Purchase 2AWG BMW E28 E30 E31 E34 Engine to Chassis Upgrade Ground Cable. #2GND16 in Martinez, California, US, for US $28.00

Returns Accepted:ReturnsNotAccepted Part Brand:Royal Excelene

Is your Engine Ground cable looking greasy, old, corroded, or deteriorated? Did you know the Engine Ground Cable completes the current flow for most of the engine related electronics? Did you know a poor engine ground on your BMW can cause problems with fluctuating/inaccurate temperature gauge, occasional no crank from starter, dimming parking/headlights, among many other electrical related problems?

These Engine to Chassis ground cables are hand made by a professional Electrical Technician with over 10 years professional experience using professional tools and techniques. I'll explain and prove...see pictures below.

Each purchase is for a single 16 inch (hole to hole) cable assembly. It is slightly longer than OEM to make for easier installation.

This cable set will fit BMW's with the following engines:

E30: M42

E34: M20, M30, M50, M60

E28: M21

E32: M30, M60, M70

E31: M60, M62, M70, M73, S70

Here are the specs of the cable and components are used. Made in USA.

Cable Conductor - #2AWG 99.999% purified electrolytic copper

Cable Insulation - CCI Royal Excelene (resists oil, burning, abrasion, cold weather and is rated at 600 volts/3 hours, -58F to 221F)

Lugs - 3/8in dia through hole, copper

Heat shrink - Irradiated Polyolefin (flame retardant, -47F to 257F)

Additional specs - Highly flexible welding cable, which in my professional opinion, is the best power cable because its resistant to multiple climates, temperatures, oils, gas, and can withstand extreme amounts of current. Also highly conductive copper. These cables will last several decades!

Because this cable is almost twice as thick as the OEM cable, it will handle much more current for faster starter crank times and to supply power to your upgraded electronics.

Insulation is stripped, using professional techniques that avoids ANY possible nicks or scores. Wire that is stripped in a un-professional manner will have nicks and scores that will break over time and/or during the moment of crimping. This will lead to failure of the termination.

First crimped using Klein crimpers under high pressure. Each end is soldered using 60/40 tin/lead and a torch. Note the complete absorbing of solder.

Polyolefin heat-shrink tubing applied

Each termination is cleaned for maximum conductivity.

Completed Engine to Ground Cable 2AWG

Hennessey opens up the LS9-powered Camaro

Wed, 06 Oct 2010

Hennessey Performance is introducing a convertible version of its limited-edition 2011 HPE700 Camaro. The tuning company will produce just 24 copies of the 2011 HPE700 Camaro, but it hasn't revealed how many will be hardtops or convertibles. “We have already sold several of our 2011 HPE700s in hardtop form, increasing the potential for the convertible LS9 Camaro to become an even rarer option than before,” said John Hennessey, president of Hennessey Performance.

Formula E Electric Racers Move Closer To The Starting Grid

Mon, 19 May 2014

WITH the FIA Formula E Championship building up to the new competition’s first race in Beijing, China, on 13 September 2014, the first batch of electric Spark-Renault racing cars have now been delivered to the competing teams. The handover took place at the series’ new premises at the well-known Donington race track. Alain Prost, co-director of the French team E-Dams, and also an ambassador for Renault, was at the circuit for this landmark delivery.

TIV-2 takes the fight to the tornado

Fri, 05 Aug 2011

It takes a special breed of person to be a storm chaser. It takes an extra-special truck to withstand the 220-mph winds that tornadoes produce. The 14,000-pound TIV-2 is just such a vehicle.

2awg Bmw E28 E30 E31 E34 Engine To Chassis Upgrade Ground Cable. #2gnd16 on 2040-parts.com

Hennessey opens up the LS9-powered Camaro

Formula E Electric Racers Move Closer To The Starting Grid

TIV-2 takes the fight to the tornado