Find or Sell any Parts for Your Vehicle in USA

1998 Polaris Xlt Sp 600 Aggressive Chassis Main & Headlight Wiring Harness on 2040-parts.com

US $24.99
Location:

Lake Crystal, Minnesota, United States

Lake Crystal, Minnesota, United States
Used Item - May show some wear from normal use - Please look at all pictures carefully
Brand:Polaris UPC:Does Not Apply

   Benny's Powersports  

WE ARE HERE TO HELP - PLEASE CALL US IF YOU HAVE ANY QUESTIONS - (507) 726-2808. 

*Follow us on Facebook at https://www.facebook.com/bennyspowersports.

You may be interested in our other eBay listings.

Part Description

1998 Polaris XLT SP 600 Aggressive Chassis Main & Headlight Wiring Harness

This part is off of a 1998 Polaris XLT SP 600 Aggressive Chassis.  It may fit many other Years and Models of Polaris Snowmobiles.

Please Check fitment BEFORE you purchase.

*All parts are shipped exactly as they are pictured unless otherwise noted in description.

*All parts are inspected and deemed usable unless otherwise noted in description.

*Parts may require some cleaning and adjustments for proper installation.

*Engine parts should be properly cleaned and lubricated prior to assembly. 

*Used Carburetors should be cleaned and tuned before installation. 

*ALL PARTS SHOULD BE INSTALLED BY AN EXPERIENCED MECHANIC - (I will not be held responsible for part failure due to poor installation)

Part Fitment

You, "the buyer", are responsible for doing all the research prior to buying this part. If you are not sure that it will fit your vehicle, please take the time to do the research prior to buying the item. I will try to answer fitment questions to the best of my knowledge and resources.

Used Parts

The dictionary defines the word "used" as follows: "Not New, Previously Owned". With that being said, this is a "used" part. I will always do my best to make sure the parts that I sell are in good usable condition. I test vehicles before I tear them down. I also inspect each part before taking pictures. I have no interest in selling you a part that you can't use, but you have to keep in mind this is a used part and may need to be cleaned or serviced in some way prior to re-installation. I also sell new parts but they are much more expensive.  

Bearings, Bushings, Gaskets, Seals, Clutch Plates, Sprockets, Pistons, Rings, and Brake Pads are all considered "wear parts" and cannot be guaranteed unless specifically stated in the description that they are good.

PLEASE LOOK AT EVERY PICTURE CLOSELY!

Engine/Motor & Carburetor Parts

** All engine parts have been drained of oil and fluids. However, there may be residual fluid in, on, or around the part(s). YOU or YOUR MECHANIC are solely responsible for making sure the part(s) are properly  cleaned, lubricated, and installed by a professional mechanic. We highly suggest using new gaskets and seals for engine reassembly as well as following the “Factory/OEM Service Manual” guidelines for proper assembly procedures and torque values for all fasteners. This and all engine parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).

** All Carburetor/Intake parts have been drained of fuel. Sometimes these parts sit on a shelf for several weeks/months prior to selling them. YOU or YOUR MECHANIC are solely responsible for making sure the part(s) are properly cleaned, lubricated, and installed by a professional mechanic. We highly suggest servicing carburetors and throttle bodies following the “Factory/OEM Service Manual” guidelines for proper assembly procedures and torque values for all fasteners. This and all carburetor/intake parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).

ATTENTION: FAILURE TO FOLLOW THE ABOVE PROCEDURES AND GUIDELINES MAY RESULT IN CATOSTROPHIC ENGINE FAILURE – AND/OR PREMATURE ENGINE WEAR. Therefore, Benny’s Powerports LLC and its employees will not be held responsible for any and all failures associated with the use of these engine parts.
 

Shipping

I ship Monday through Friday DAILY unless noted on my home page. I ship most of my items USPS Priority or First Class Mail 1-5 days delivery in the US. Larger items will go FedEx ground 1-5 days delivery in the US. Very Large/Oversized items such as Fenders, Hoods, Etc. will be freighted via Greyhound Express to your closest terminal or can be picked up locally. Please be advised that over-sized items are subject to space availability on the Greyhound Buses so delivery is usually 7-10 days, but can sometimes take closer to 15 business days (3 weeks). Some over-sized items are able to fit under the USPS requirements and can be shipped directly for an additional charge. Please contact us if you would like to know if your item can be shipped directly to you and get a price quote. 

