with 120pc kits)

Full set of 6 OEM matching Fork Guard bolts (120pc kits come with 3/half)

4-M6x12 & 4-M6x16 special wide head flange bolts used for Yamaha plastics (120pc kits come with half)

2 different style seat bolts sets to be sure we have all the YZFs covered.(120pc kits come with 1 of each size)

2 chain adjusters (120pc kits have 1)

...PLUS all the other essential stuff like bolts for plastics, fender, body bolts and fender washers, engine side cover bolts, radiator bolts, shifter bolt, cylinder and head nuts (most), exhaust bolts, various triple clamp and handlebar clamp bolts, carb bowl screws, bolts for controls, fuel tank bolts, selection of washers, and number plate and side panel bolts.

CLICK THIS LINK TO VISIT SPECBOLT'S STORE AND VIEW ALL THE "BUY IT NOW" KITS!!!

Will include the following NEW correct hard to find items:

6 OEM matching Fork Guard bolts, 8 OEM spec wide head body bolts (4 M6x12 & 4 M6x16), 2 matching seat bolts, 2 correct square nuts for rear fender, and 2 chain adjuster bolts with flange nuts, along with all the other normal stuff like assorted plastics fender body bolts and fender washers, seat bolts, engine side cover bolts, radiator bolts, shifter bolt, cylinder and head nuts, exhaust bolts, various triple clamp and handlebar clamp bolts, carb bowl screws, bolts for controls, fuel tank bolts, shroud bolts, and number plate and side panel bolts

FREQUENTLY ASKED QUESTIONS

-What was the 150pc kit designed for?-

To bridge the gap between our popular 120pc kit and our bigger 250pc kit.

The 150pc kits have the stuff you really want.

-What is an OEM matching bolt?-

OEM matching bolts have the same design and look of your original bolts. Our OEM style bolts are designed to match exact factory sizes with the same head style and strength ratings (8.8 or 10.9 grade) that originally came on your motorcycle. They all meet or exceed the factory specs.

These are all heat treated and zinc plated to look great, resist corrosion, and last the life of your motorcycle or ATV.

-Can I find these at a local hardware store?-

As most of us know from experience, OEM style fasteners are not available at our local hardware stores. The metric fasteners found at Ace or Home Depot are not going to match.

These fasteners are usually only found at the cycle dealerships and expensive to purchase on an individual basis.

It's great to have the right fasteners on hand when you need them.

-What about OEM style nuts?-

Specbolt uses OEM matching nuts. You get a generous assortment of both locking and non locking nuts in M5, M6, M8, and M10 sizes.

-What about metric washers?-

Washers are important for many things including plastics and bodywork, engine, and exhaust mounts. We include a nice varity of the most commonly found washers used on your bike.

-Will I get any sealing washers?-

Specbolt 150pc kits contain copper and aluminum soft tempered compression washers. 2 each of 3 different, most needed sizes. The size are M6x11 copper typically used for your coolant drain bolts or oil height check bolt, M8x15 aluminum used for oil drain plugs, and M10x14.5 aluminum for hydraulic brake lines, etc...

-What if I have aftermarket parts on my bike?-

Specbolt kits include some additional sizes to fit some of the aftermarket items on your bike as well...such as triple clamps, exhaust, etc ... If you want to be sure to get the right size fasteners for your specific aftermarket part...just ask. We strive to get you everything you need.

-Will I get every nut and bolt found on my bike? What isn't included?-

This kit is designed as a maintenance kit and is a great assortment most of the commonly used fasteners found on your bike. It is not a full on restoration kit. It doesn't include shock or suspension/linkage bolts, axles/axle nuts, swingarm bolt, or any long case bolts over 40mm.

-What if I want to customize my kit or request more of a certain type of fastener?-

Not a problem...If you have any special needs or want to request certain sizes just send me an email or call me. I will do my best to create a custom kit with your specific needs in mind.

-What if I run low on a certain fastener. Can I get refill packs?-
Yes... I offer every one of our fastener sizes in convienient and economical refill packs. Just send me an email, check the website, or call me.

-FREE PRIORITY SHIPPING TO ANYWHERE IN THE USA-

GET IT EVEN FASTER (1 or 2 days)WITH ECONOMICAL USPS EXPRESS MAIL.

-FAST International Priority and Express shipping options-

We will absolutely mail your kit the same or next business day so you will get it fast!

We gladly accept Pay Pal or

Call us with your Credit Card

770-363-6580

Mon - Sat 8AM to 6PM Pacific time

CLICK THIS LINK TO SEE ALL OF OUR "BUY IT NOW" KITS!!!

Don't get caught working on your bike and not having the right fasteners again!!!

Notes on International Shipping:

Import duties, taxes and charges are not included in the item price or shipping charges.

These charges are the buyer’s responsibility. Please check with your Countries customs office to determine what these additional costs will be prior to purchasing item.

These charges are normally collected by the delivery company or when you pick the item up. Do not confuse these charges with additional shipping charges.

Refunds will not be given on refused/undeliverable International Shipments for any reason..

Politecnico di Milano collaborates with Volkswagen for 2011 Masters course

Fri, 25 Mar 2011

Politecnico di Milano in Milan, Italy, is collaborating with the Volkswagen Group to create the third installment of its Masters Degree in Transportation & Automobile Design. The course, which will run for 15 months, will be open to 25 graduates. The deadline for applications is 23 May 2011.

Pierre Authier: I'm not moving to Opel/Vauxhall

Fri, 31 Aug 2012

As the ongoing General Motors designer saga continues, the latest Opel/Vauxhall Vice President of Design elect, Pierre Authier has taken his name off the shortlist for the Rüsselsheim. Car Design News had received information from a reliable source within PSA about Authier's supposed move, however we have since spoken to Pierre, who was keen to put the record straight: “I read the flattering article on my recruitment as VP of Design for Opel/Vuaxhall, but this information is false,” he told CDN. “I am really enjoying my position at Peugeot and with the 208 family team that has made such incredible work.” The search for the missing piece in the GM puzzle continues.

When Toly takes a trip, it's a trip

Thu, 10 Feb 2011

Editor's note: This story was published in the March 27, 2000, issue of AutoWeek. Anyone looking to spend a car sort of summer in Europe should let Toly Arutunoff plan it for them. Though you'd need to spend more time than the typical vacation allows and a few more euros than the youth hostel requires, it would be one unforgettable time.

150pc Yamaha Bolt Kit Yzf450 Yzf250 Yz250f Yf400f Yz426f Yz450f Maintain Restore on 2040-parts.com

Fairings & Body Work for Sale

Politecnico di Milano collaborates with Volkswagen for 2011 Masters course

Pierre Authier: I'm not moving to Opel/Vauxhall

When Toly takes a trip, it's a trip