Find or Sell any Parts for Your Vehicle in USA

2007 Mercury Outboard 115 Optimax 20 Or 25" Shaft , 1 Year Warranty on 2040-parts.com

US $5,895.00
Location:

West Sunbury, Pennsylvania, United States

West Sunbury, Pennsylvania, United States
“WHEN WE SAY REMANUFACTURE WE DO NOT MEAN ( CLEANED UP USED OLD PARTS ) WE MEAN ITS BEEN DONE RIGHT!! NEW Pistons ,NEW rod bearings, NEW rings , NEW wrist pins & bearings, NEW main seals , NEW lower unit seals and water pump, NEW paint( base clear coat) no buzz bomb!!, Warranty,The list goes on and on !!”
Brand:Mercury Stroke:2-Stroke Manufacturer Part Number:ELPTO OPTIMAX Engine(HP):115 Core Charge:0 Country/Region of Manufacture:United States

OUTBOARD REBUILD

 **REMANUFACTURED OUTBOARDS & POWERHEAD REPLACEMENT

SINCE 1972 - OVER 35 YEARS IN THE OUTBOARD FIELD

QUESTIONS  724-290-0509

1 YEAR WARRANTY 

You are bidding on a 2007 MERCURY 115 OPTIMAX . 100% remanufactured powerhead with zero hrs and a 1 year warranty, this motor is 20"but we can convert into a 25" for any offshore application.  

Please allow up to 10 days for delivery. 

WE ship nationwide or motor can be picked up in Pittsburgh Pa, Annapolis MD, Long Island NY , DeLand FL, FL KEYs, Orlando Fl, Austin TX


Message us through eBay for a written copy of our warranty.


In this day of internet outboards and so call remanufactered engines with there buzz bomb paint jobs and so called "tune ups". what are you getting ?? Was this motor sunk ? Was the engine patched back together ? Was the Engine run in saltwater ?


This is where we here at Outboard Rebuilder give you the piece of mind knowing that we have COMPLETELY REMANUFACTURED our engines, then back it up with a 1 year warranty!!! We have not found another "used" outboard dealer That will match our 1 year warranty!



ALL OUR REMANUFACTURED MOTORS 30hp to 250hp receive the same treatment whether it's a 1983 or a 2007 . Your as-new motor is completely machined by our ultra modern machines- no short cuts !!!

  • All cylinders machined and diamond honed
  • ALL surfaces machined then high pressure washed and cleaned,
  • ALL NEW pistons are precisely fitted and plateau diamond honed. 
  • Crankshafts are remanufactured back to factory specs with 
  • NEW bearings
  • NEW oil pump, fuel systems are completely cleaned in our ultrasonic cleaner then computer re-calibrated.
  • ALL Injectors are all ultrasonic cleaned / back flushed and new seals are installed
  • All electronics are inspected and tested as well as the trim system. 
  • The lower unit gets disassembled then factory clearances are checked along with all internal parts then its reassembled with new seals and water pump. 
  • New thermostats, 
  • NEW BASE COAT CLEAR COAT paint 
  • NEW decals
  • we run your motor under power in our outboard test cell and is put it a through a preliminary break-in so when you receive your motor it's ready to go boating

WE ARRANGE SHIPPING by Fed-Ex FREIGHT exclusively and the utmost care is taken to ensure you receive your motor in good condition. 

For shipping quote TOLL FREE 877 983 2537

NOTE: SEASONAL DELAYS OF UP TO 10 DAYS MAY OCCUR

=================================================================================


I wanted to show just a few of our testimonials that we have received in the past 35 years of rebuilding and selling remanufactured motors and powerheads:


Hey Mike, hope everything is going well for you. Just wanted to thank you for the smooth transaction of my Pro XS purchase. It was a long trip up there but it was worth it! Also it was a good decision to just drive up there and swap motors instead on shipping them back and forth. I took your advice and broke in the motor nice and easy. The motor runs like a champ now. This motor has plenty of power and gets way better gas mileage than my old one. I will be sure to recommend your services to all my fishing buddies!

 
 On a side note, I have fished 2 tournaments out of the boat and cashed a check both time, one 2nd place and one 9th. I included a link to one of them. Show this to you dad, he will get a kick out of. Thanks again Mike.
  


