4 1/2" Stainless Steel Shrinking Disc English Wheel Planishing Hammer on 2040-parts.com
Lakewood, Ohio, US
The 4 1/2" diameter Shrinking Disc is for use on right angle grinders with 5/8"-11 spindles the most common size air and electric. Made from 16 gage .062 304 Stainless Steel, stamped for flatness and balance with a 90° turned up outer lip for added rigidity and saftey. they also work excellent on removing those "oil can" dents that you have Once you have started using the shrinking disc and get a little practice under your belt, it will !Stronger than others Guaranteed! If your not satisfied and/or you find the competitors better,
Shrink stretched or damaged metal panels by appling concentrated heating through surface contact friction generated between the disc and a clean body panel.
The panel area worked with the disc and rapidly cooled with water or commpresed air will shrink down the high points.
These shrinking discs work on steel or aluminum but we do not suggest swithcing from steel to aluminum without dressing the disc with 150 grit on a block so as not to imbed steel into an aluminum panel and causing corrosion issues down the road.
overworked and stretched the metal too much!
make you feel more confident in your metalworking skills when you can finish a panel with no
body filler at all.
Repeat the process as needed to work the panel flat and level.
The shrinking disc will smooth out damaged surfaces and try it on dressed out, butt welded seams. Learn to use virtually no fillers and the headaches that come with using too thick of filler repairs the thinner the filler the longer the repair will last panels can be worked so smooth the a high build filler primer is all that is needed to be ready for paint. Surface to be repaired must be dollied up level or slightly higher for this form of shrinking to work properly. Does not require a backing pad but some people preffer to use one Also offered in a 9" diameterthan others,
then send it back and I will give you a refund! No one else offers this!
Other Tools for Sale
4 1/2" & 9" shrinking disc combo english wheel planishing hammer(US $58.70)
Compact design automotive brake fluid tester w/ 4 led 180° testing rod buzzer(US $28.90)
2-in-1 infrared ir laser & k-type sensor thermometer thermocouple temperature(US $36.90)
Spindle nut (dorman #615-144)(US $22.25)
Bench mount head assem. tool, dune buggy vw baja bug(US $43.99)
Go rhino! xtreme garage and trailer organizer 2000r(US $83.87)
It's Viper vs. Viper at the Duel in the Desert
Thu, 06 Oct 2011Dodge Motorsports is starting its own celebrity race to rival the long-running Toyota Long Beach event. The Duel in the Desert inaugural Dodge Viper Celebrity Challenge will air on the Versus network on Oct. 9 at 3 p.m.
Subaru Impreza WRX STI A-Line released in Japan
Thu, 05 Mar 2009To bring its flagship performance sedan to the masses, Subaru has released the Impreza WRX STI A-Line in Japan. The A-Line swaps-in a traditional five-speed automatic transmission with Sportshift in place of the six-speed manual. Paddle shifters and a blipping control system that automatically raise engine revs during downshifts are standard.
Call over winter transport issues
Fri, 03 Jan 2014MORE MUST BE DONE to enable transport systems to cope with bad winter weather, a report by MPs said today. Recent floods and gales showed that disruption was not just caused by snow, the report by the House of Commons Transport Committee said. Transport's winter resilience had improved but there was a risk that a few years of mild winter weather "could lead to a false sense of security and reduce the sector's preparedness over the longer term", the report said.