Shipping price stated is for the lower 48 states only. If you are in Alaska, Hawaii, Puerto Rico, Virgin Islands, or any other U.S. Territory, please contact me for shipping quote. Many small items will not need additional postage, but please ask for a quote first. If you purchase an item before receiving a shipping quote, please remember that any additional shipping charges need to be paid before your item will be shipped. Canada and International buyers are welcome but please contact me prior to bidding or buying so you understand the shipping costs. I will combine international shipping costs on multiple items.

Returns

We gladly accept returns. Please contact us before returning any item or there may be a delay in the refund of your payment.  You may contact us through eBay messaging or by phone (507) 726-2808. Items must be returned within 14 days of receiving the item. All sales after 14 days are considered final. Return shipping is paid by the buyer. The buyer accepts a 20% restocking fee or the equivalent of our original shipping costs plus fees if that amount exceeds the 20%.  (Please understand that even though a listing may have offered Free Shipping, we are still charged by the courier. As such our shipping cost will be deducted from the refund if they exceed the 20%)


Electrical items are NON-RETURNABLE for 3 reasons.
#1 - People using the part for testing.
#2 - People installing them on an incorrect machine.
#3 - Our inability to re-test most electrical parts after they have been returned and the machine has already been torn down.
We will not re-sell anything that we can't assure our customers was in working order when they bought it.
  

International Buyers

All international bidders are welcome.  We ship most items via USPS Priority Mail to most countries and do not insure their ground service.  With higher priced or large oversized items we may have to use UPS or FedEx due to USPS limitations. This may cause higher shipping costs.  Please understand these extra costs on such items.  If an item does not have a shipping price for your country, please contact us and we can get you a quote.

Import Duties, Taxes, and Charges are not included in item prices or shipping costs.  These charges are the buyers responsibility.  Please check with you country's customs office to determine any additional cost before bidding or buying.  These charges are usually collected by the delivery shipping company or when you pick up your item.  These are not additional shipping charges.

We will NOT mark values lower or mark as gifts - US and International Government policies prohibit such actions!

Feedback and 5 Star Ratings

Benny's Powersports is a small family owned and operated business.  We work very hard to establish and keep a good reputation, and customer service is our #1 priority. We have no interest in short changing anyone in any way at all. With that being said, we are human and do make mistakes. If you feel you cannot leave 5 stars and good feedback for ANY reason, please give us the opportunity to make it up to you. Call us at (507) 726-2808 or email us with your issue. You are our VALUED customer and we will not take you for granted.


 

Electrical Components for Sale

Porsche Cayman and Boxster GTS on the way

Wed, 29 Jan 2014

Porsche Cayman GTS and Boxster GTS variants are expected to be unveiled at the 2014 Beijing Motor Show this year, before the upgraded versions of the German firm’s two-seater coupe and convertible models go on sale in April. According to reports, development work on both cars is now almost complete, with both vehicles gaining a power increase and revised styling over existing Cayman and Boxster models (pictured). On Bing: see pictures of the Porsche Boxster GTSFind out how much a used Boxster costs on Auto Trader Porsche has used the ‘GTS’ tag before, for versions of its existing cars that provide a more focused driver experience and greater emphasis on involvement and handling, and which retain normally aspirated engines.

The 1980s classic cars that could become MOT-free

Tue, 26 Aug 2014

A change of law in 2012 meant that cars registered before 1960 no longer have to pass the yearly test for roadworthiness known as the MOT. However, a new EU directive means that, from 2018, this could be extended to all cars more than 30 years old, as long as they haven’t been substantially modified. Click on to read more about cars over 30-years-old becoming MOT exempt

BMW 750 Hybrid will show at Frankfurt 2009

Fri, 01 May 2009

BMW 750 Hybrid will launch at the Frankfurt Motor Show in September 2009 [ad#ad-1] Hybrid cars are starting to make their presence felt in the market place, and even at the top end of luxury saloons the market is moving in that direction. Whether you buy in to the planet-saving ethos or not, it’s hard to argue against something that costs less to run and helps you be perceived as a caring, sharing conscientious member of society – even if you drive a huge great Merchant-Banker-mobile! Lexus have made inroads with their LS 600, and recently we reported that Mercedes has not just given the Mercedes S Class a mid-cycle refresh, but has announced the imminent launch of the Mercedes S400 Hybrid.