Find or Sell any Parts for Your Vehicle in USA

427/540hp Chevy Bigblock Crate Engine New 2015 Last One Hi Bidder Wins on 2040-parts.com

Location:

Richmond, Virginia, United States

Richmond, Virginia, United States
Condition:New other (see details) Brand:gm Manufacturer Part Number:427



A. R. Racing - Performance
Engine Builders are
Proud to offer For Sale

!SALE PRICED  ONE ONLY HI BIDDER WINS  THE ONLY SALE PRICED 427 WE HAVE LEFT !NEW FOR 2015 YEAR PRO STREET SERIES BIGBLOCK ENGINES WITH GROUND POUNDING TORQUE AND EXTENDED RPM RANGE 427 CU IN STROKER .FEATURES THAT YOU DO NOT FIND ON OTHER BUILDUPS!@! FINALLY THEY HAVE ARRIVED THE ALUM HEAD  BIGLOCKS WITH FULLCASTING  PORTWORK RACE GRADE ALUM  HEADS AS WELL AS  FORGED I BEAM RODS AND PISTONS  .ALL NEW PRO  RECTANGLE PORT HEADS WITH HI FLO INTAKE PORTS THAT ARE NOT TO HUGE ALLOW  LOW RPM AIRFLOW  TO MAKE LOW RPM TORQUE YET PUNCH OUT GREAT HP #S OVER A EXTENED RPM RANGE.  OVER SIZE VALVES  HELP MAKE THE POWER FIGURES OUR HEADS AND MATCHING CAMS AND COMPRESSION RATIOS ARE TRULY  PROVEN POWER COMBOS DERIVED FROM DYNO TESTED COMBOS WITH ACTUAL REAL DERIVED POWER FIGURES.READ THESE OUTSTANDING FEATURES AND SEE WHY WE ARE THE BEST BUILDERS ON THE NET. FORGED PISTONS , ALL FORGED  RODS,STAINLESS VALVES 2.25 /1.90 FULL ROLLER ROCKERS   PUMP GAS HI TORQUE  FULLY BALANCED/STREET BLUEPRINTED/FILE FIT RING SETS NEW LITE FULL ROLLER STAINLESS ROCKERS FOR OUTSTANDING RELIABLE USE 2 TIMES STRONGER THAN A ALUM ROCKER AND IMPROVED CAM SELECTIONS ..MUCH MUCH  MORE WE HAVE 2 AND ONLY 2 TO SELL DONT MISS THIS ONE DONT ACCEPT ANYTHING LESS!! SOLD LESS CARB AND WATER PUMP..
  • 541 hp @ 5800 RPM  522 ft. lbs torque 4400 RPM  427 CU IN CU IN PERFECT SS CHEVELLE TRUCK OR CAMINO REPLACEMENT ENGINE
  • All new internals proffesionally
  • Prepared block
Machine work and parts that set our engines apart
valued at:  $7,895 - Retail cost SALE 6495.00 THRU  OCTOBER


