2007-2013 Toyota Tundra Venom Style Functional Ram Air Hood"original Ait"genuine on 2040-parts.com
West Covina, California, US
100%AUTHENTIC PRODUCT
PRODUCT DESIGN:
VENOM STYLE
- FITS 2007-2013 TOYOTA TUNDRA
- Includes
- X 1 FULL REPLACEMENT HOOD
- 100% Genuine
- Hand Crafted
- Brand New
- Pliable FRP(fiberglass reinforced plastic) Product
- Gel-coat finished
- Aluminium mesh grill insert included where applicable
- Funtional Vent
- Uses factory hinges and latch
RAM AIR Fiberglass Hood High Grade A+
Fully Functional Vented Heat Extractor
Material
( FRP ) FIBERGLASS REINFORCED PLASTIC
AIT Plastic resins -AIT special plastic resin is a hybrid form of polyester resin which has been toughened with epoxy molecules within the main molecular structure. AIT resins offers better resistance to moisture absorption than regular polyester resins.
Gelcoat - provides high impact strength, excellent gloss, it is water resistance and helps prevent blisters from forming after laying the fiberglass mat.
Benefits of Fiberglass:
- Does not expand or shrink with temperature change.
- Does not absorb water.
- High strength to weight ratio.
- Non-flammable.
- Chemical resistant (except for hydrofluoric, hot phosphoric acids, and strong alkaline substances.)
- Electrical insulator
Vinyl Ester Resin - This gives superior flexibility and strength than that of polyester resin.
Multi-Layer Fiberglass - Our pieces have 4 oz. layers of hand-laminated fiberglass with a plastic gel coat finish.
Strong Gel Coat Finish - This results in a SMOOTH finish and adds extra strength to the part! Please be careful because other manufactured finished body kit parts will have orange peel rumples.
Fitment - Our pieces have a much BETTER QUALITY fit when compared to competitor products.
SHIPPING PRICE: IS FOR lower 48 states.
FOR Hawaii, Alaska,Puerto Rico,Canada and ALL International areas will require us to obtain individual quote from our freight carrier.
* Please make sure you provide your correct info for shipping CORRECT NAME,ADDRESS AND VALID TELEPHONE # , YOUR ORDER WILL NOT SHIP UNLESS YOU COMPLETE ALL CORRECT SHIPPING DETAILS
*We are not responsible for any extra costs caused by incorrect shipping information.
*If you have any question like changing your ship to addres, Please contact us within 24 hours after you paid
*We do not deliver to APO/FPO/PO BOX OR MILITARY BASES, please provide your physical Shipping address. We deliver to both home or business locations.
*All listings advertised are for ship out only, if interested in doing a local pick up price varies . Please email us through eBay for WILL CALL PRICING
Shipping Damages
Please inspect the item upon delivery before signing the receipt.DO NOT SIGN UNTILL YOU INSPECT ITEM(S) Make Sure You ->Refuse delivery if the item is damaged and make sure you note refused do to damages upon freight & we will reship you a new Item(s)asap! as long as you follow proper instructions
*Contact y2kzigzag within 24 hours to file a claim request.Please make sure to include your item # Failure to comply with this policy may result in a denial for damage claim.
*All returns must be approved before you ship any item back to us.Return item must be issued by y2kzigzag *If you ship an item back to us without contacting us prior to shipping, we will refused
*Shipping, handling, and insurance charges are not refundable.
*All Order Returned will be charged return shipping.
*All returns are subject to a minimum of a 20% restocking fee.
*All shipments are made with a signature required.
*All our products requires professional installation and is highly recommended. Buyer assumes all risk on shipment and usage. All items are as is with no warranty
*images are for references only. If you are looking for a exact specific vent or grill, please contact us before making your purchase. Aerodynamics and ground effects are shipped unfinished and requires prep-work & priming before painting
INSTALL & FITMENT
Before you start, please make sure you have the proper safety equipment to avoid potential harm to you and your vehicle.
FRP Composite/Carbon FRP Composite hood installation can relatively be an easy process; anyone with a little mechanical knowledge should be able to install parts in a few hours. Tools are also very standard, and if you have taken your factory parts before, replacing it with an aftermarket piece should be no trouble at all.
- Remove factory hood from the bolts at the end of the hinges. (Do not remove the hinges)
- Install new aftermarket hood by reverse process.
