Find or Sell any Parts for Your Vehicle in USA
Boat Parts > Outboard Engines & Components > Complete Outboard Powerheads

1999 / 2005 Yamaha / Mercury Outboard Four Stroke Rebuilding 80 / 90 /100 /115 on 2040-parts.com

US $2,450.00
Location:

West Sunbury, Pennsylvania, United States

West Sunbury, Pennsylvania, United States
1999 / 2005 YAMAHA / MERCURY OUTBOARD FOUR STROKE REBUILDING 80 / 90 /100 /115, US $2,450.00, image 1
“At Outboard Rebuild when we use the word ReMANUFACTURED you can be 100% sure that all cylinders have been machined by only the best machines that are available. Rotler F3 boring center that is designed to do blind hole engines, Diamond computer assisted hone, all critical surfaces machined back to uniform for proper gasket sealing. We install NEW parts, pistons, Piston rings, wrist pin's, bearings, crank seals, the list goes on and on.. We feel you should get what you pay for " A powerhead that last YEARS not months or even weeks”
Brand:Yamaha Core charge,block crankshaft:$550 Engine(HP):75,90,100,115 Core charge,block crankshaft:$550 Stroke:4-Stroke


"OUTBOARD REBUILDER " WE ARE THE WORLD LEADER SINCE 1972 

**REMANUFACTURED OUTBOARD POWERHEADS  




YOU ARE BIDDING ON ANY Yamaha or Mercury 1999 tru 2005 Four stroke 75 / 90 / 100/ 115 OUTBOARD SHORT BLOCK 4 cylinder. WE USE ONLY O.E.M. Mercury or Yamaha MARINE PARTS WITH FORGED PISTONS.


reusable core required at ebay price


HOW DOES IT WORK ?

After auction specify what year model and your address you would like short block shipped to. when you receive you short block put your old motor in our crate and we will have a toll free number to call for return. we will inspect core and return you deposit


1 YEAR WARRANTY ON ALL OUR POWERHEADS. UNHEARD OF 4 Yr Warranty AVAILABLE !


Bid with confidence, OVER 20,000 POWERHEADS IN THE PAST 40 YEARS



any question on application 724-290-0509

Message us through eBay for a copy of our written warranty 

-----------------------------------------------------------------------=======================================------------------------------------------------------------------

YOU GET WHAT YOU PAY FOR!!
THE HIGH DEMAND OF MARINE ENGINES HAVE TO BE REBUILT ONLY ONE WAY.



WITH OUR BUYING POWER AND STATE OF THE ART MACHINES WE CAN SAVE YOU MONEY $$$$ WITHOUT SACRIFICING QUALITY !!  OVER 20,000 powerhead done and 200 marine dealers to our credit we can offer you same as new powerhead for a fraction of the price.


“At Outboard Rebuild when we use the word ReMANUFACTURED you can be 100% sure that all cylinders have been machined by only the best machines that are available. Rotler F3 boring center that is designed to do blind hole engines,  Rottler HP7A Diamond computer assisted hone for unsurpassed cylinder wall finish, critical in 2 stroke motors that rely on oil/gas mix that is needed to lubricate, We machine all critical surfaces back to uniform for proper gasket sealing. We install NEW parts, Pistons, Piston rings,rod bearings, crank seals, the list goes on and on.. We feel you should get what you pay for " A powerhead that last YEARS as they should

  The Industry (outboard remanufacturing) standard for rebuilt motors is ONLY 100 hours per outboard repair, and a loss of up to 20% power loss . Here is the problem:  piston and ring seating is dependent directly on cylinder wall finish. To accomplish the proper finish, the method used is referred to as "plateau finish". This process is how today's automobile motors go well over 100,000 instead of maybe 50,000 miles like they used to. To obtain this finish in a blind hole motor (outboards) you can't use automotive machining methods. Special machines using diamond precision computer controlled hones are needed. These machines with their support equipment are a must on modern outboards, gone are the days that you can do this correctly at a dealer or in a garage. With this in mind we attempt to educate.

   For the uneducated customer who looks only for low price also gets a new friend.  Who? The dealer or person who is going to rebuild your engine again, to the industry standard, AGAIN...


DID YOU KNOW WE ARE THE ONLY REBUILDER THAT REBUILDS OUTBOARD CRANKSHAFTS IN HOUSE ?  All our Rebuilds have the crankshafts replaced or refinished. We don't put new bearings on a used crankshaft without at least checking integrity to .002 of an inch then polishing. We are the only rebuilder who can refinish crankshafts if needed with the proper equipment, "submerged arc welding" for hardened nitrated outboard crankshafts.  
 

 

                       We will arrange all shipping by FedEx freight. We ship daily and will pass our 85% discount on to you !! Residential service available with lift gate.

shipping questions 877 983-2537

UK’s first public hydrogen filling station opens

Tue, 20 Sep 2011

First UK public Hydrogen Filling Station Opens Every car maker – well, every car maker with an eye to the future – is developing hydrogen fuel cell cars. Really, short of portable cold fusion becoming a reality, hydrogen is the only viable future for cars. So the opening of the UK’s first public hydrogen filling station today at Honda’s South Marston plant is a big deal.

Mercedes SLC Gullwing caught testing

Thu, 05 Feb 2009

McLaren is well on the way with development of the P11 as we saw recently, and Mercedes is definitely getting close with its replacement, the Mercedes SLC AMG Gullwing. Mercedes SLC AMG Gullwing - Caught testing and due in showrooms in 2010 Our snappers caught the Gullwing out  testing, ready for the concept’s launch at the Frankfurt Motor Show later this year. The SLC’s most striking feature (at least on the coupe) is the Gullwing doors, reminiscent of the original 300SL.

Chrysler posts $370 million net loss on costs tied to repaid loans

Tue, 26 Jul 2011

Chrysler Group LLC, after recording its first post-bankruptcy profit three months ago, posted a net loss of $370 million in the second quarter due to costs tied to the repayment of government bailout loans. Chrysler incurred a charge of $551 million in paying back the U.S. Department of Treasury and the Canadian loans that kept the automaker afloat in 2009.

2040Parts.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.292 s, 11212 u