Machine Work
  • Select Hi Tin block    machined 030  - 950.00 CU IN  
  • align bore and or check for run out.full race clearancing
  • Mag Check-preasure check ... $40
  • Hot Tank - Jet Wash .... $50
  • Bore Torque Plate Hone ... $125    Torque Plate Gives True Finish
  • Clearance block - -casting flash only n/c..   
  • Dynamic balance assembly.. $125
  • File fit rings - blue print clearance... $90
  • Float - pistons to rods... 
  • Install cam bearings - freeze plugs... $45
  • Port blue print cylinder heads..150.00
  • Final assemble full rotating and top end
    • Parts including final torque - clearance - and geometry of all parts... $200 total labor you could spend 1600.00
All new Performance Internal Parts
  • USA MADE JE/SRP  FORGED PROBE TRW  pistons 10.7 to 1 piston set[ 689.00 PUMP GAS OK   
  • FORGED steel stroker crank all new 3.76 stroker .. torque at low rpm where you need it INTERNAL BALANCE
  • Childs & Albert -  zz gapdura Moly File Fit Rings... $159.99 [provides the ultimate in ring sealing making more power!!
  • Durabond - cam bearings... 49.99
  • 4340  forged steel   rods  
  • ARP - wavelock - rod bolts...   $59.99
  • Clevite- -bearings  tri metal 77 - rod and main...  $99.99
  • comp cams custom  hi output cam lifter set  ..  199.00
  • Cloyes -  true roller set... $59.99
  • Comp - cams cam locks...  $4.99
  • comp cams  xe chrome moly  pushrods 99.99
  • Dyna gear  race - oil pump...  $49.99
  • Dyna gear  - pickup...  $29.99
  • ARP - steel drive...  $13.99
  • After market - oil pan.  baffeld 7 qt   $99.99
  • After market - timing cover...  $19.99
  • pioneer/arp - head bolts...  $59.99
  • ARP/ - rocker studs 7/16...  39.99
  • Fel Pro  blue - gasket sets...  89.99 - TOTAL PARTS YOU COULD SPEND BUILDING YOURSELF  4400.00 INC HEADS COST BELOW
Power Making Featured Parts
  • ALL NEW PRO RECTANGLE PORT ALUMINUM LARGE  OVERSIZE VALVES AND STAGE 1 PORTS  REGARDED AS THE BEST POWER FOR STREET/STRIP  LOOK AT THESE ADDED FEATURES.  Bowls blended,  ...  $1758  315 RUNNER VOLUME
    • Features -  - -severe duty STAINLESS 2.25/1.90 valves plus ...  1.50  springs 10  degree super locks comp cam parts..good  porting..7/16studs guide plates.gasket match p.c seals.chrome moly retainers.. YOU NEED THIS SIZE VALVE TO MAKE THE POWER ALONG WITH THE CAM!!
  •  hi perfromance RELIABLE STAINLESS ROLLER    rockers-1.7 ratio...  $249.99
  •  custom series- -muscle car cam RADICAL IDLE YET FAST THROTTLE RESPONSE HOW MANY ENGINES HAVE THAT !!.MAJOR LOW RPM TORQUE WITH EXTENDED RPM RANGE[1800 THRU 5600] MATCHING POLISHED HI RISE INTAKE OR WEIAND 
  • Features - 110 center line 625 - 631 lift corrected 1.7 ratio = .  255/258 dur @ 050 awesome power  range   2900 stall.   lopey muscle car idle. 100% streetable and will run vacum access  
    • Total parts and labor value = $7895 average retail cost
      • You could spend more by building on your own!
    • primary use hi performance pump gas street
  • Characteristics - built with corret balance of power and easy maintenance,we carry the matching carb and show polished dist e-mail for fit and tech DONT SPEND THE 8,000 PRICE TAG YOU SEE ADVERTISED ELSEWHERE.  THIS ENGINE IS SOLD LESS CARB AND DIST.avg ship cost 190.00 and above and  paypal and credit cards . paypal disclaimer[our products] are sold for hi-performance use and are sold as is .e-mail or call 540-439-1961 for tech or info                                  

all rights reserved
copyright 2013




.























1

Complete Engines for Sale

McLaren P1

Thu, 14 Feb 2013

McLaren has revealed the first interior images of the production-ready P1 ahead of its debut in Geneva next month. The interior was hidden with heavily tinted windows in Paris, but these pictures show a sparse cabin with a considerable amount of carbon fiber on display. The woven wonder stuff is used for the dashboard, floor, pillars, doors and rockers while a single piece is shaped for the center stack.

2005 Interior Motives Design award winners announced

Fri, 23 Sep 2005

 The Interior Motives Design Awards were held on the second press day of the IAA in Frankfurt. Now in its third year, the awards ceremony is a regular fixture, inked into schedules as a chance to meet and make acquaintances. Each year, Interior Motives proposes a range of design briefs to leading universities, giving their young talent the opportunity to have their work viewed by leading designers and win up to $5000.

Automakers trail in the great gizmo race

Mon, 06 Jun 2011

A customer at Rockland Toyota in suburban New York recently asked why he couldn't recharge his cell phone through the USB port built into the otherwise sophisticated Toyota Venza crossover. Evan Kuperman, the dealership's assistant general manager, took a deep breath. He shrugged his shoulders and smiled.