50 Vintage Countersunk Solid Copper Brake Clutch Rivets 5/8 Tall X 11/64 Shank on 2040-parts.com
Granville, Illinois, United States
Offering 50 new old stock vintage countersunk solid copper brake/clutch rivets. Made by Champion Brass Works, Chicago. Original box well worn, rivets fine. Box was marked #8 and 5/8. From old time Chicagoland auto parts store that closed in late 1940s. SPECIFICATIONS (measurements approximate): shank diameter 11/64 (0.1685) 4.28mm head diameter 5/16 (.2945) 7.48mm body length 17/32 (.4930) 12.52mm total length 5/8 (.6205) 15.75mm NOTE: Check actual size of rivets to make sure they will work for you. These are new old stock and many did not have modern size numbers on the boxes. Rivets were measured and numbered as close as possible to the modern rivet numbering system. Some had in between head sizes, which are noted in the listings.
Before purchasing, it is your
responsibility to make sure this item will work for your application. If you
are not sure, call your local dealership to verify this is the correct part for
your vehicle. Or email us; we can attempt to verify the application. We use
many different references to try to determine part applications. Use our
applications as a guideline only and do your own research to be sure you are
purchasing the proper part for your vehicle. Many different variables go into
vehicle applications (engine size, transmission, model, brake system, wheel
drive, etc.). We are unable to list every application for every part we sell.
We do offer a 14 day return policy. We
reserve the right to apply this policy at our discretion. If you destroy the
packaging or send the part back in a non resalable condition, we will not
accept it. If you ordered in error, we are reasonable and will work with you.
We will accept returns within the 14 days and, as long as the part shows no
sign of being installed, issue a refund less shipping and any fees we may have
occurred. The item has to be returned in the same condition and with the same
package as was sent to you. If it shows sign of installation, the package has
been damaged, or there is any other cause for the item to not be considered
new, we will either refuse to issue a refund or issue a partial refund. If shipping seems a little high to you it
is because we do many things to try to have your purchase reach you safely. We
will do one or multiples of the following: place item in a plastic bag,
sandwich bag between 2 pieces of cardboard, bubble wrap, cushioning material,
use a bubble envelope or a box that is larger than necessary to try to protect
item during shipping.
INTERNATIONAL BUYERS PLEASE NOTE: Import duties, taxes and charges are not
included in the item price or shipping charges. These charges are the buyer’s
responsibility. Please check with your country’s customs office to determine
what these additional costs will be prior to bidding/buying. These charges are
normally collected by the delivering freight (shipping) company or when you
pick the item up – do not confuse them for additional shipping charges. We DO
NOT mark merchandise values below value or mark items as “gifts” – US and
International government regulations prohibit such behavior.
We combine shipping on multiple item purchases. The shipping
calculator is not always accurate and doesn’t list all shipping options. We
charge actual shipping and packaging material costs and a small fee for
handling. EBay charges a final value fee on shipping so please
wait for an invoice with the correct combined shipping cost on multiple item
purchases before paying. An invoice will be sent usually within 24 hours. If you are
concerned about shipping costs, please ask before purchasing. If you email us
your zip code, we will gladly work up a shipping estimate for you. Pick up is
always welcome.
Many of the items we sell are vintage or
no longer in production. All items are sold as stated and there is no implied
warranty. By purchasing an item, you agree to take full responsibility and liability
for the use, installation, maintenance, and operation of the item as well as
any and all consequences which come out of its purchase, use and/or misuse.
Inv #6138HG8ZBMLRA3 |
Brakes for Sale
- 37 vintage countersunk solid copper brake clutch rivets 3/4 long x 11/64 shank(US $18.95)
- 50 vintage countersunk solid copper brake clutch rivets 5/8 tall x 13/64 shank(US $18.95)
- 4-7 vintage cupped brass tubular brake clutch rivets qty 76(US $15.45)
- 50 vintage countersunk solid copper brake clutch rivets 5/8 long x 3/16 shank(US $18.95)
- 50 vintage countersunk solid copper brake clutch rivets 1/2 long x 11/64 shank(US $18.95)
- 50 vintage countersunk solid copper brake clutch rivets 1/2 long x 5/32 shank(US $21.95)
Latest news on Fiat's plan to gobble up GM-Europe
Fri, 15 May 2009By Tim Pollard Motor Industry 15 May 2009 10:18 With just over a fortnight until General Motors’ fate is sealed, moves to rescue GM’s European car making division are accelerating. Fiat – already named as the Obama-blessed partner for bankrupt Chrysler in the US – is now wooing Opel, Vauxhall and Saab in Europe. If successful, Fiat would overnight become the second biggest car making business in the world.
Volvo reveals C30 BEV electric car
Thu, 17 Sep 2009By Tom Sharpe First Official Pictures 17 September 2009 11:44 Battery power is back on the menu at Volvo with this, a C30 plug-in hybrid. The electric Volvo C30 BEV wasn’t at Frankfurt, and the Swedes announced the zero-emissions runaround today – along with details of a 92-mile range, 80mph top speed and 0-62mph sprint of less than 11 seconds. The BEV stands for Battery Electric Vehicle and Volvo’s new plug-in hybrid could be introduced to the C30 range by 2012, bosses say.
Audi planning a version of the VW Up!
Wed, 23 Oct 2013Audi planning their own version of the VW Up! (pictured) The German premium car makers – Audi, BMW and Mercedes – are in a battle to see who can sell the most ‘Premium’ cars. And Audi has big plans to stay in the race.