- Tighten bolts to just enough torque to hold the hood in place, but lose enough to be adjusted by a tug.
- Remove hood latch and check alignment.
- If the hood is not aligned properly, adjust accordingly and tighten bolts at the hinges.
- Re-install hood latch and adjust for fitment. (If the hood is latched but not fully close, the latch might need to be adjusted shorter. If the hood does not latch down, the latch might need to be adjusted longer.
- Check for fit and you’re done.
Note: Installation of hood at your own risk. We advise hood pin for ANY aftermarket hoods. Even though we sell hoods as off-road and show purpose only, we recommend hood pins if it’s going to see any type of road use.
Payment Method:
PayPal
*We accept PAYPAL as only payment method. All item(s) will be held 3 days for payment with an unconfirmed address.
*Unpaid auction will be forfited and unpaid dispute will be filed to ebay.
*All payments are expected within 7 days after the last winning auction is closed.
* If other payment method, please contact us prior to placing a bid.
*For all California state buyers must pay sales tax.
CONTACT US
email us through ebay
If you have any questions or concers please send us a message and we will reply back as soon as possible within 24 hours.
Please make sure to leave us possitive feedback.
TERMS & CONDITIONS
All products sold are aftermarket products and intended for off-road or show use only. Vendor is not liable for any damages or injury as a result of these products. Purchaser is responsible for complying with any/all local, state, and federal laws regarding the addition or modification of parts. We disclaim any liability from the removal of reinforcements, bumpers, turn signals, and other safety equipment on the vehicle. Professional installation of body kits and body related parts (i.e. bumpers, side skirts, hoods, fenders, etc.) is highly recommended. Hood pins are highly recommended for aftermarket hoods. Vendor is not responsible for any items damaged during installation.
Body Kits for Sale
- 2005-2009 pontiac g6 4dr.sedan concept full body kit "original ait" 100% genuine(US $465.00)
- 2002-2004 infiniti g35 4dr full bodykit"duro flexi"original ait"genuine product"(US $345.00)
- 08 09 10 11 12 nissan altima 2dr.coupe gtr front bumper with carbon fiber lip(US $375.00)
- 1992-1995 honda civic 2dr coupe r33 full body kit "duro flexi" 100% original ait(US $285.00)
- 2000-2005 lexus is300 db9 carbon fiber hood "new"original ait"genuine prodcuct"(US $475.00)
- 1994-2001 dodge ram venom style functional ram air hood "100% genuine" original(US $395.00)
World Car Design of the Year 2014 award shortlist revealed
Wed, 12 Feb 2014The BMW i3 and Volkswagen XL1 are amongst the contenders for the World Car Design of the Year award as the top 10 finalists in each category of the tenth annual World Car Awards are announced. The full shortlist of nominees for the 2014 World Car Design of the Year Award are: BMW i3; Cadillac CTS; Citröen C4 Picasso; Lexus IS; Mazda3; Mercedes-Benz C-Class; Volkswagen XLR1; Cadillac ELR; Range Rover Sport and Volkswagen XL1. As in previous years for the World Car Design of the Year award, a panel of five design experts reviews all candidates before writing up recommendations for the jury of 69 international automotive journalists to consider.
Alan Mulally joins ‘Innovation power panel’ Keynote at CES
Wed, 11 Jan 2012An ‘Innovation Power Panel' Keynote was the highlight of the second full morning of the 2012 Consumer Electronics Show (CES) in Las Vegas. Underlining the importance of this event to the automotive industry, and the importance and weight the automotive field now carries in the consumer electronics sphere, Alan Mulally – President and CEO of Ford motor company – was part of a three-person panel exploring how companies innovate, cope with failure and the relentless pace of change in the electronics world. Mulally was joined by Ursula Burns, Chairman and CEO of Xerox Corporation and John Stratto, Enterprise Executive at Verizon, the US telecoms company.
Green Light For More Smart Motorway Schemes
Wed, 09 Jul 2014THE Government has announced plans to speed up journey times on selected parts of the nation’s motorway network. As a result, work will start to convert the hard shoulder into a running lane on two sections of the M1 and on a stretch of the M3. The M1 work will be between junctions 28 and 31 in Derbyshire and between junctions 32 and 35a in South Yorkshire, with claims that it will boost capacity by up to a third and improve journey times by up to 10%.