It has been a pleasure doing business with you and Outboard Rebuild !!!

I could not use the additional parts that was sent with the motor and Dawn quickly credited my account. 

It took four weeks to complete the fabrication of the off-shore bracket and installation of the Optimax 225. The motor break-in was started on Nov. 23, 2013 under the supervision of my mechanic. His assessment of the motor was stellar.

Thanks again
Happy Sailor Floyd



Hey Mike and Crew, 

I just wanted to throw a little feedback your way after getting home with my "New" motor.  YOU SAY THAT "YOU STRIVE TO SEND OUT THE BEST PRODUCT AT A GREATLY REDUCED COST"  YOU HAVE DEFINITELY ACHIEVED THAT GOAL!!!  I would just like to say that I was very impressed with your first class operation.  You guys really have your game nailed down.  Everyone there had a part to play and played it perfectly like a well oiled outboard!  Anything positive that can be said about the business you are in applies to Ooutboard Rebuilder!  375 miles each way to your shop, $445.00 round trip in gas and killing my body with all the fast food along route 80 west was totally worth it!  As long as you guys are up and running I really don't understand why anyone would buy a showroom motor when they can purchase one of yours and especially when you can't tell the difference between yours and a showroom motor.  Awesome Prices, Awesome customer service and Awesome Quality!!! 

                                                                Thanks so much,  
                                                                 Louie G  W.  Milford, NJ


I bought a 1999 90 hp Rebuilt Johnson from you;s, 1-1/2 years later this motor runs like a brand new one. Power-more than a new motor, starts every time and I fish in very cold weather and heat, never shuts off once its running.
Right after I bought this motor it developed a miss, one call to these folks and I returned to be treated very nicely and the motor was fixed by replacing a part, NO CHARGE!


I will never buy a new motor as long as these nice dependable folks are rebuilding outboards, I would recommend Outboard Rebuild to anyone who needs a rebuilt, you will be treated well and end up with a better than new motor, My life depends on this motor to get be back to the dock and it has.
Thanks for a product keeps working and if I ever need motor help, you's have my business. (James R - PA)


Just a quick note to say thanks again for the excellent service. I installed the YAMAHA 90 on my boat and it has been used four times since. It runs better than ever. It is quieter and it has more power. A special thanks to Brian and Stan for the work they did. I won't hesitate to recommend you guys.
(Doug T - GA)


I just wanted to thank Mike Sr. and everyone for the help you guys gave me with the trim tilt on my 2000 Johnson 50 hp out board. You guys completely rock. I got everything back on the boat yesterday, bled and filled the trim tilt unit and took the boat out. Everything is working perfectly. Thank you all again. I am recommending you to everyone I talk to who is looking to buy an outboard.
(Steve - FL)


Awesome rebuild! (Yamaha 225 VMAX) Better than when Brad bought the boat. We went out Tuesday and broke the motor in. It runs smooth as silk, better than when it was new. (Bill - Greenville, SC) 


I bought a 1998 Mercury 150 EFI from your company in June of 2007, This engine has run like a top from day 1. I have sent three of my Blass Club friends up to have rebuilds done and all three used your "while you wait" service (in by 9 out by 4) and so far Outboard Rebuild is batting 1000.  
I just wanted to say thanks again. (RF - New Rochelle, NY)

Last year you guys rebuilt the powerhead on my 1993 Johnson 115. I take the boat out weekly and have not had a problem at all with the rebuild even after putting over 100 hours on the motor. 
Mike, Jr and the ladies in the office were very helpful during the whole process. Thanks! (SG - Dry Prong, LA )


I may have had some anxiety in purchasing my Remanufactured OptiMax 225 sight unseen 6 months ago, but it has met all the claims BlackBird ind makes and it's exceeded my expectations after 50+ hours of off shore operation. It runs like new (strong and dependable)! Your recommendation of using Terry in Deland as an installer worked out great as well. He knowledge is vast and work is quality. I appreciate Mike keeping his word in all transactions like sticking to the trade-in-price on my old motor. I will surely recommend your product to all friends and associates. 
Thank You. (JT - Clearwater, FL)



