Find or Sell any Parts for Your Vehicle in USA

250 Lb Plastic Acrylic Type V Blasting Media 16/20 Sandblastin Military Aviation on 2040-parts.com

US $575.00
Location:

Novi, Michigan, United States

Novi, Michigan, United States
Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ... Brand:U S Technology MPN:Poly V Model:T-5 Acrllic 16/20 Grit Military MIL-P-85891(A) Country//Region of Manufacture:United States UPC:Does not apply

250 lb. Plastic Acrylic Type V Blasting Media 16/20 Sandblasting Military Aviation

Acrylic Type V Plastic Media Blasting (PMB)

Mil-Spec MIL-P-85891(A)

You are bidding on 250 lb. Plastic Acrylic Type V Blasting Media 16/20 Sandblasting Military Aviation.

http://www.ustechnology.com/polyv.htm FACTORY LINK

This media is manufactured from acrylic and is designed to solve today's coating removal and surface preparation problems.

POLY V® is custom engineered to provide rapid coating removal, minimal substrate abrasion, and high reusability.

POLY V® combines the characteristics of durability, gentleness and speed which translates into a low cost alternative to chemical stripping and sanding of products.

The durability of this product translates into lower media consumption and less dust when blasting. This non-hazardous material is Mil-Spec grade MIL-P-85891(A).

It is specifically designed to remove coatings from most sheet aluminum, fiberglass and composite surfaces as well as to deburr plastics, ceramics and soft metals.

Ideal for aircraft components, it is also excellent for powder coating removal from pultruded aluminum parts, thin fiberglass components, thin gauge metals, and of course, aircraft components.

·       UST Trade Name: Poly V

·       Mil Spec: Type V

·       Type of Material: Acrylic

·       APPEARANCE: Granular

·       COLOR: White to Light Grey

·       MOH HARDNESS: 3.5

·       BARCOL: 46-54

·       SPEC. GRAVITY: 1.15 ~ 1.20 (gms / cc)

·       Bulk Density (lbs/cu.ft.): 45-48

·       Max. Operating Temp. (deg. F.): 200˚F

·       Chemical Nature: Inert

·       APPLICATIONS: Paint Stripping ▪ Primer Removal ▪ Blast Cleaning

·       USED ON: Aircraft ▪ Cars ▪ Boats ▪ Fiberglass ▪ Steel

·       INDUSTRIES: Automotive Restoration ▪ Aircraft Maintenance ▪ Paint & Coatings ▪ Military

·       MESH SIZE: 16/20

·       MIL-SPEC Grade: MIL-P-85891A

 We don’t have capability to test this device to manufacturer’s specification; by purchasing the item the buyer is taking full responsibility of making sure the device meets its performance specifications before use (Please see under "Policy" below for full medical device disclaimer). E-mail us with any additional questions. Thank you.

Payment:

We accept most forms of payment including: Credit Cards, Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery.

You can pay with credit card over the phone (248-752-5084).

Return Policy:

Within 14 days after receiving this item and if you believe that we mis- represented it, please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You

SHIPPING:

This item has a combined shipping weight of 290 pounds strapped, wrapped and palletized and will be shipped Common Carrier. Check with us for shipping options and rates. We combine shipping on multiple orders.

There is no charge for pick up at our Northwest Detroit Suburb location.

You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. specequip at spectorequipment.com 248-752-5084

 

Ebay Medical Disclaimer: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller: Spector Equipment (specequip), is a re-seller of medical and other surplus inventory. We are located in Novi, Michigan. Our phone contact is 248-522-7930

Spector Equipment POLICY: We DO NOT test or certify the equipment being sold. It is up to the purchaser to meet all requirements and regulation certification processes that deemed necessary per FDA or any other regulatory agencies that may be applicable. If you purchase medical, laboratory or any equipment that will be for PATIENT use, it is the BUYERS responsibility to have the equipment certified, tested or inspected prior to patient use. No exceptions. By purchasing an item you agree to the following: We (Seller) do not state or imply the usage of the item being sold. Prior to using the item individually or on a patient, you (Buyer) will seek if applicable the manufacture or your personal/medical care/health care provider for full details on proper usage of the item, instruction for fitting and wearing of an item if applicable, maintenance/operations, care of item or any regulatory requirements for the item. You (Buyer) of the item agree to use this product at his own risk and agree to hold harmless seller, and release owners, operators and manufactures from any damage /liability he may incur due to the use of the item.

WARRANTY: The item is being offered as-is, guaranteed to be equivalent to that pictured and as described under: “INCLUDED IN SALE” and “ITEM CONDITION” in above description at delivery to customer (if shipped) or at pick up at our location (if hand carried out). No additional time warranty, usage period warranty, or any other guarantees are being offered, expressed or implied. If item is not equivalent to that described / pictured in the listing at delivery or pick-up, customer is entitled to full refund of the purchase price minus any applicable shipping charges. If shipped back the item must be securely repackaged and back within 14 days from delivery in order to receive the refund. The item description and specification are obtained best to our knowledge from available manufacturer and other public information and are provided for reference only. Bidders are responsible for researching the item meets his/her expectations prior to bidding. Asking questions prior to bidding is highly encouraged. Customer satisfaction is our number one priority. Please contact us if there is an issue w/ the item you have received, we will do our best to correct any problems that may arise.

Ebay Policy: “Your bid is a contract – Please bid only if you're serious about buying the item. If you are the winning bidder, you will enter into a legally binding contract to purchase the item from the seller. You should contact the seller to resolve any questions before bidding”

 

Time Warp Volvo 340 To Sell At Auction

Wed, 26 Mar 2014

IF you’re not a fan of modern cars then a ‘time warp’ Volvo 340 that’s surfaced after years of inaction could be the car for you. On the bill at a forthcoming classic car sale at Anglia Car Auctions on Saturday April 5th, this 132 mile Volvo hasn’t even been run in and, according to the auction house, comes complete with that distinctive new car smell. The car was bought brand new from Lancaster Volvo and was barely used by the original owner.

GM turns to its old product meister for a new marketing message

Mon, 13 Jul 2009

It has taken years of effort--and a swift trip through U.S. Bankruptcy Court--but General Motors is finally close to its goal. It has shed billions of dollars in legacy costs, fixed quality and improved design.

Jaguar reveals first ‘new’ lightweight E-Type

Tue, 12 Aug 2014

CLASSIC car fans and speculators alike will be rejoicing as Jaguar has revealed the prototype of its ‘new' lightweight E-Type. Six further examples will be built by Jaguar Heritage and sold as period competition vehicles, using previously unused chassis numbers to give them true authenticity. In 1963 Jaguar started the 'Special GT E-type' programme to build 18 lightweight racers, but only 12 were ever made.