Find or Sell any Parts for Your Vehicle in USA

2005 2006 2007 2008 Toyota Tacoma Overhead Console Compass/temp Display Repair on 2040-parts.com

US $16.99
Location:

Lexington, North Carolina, United States

Lexington, North Carolina, United States
This auction is for a rebuild of your Module You are not purchasing a new unit You must send yours in for repair. Ignore the shipping times it is due to ebay policy I will return ship within 24 hrs of receiving.
Placement on Vehicle:Upper Manufacturer Part Number:83290-04030 OE Spec or Performance/Custom:OE Spec Warranty:5 Year Interchange Part Number:83290-04011 UPC:Does not apply

IF YOU HAVE A 2005-08 TOYOTA TACOMA WITH A DIM, BLANK OR INTERMITTENLY LIT COMPASS/TEMP DISPLAY THEN THIS AUCTION IS FOR YOU!
PLEASE IGNORE SHIPPING TIMES AS IT IS DUE TO EBAY POLICY BECAUSE THIS IS A SERVICE AND IT HAS TO ALLOW FOR  THE TIME IT TAKES YOU TO SHIP YOUR MODULE TO ME IT  WILL BE SHIPPED BACK OUT WITHIN 24 HRS OF RECEIVING IT MON-SAT.

NOTE: THE BURN/SCORCH MARK IN THE CORNER OF THE DISPLAY IS NORMAL AND IS NOT AN ISSUE.

WE WILL FULLY REBUILD BY REPLACING BAD PARTS AND REINFORCING  PROBLEMATIC AREAS. 


YOU WILL NEED TO REMOVE YOUR UNIT AND SEND TO US PLEASE DO NOT PURCHASE THIS AUCTION UNTIL YOU ARE READY TO SEND THE UNIT!

FIRST YOU WILL REMOVE THE PHILLIPS SCREW INSIDE THE SUNGLASSES HOLDER THEN YOU WILL PULL DOWN AT THE FRONT OF THE CONSOLE CLOSEST TO THE WINDSHIELD WHICH IS HELD BY CLIPS THEN YOU CAN PULL DOWN ON THE REAR THEN DISCONNECT THE HARNESS, ONCE YOU HAVE THE PLASTIC CONSOLE  DOWN YOU WILL NEED TO REMOVE 3 #10 TORX SCREWS TO REMOVE THE MODULE FROM THE HOUSING, YOU WILL ONLY SEND THE DISPLAY MODULE.

THE DISPLAY MODULE NEEDS TO BE PACKAGED CAREFULLY WITH BUBBLE-WRAP OR SUFFICIENT PADDING ATLEAST A COUPLE INCHES ALL THE WAY AROUND AND SENT IN A SMALL BOX, THESE ARE VERY EASILY DAMAGED IN TRANSIT PLEASE BE THOROUGH!

THERE IS NO ISSUE WITH DRIVING YOUR TRUCK WHILE CONSOLE IS REMOVED

SEND TO:

BRIAN STONE
201 Beaver Creek Rd.
Lexington NC 27295

IF YOU HAVE ANY QUESTIONS YOU MAY REACH ME AT 336-414-2200 TEXT WILL GET QUICKEST RESPONSE, YOU MAY ALSO MESSAGE ME THRU EBAY
 
               THANKS FOR LOOKING !!


Concept Car of the Week: Saab 9X (2001)

Fri, 05 Jul 2013

With a glorious heritage, a strong and understated design philosophy combined with a focus on technology and innovation, it is sad to have witnessed how GM's questionable management led to Saab being completely wiped off the map in just a decade. The vision of what this iconic brand could have been still haunts many car enthusiasts around the globe. The 9X concept is, along with the AeroX, one the most exciting concepts produced by the Swedish manufacturer.

Bentley W12 (and Audi and VW) engine production centres on Crewe

Fri, 21 Mar 2014

The VW Group W12 engine will now only be made by Bentley in Crewe It’s probably not something you’ve paused to think about much, but if you did you’d assume that the Bentley W12 engine – fitted to the Flying Spur and Continental GT as well as the Audi A8 and VW Phaeton – was made only in Crewe. But you’d be wrong. In fact, the W12 for Bentleys are made in Crewe but those used in the Audi A8 and VW Phaeton are actually built by VW at their engine plant inĀ Salzgitter.

Porsche 998 (911) caught testing

Thu, 22 Jan 2009

The current version of the 911 has not long been refreshed, and still has more to deliver. Only the Carrera and Targa have had the facelift so far, and still to come is the Turbo, not to mention the GT3. But Porsche is already a long way down the road with the next generation 911 (998), which is not expected to launch until 2011, as you can see from this spy shot taken in rather chilly Arctic climes.