Thanks, blackbird  mike for the rebuild on my 2002 175 Johnson outboard. This thing is faster then ever. We got to there shop at 9am for a complete rebuild ( wile i waited ) Dan had our powerhead off in 30min , 5 hrs later i was heading home to Maryland with a complete rebuild. It has been 7 months and this motor is smooth and FAST we took mike's advice and had them do the mild mod's and man am i glad this picked up 400 rmp. from 5500  to now 5900, this thing will run with  225's all day long!! Ray from.  Baltimore, MD

 


THE BEST, what else needs to be said, AAA+++, Unbeatable service and price!!! 


2007 300ProXs Mercury High Performance 20 Bad Boy (#160405270097)



US $9,000.00 

 



More Positive Feedback:
The Johnson 90 hp runs as smooth as a brand new motor. You guys really know how to rebuild a strong outboard, it pushes our 24ft. pontoon three times faster than the old 60 horse Merc. that originally came with the boat. We are very satisfied with your product and service. (TB- Henderson, NV)



Testimony from a valued customer:

Sent my sick 1997 Force/Merc 120 to One Outboard for a Power Head Overhaul. Two weeks later without hesitation my Power Head was returned in the same pallet I sent (which I requested) the head cleaned, overhauled and ready to go. I installed this the same day and had a Marine Mechanic assist in the rigging. Started up first attempt and it sound awesome. Had it on 
the water for a ten hour break- in within two weeks. Now have about 40 hrs on it and running like a champ. I would recommend Outboard rebuild to everyone who has a problem with their engine or power head. Thanks to Mike and his knowledgeable crew and customer service I’m enjoying South Texas clear water and outstanding fishing. (RB- DelRio, TX)



Hard to believe that you would go anywhere else .In the past we have sent motors to Texas, Fl ,Georga even the factory rebuilds was really getting discouraged with the whole rebuild thing . Four years ago we started to use Blackbird for our motors ,What a difference. They go out of their way to help us ,their service is great our rental business dosent have near the down time....Rob

WE CAN ARRANGE SHIPPING by Fed-Ex FREIGHT and the utmost care is taken to ensure you receive your motor in good condition. 

Questions on shipping call 724-290-0509

New Volvo Concept at Geneva Motor Show. But what is it?

Wed, 12 Feb 2014

The Volvo XC Coupe Concept (left) and Coupe Concept will be joined by a third concept at Geneva Now Volvo has its new Scalable Product Architecture (SPA), and its new Drive-E engine range, heading for production they’ve been planning three new concepts to show off the possibilities the new architecture and engines promise. The first of those was the very appealing Volvo Concept Coupe which debuted at the Frankfurt Motor Show last year as a 21st century take on the classic Volvo P1800. With stunning looks, a new nose evolved from the earlier Concept You, floating grill and slim headlights, the Concept Coupe also came with a 4WD drivetrain powered by a 2.0 litre petrol and an electric motor for an output of 395bhp.

1.7 million drivers consider insurance fraud

Fri, 18 Jul 2014

1.7 MILLION drivers in the UK would consider making a fraudulent insurance claim after an accident. Even if they were not hurt or not badly injured, these drivers believe it is acceptable to claim compensation. Research by Gocompare shows 6% of UK drivers would consider making a false claim, while 3% would do whatever they could to claim money from an insurer.

Buy a Spyker Bond and get a cheap Spyker B6 Venator

Mon, 10 Mar 2014

Buy a Spyker Bond and get a cheap B6 Venator (pictured) Last year, Victor Muller seemed to have pulled off something of a coup for Spyker by delivering concepts of the B6 Venator Coupe and Spyder to much acclaim, which looked like a car that could kick-start Spyker’s rather troubled business model. After a foray in to Saab ownership, Victor Muller lost Spyker to CPP, but CPP’s reliance on finance from Victor’s pal Vlad the banker proved to be CPP’s downfall and Victor emerged, somehow, back in control of Spyker. But despite Victor’s legendary ability to schmooze finance from the most unlikely sources, it seems he’s run in to a bit of trouble with financing production of the Venator, so he’s come up with a plan that looks to be a cross between a lottery and crowd funding.