Find or Sell any Parts for Your Vehicle in USA

2005 Ktm 300 Mxc Foot Pegs Rests Footpeg W/ Hardware 250 Sx Exc Xc 125 200 380? on 2040-parts.com

US $12.28
Location:

Port Charlotte, Florida, United States

Port Charlotte, Florida, United States

Parts from:  2005 KTM 300 MXC, Bike was in very nice condition with low hours on it. No test ride available as it was robbed of a few important parts. Original owner stated it was 100% working condition prior to it being stolen and recovered after but minus cdi/cylinder/subframe. 

Auction for:
Pegs, one broken ....... .. Used parts, Sold as Pictured clearly. . 

High wear items like bearings, seals, vales, clutch plates, brake pads are not guaranteed to be good. If I see a leak or can tell a part is bad it will be noted, but there may be a time that a bike doesn't show any signs of a hard rubber seal, gritty bearing or thin clutch plates. 


Please research YOUR fitment needs to verify this part will work for YOUR bike..  Models fitment MAY OR MAY NOT include other models besides what is listed as original source. I can only confirm year/make/model the parts came from as a direct fitment, any other make/model/year is up to buyer to confirm it is what they need before purchasing. MAY FIT other models years like EXC XC SX MX DXC ADV 125 250 300 400 450 520 525 540 625 640 950 990
Seller's policies and disclaimers:

1. Item specifics: All items are sold AS IS and AS PICTURED. Item condition is shown in pictures and stated by ebay as either NEW, USED or For Parts. Used parts are just that, they are not perfect and will have defects as shown in pictures. Items listed as For Parts are from a unit that was not running condition and could not be 100% tested.

2. Fitment of parts: Listed clearly is the Year, Make and Model of unit that the part came from or with. I will provide part numbers and possible other fitments if i can, but it is buyers responsibility to confirm its the part they need before purchasing anything from me.

3. GO TO SHIPPING TAB FOR ALL OPTIONS AND COSTS..    I give shipping options ranging from SLOWEST-Parcel Post to FASTEST-Express and some inbetween. If you purchase the parcel post shipping expect it to be the slowest, if you want it faster purchase a faster option such as priority or express or ups or fedex.. ONLY YOU have the option to pick how fast you want it...  NO UPS to P.O. Boxes, choose another option

4. International buyers:  I am more than happy to ship items internationally, however please understand the following:  Import duties, taxes, fees and charges are not included in the item price or shipping cost.  These fees are the buyer's full responsibility.  
      Buyers please check with your country's customs office to determine what these additional costs will be before you bid or purchase anything.  Customs fees are normally charged by the shipping company or collected when you pick up the item.  These are not additional charges on the shipping service.  I will not declare a lower value on the 
      merchandise or mark the item as a gift on the customs forms. To do so, is against U.S. and international laws. -Due to to unreliable online shipping quotes, Shipping costs may be more or less then stated or quoted. We require international buyers to use PayPal. International buyers are responsible for any duties and/or taxes charged by their
     country upon delivery. Shipping costs and transit times may be significantly higher or longer than domestic shipments. Sometimes no tracking feature is available. Your counties customs inspection procedures may slow the estimated delivery time provided by the carrier. All customs forms are marked merchandise or used merchandise accordingly.
     There is a shipping calculator on the listing that draws shipping charges directly from usps.com. Please view the shipping cost and take it into consideration before placing your bid. We reserve the right to cancel your bid or the sale if your country's shipping restrictions prohibit the auction item for any reason (i.e. size, weight, etc.)

5. There is NO BEST OFFER OPTION, Please don't email me with any offers. Items sometimes have a small market and they are priced competitively from the start, there is no race to give away parts for practically nothing. 

6. Return Policy and Procedure:
    1.Item must be returned and in exact condition as shipped out in.
    2. Transaction cancellation request will be made and buyers must cancel the transaction before any refund will be made.
    3. IF transaction is not cancelled there is an additional 10% of total that will be subtracted from refund amount to cover ebay fees i'm chaged since the transaction wasn't canceled.
    4. Restock fee of 20% is standard
    5. If item is damaged in shipping it is a matter for the shipping insurance and not something that should be returned.
    6. If theres a problem that is indisputably my fault there will be no restocking fee.  
      In review: I have no problem accepting returns if you made a mistake, but I am charged fees by both paypal and ebay for the sale so there is a restocking fee of 20% and if you choose not to cancel the transaction the restocking fee is 30%

Update on International shipping: USPS will no longer let sellers ship to certain countries online. This means each item must be taken to post office and be paid for at post office at higher than online prices. There is a small handling fee that will cover the extra costs involved in manually shipping the items. Not much we can do really as USPS is the only one that will ship internationally for a low cost. 


Shipping costs have been raised by close to 10% every year for the past how many years, they go up every year so don't think what you got a part shipped for 3 years ago will be the same as today..  
Please don't complain or give sellers bad feedback because of these higher than last year shipping costs, I do not make any $$ on shipping costs and if anything sometimes lose $$ because we are charged by the auction company a percentage on the sale price and also on the shipping costs.. 



Auctions for item listed as "FOR PARTS NOT WORKING": These items are sold AS IS, they were not able to be tested or have Damage, Repairs, More then normal wear. These are Sold EXACTLY as pictured and AS IS, NO Returns or Refunds.. They are priced at CLOSEOUT and DISCOUNTED for someone to use as parts.. They are NOT expressed as perfectly good working parts!.

Ebay Compatibility system and doesn't work properly, so the ONLY vehicle listed will be the exact year/make/model the parts came from.. Use dealers, online parts number searches or if all else fails ask me and I can look up part number and let you know if they match another year/make/model..  Fitment is fairly easy to confirm when comparing the part numbers given on a specific part between the unit it came from and the unit you want to use it one.






 photo SCS1_zpsa48bb5c8.jpg
 photo 05mxc300_zpsfaa93314.jpg
Items purchased 11/19/14 through 11/27/14 will NOT be shipped out until 11/28/14.
Go to SHIPPING tab to see all shipping options and costs (sometimes another option is much cheaper then the standard shipping option shown first)
Give us a call monday through friday 8 a.m. to 5 p.m. Eastern Time for questions or the best price possible (339-298-7489) Text is fine also but keep it within reasonable times of the day please.

Pedals & Pegs for Sale

Fancy driving Hyundai’s Hydrogen ix35 Fuel Cell?

Fri, 05 Oct 2012

As part of the European Hydrogen Road Tour, Hyundai are offering members of the public the chance to drive the ix35 FCEV. As we revealed back in August, the Hyundai ix35 FCEV – Hyundai’s hydrogen-powered electric ix35 – is going in to production before the end of 2012, the first proper production fuel cell vehicle…in the world. The initial production run is small – just 1,000 cars – but Hyundai are planning to put the ix35 FCEV in to full production by 2015, by which time they’re hoping there will be a viable hydrogen refuelling infrastructure in place.

Porsche 918 Spyder microsite goes live

Tue, 25 Jun 2013

Porsche is entering the hybrid-hypercar market this fall with its pretty 918 Spyder. We saw the first concept 918 way back in 2010, and we've been seeing official photos and video of 918 pre-production mules testing for quite a while now. The early impressions of the driving experience are in, and from what we understand, it's pretty incredible.

Futuristic, self-balancing Gyro-X to be restored

Wed, 27 Feb 2013

Alex Tremulis was an eclectic visionary who saw the future in swoops, curls, bubble tops, and hand-formed metal. At the precarious age of 19, without any training, he landed at Cord Automobile and helped develop the legendary Model 810. In the 1940s he penned the Tucker and the Chrysler Thunderbolt.