Find or Sell any Parts for Your Vehicle in USA

96 01 Acura Integra 1.8l Dohc Non V-tec Gs Ls Rs Obd2 Engine Mt S4c Jdm B18b on 2040-parts.com

US $1,448.00
Location:

Irving, Texas, United States

Irving, Texas, United States
Used, normal wear and tear, not New, view pictures for more detail or contact us please.
Brand:Honda Acura Warranty:Yes Manufacturer Part Number:Acura Integra 1.8L DOHC B18B LS RS GS Country/Region of Manufacture:Japan Interchange Part Number:B20B B16A DC2 B18C D15B D16A ZC Country of Manufacture:Japan Other Part Number:Acura Integra JDM B18B LS Engine Transmission Part Brand:Honda Acura B18B LS Placement on Vehicle:Front

 photo af54a645-59a6-4077-9a65-61592479a861.png

 photo bb568978-07f0-47be-a4f1-4e82144df6ab.jpg

For Shipping Quote To Lower 48 States And AK, HI, PR Or Out Of Country Please Contact Us Toll Free : 1-888-986-2880 / Above Mentioned Emails ***

ALN JDM Auto Motors is one the largest JDM Low Mileage Engines & Transmissions Importer!!!
 
We have a large inventory of JDM SOHC, DOHC, VTEC, NON VTEC, i-VTEC, SUPERCHARGED, TURBO CHARGED, KLZE, ROTORY, ETC. in Stock at the competitive low prices! 

THIS AUCTION IS FOR A USED 96-01 HONDA ACURA GS LS RS 1.8L DOHC OBD2 ENGINE AND MANUAL 5 SPEED TRANSMISSION S4C 
JDM LS / B18B

PLEASE NOTE:
WE HAVE A LARGE QUANTITY OF LOW MILEAGE JDM ACURA/ HONDA,  NISSAN / INFINITI, TOYOTA / LEXUS, MAZDA, MITSUBISHI ENGINES AND TRANSMISSIONS IN STOCK AT VERY LOW COMPETITIVE PRICES AVAILABLE

        MILEAGE IS BETWEEN 49-65K  

 THIS ENGINE WE HAVE IN STOCK WAS REMOVED FROM A RUNNING ACURA INTEGRA IN JAPAN AND IMPORTED TO US DIRECTLY!!!
     
IT COMES WITH 30 DAYS START UP WARRANTY 
          
&             
100% CUSTOMER SATISFACTION GUARANTEED !!!

PLEASE CHECK THE CODE ON  YOUR STOCK ENGINE FOR PROPER FITMENT BEFORE BIDDING ON THIS  ITEM, ALSO BE ADVISED THAT THESE ARE JDM IMPORTED ENGINES AND DOES NOT HAVE CRANK SENSOR. "YOU NEED TO PUT A USDM OR US MODEL OIL PUMP WHICH HAS THE CRANK SENSOR WITH IT FOR PROPER USE / FITMENT". IF YOU ARE USING THIS ENGINE IN ANY OTHER VEHICLE THAN ACURA INTEGRA PLEASE DO YOUR RESEARCH...

" PLEASE DO YOUR RESEARCH PRIOR TO PURCHASING, WE WILL NOT BE RESPONSIBLE IF IT IS NOT COMPATIBLE OR DOES NOT FIT IN YOUR VEHICLE / CAR "

METHOD OF PAYMENTS
PAY PAL
***ALL  MAJOR CREDIT CARDS ACCEPTED***
AMEX
DISCOVER
DINNERS CLUB
MASTER CARD
VISA
WE ALSO WELCOME AND ACCEPT, 
BANK WIRE TRANSFER / TT    
CASHIER / CERTIFIED CHECK  
COD FOR LOCAL DELIVERIES
CASH ON PICK UP

THANK YOU!

***SAMPLE PICTURES  SHOWN***  

" YOU WILL RECEIVE A SIMILAR ENGINE AND TRANSMISSION AS SHOWN "

WARRANTY INFO:
           
ALN JDM Auto Motors offers 30 days start up warranty on any non performance engines, transmissions and brand new Ignition Distributors.
   
 Any Performance engines such as Vtec/ i-Vtec, Turbocharged, Supercharged, Mazda Klze (Excluding Rotory & Diesel Engines)comes with 14 days start up warranty.

   
  
All Mazda Rotory such as 13B Turbo II,13B Twin Turbo, 20B 3 Rotors, 13B-RE are (SOLD AS IS). We make sure they are not Ceased up or Locked before selling it.

   
All Accessories and other body parts such as Steering Wheels, Clusters, Floor Mats, Seats, Rims, Ecu, Maf Air Flow Sensors, Nose cuts Etc. are also (SOLD AS IS)

 
Warranty does not cover  any External Parts or Accessories on the Engines and Transmissions such as Distributor, Distributors' cap / cover, Intake Manifold, Exhaust Manifold, Oil Pan, Solenoids, Wiring Harness, Plugs, Sensors, Belts, Etc. Which in most cases needs to be changed / swapped over from your stock Engine or Transmission any way.
 "Also in most cases you have to use these JDM engines as Long Block Only because they are out of Right Hand Drive Cars in Japan".
   
  
ALN JDM Auto Motors, Will not be responsible for any improper installation on our products, it must be installed by ASE 
Certified Mechanic.

Any costs associated with repairs or replacements, including labors, installations or any other related costs, shipping charges would not be covered under warranty. We ask our respected customers to contact us with any problems or concerns about our products within   

14 days from the date of purchase on the original invoice.

If the Product has been altered in any way, improperly installed, or not used for its' intended purpose,warranty will be voided.

In the unlikely situation of our products being defective / bad you need to contact us first with a letter / document from your Certified Mechanic as a proof that way we give you a RMA number(Return Merchandise Authorization) then you could ship it back to us,
other wise the shipment is going to be refused here at our establishment at customers' own expense. 

Exchange is only offered if our product is bad, again we would require a written document from your ASE Certified Mechanic proofing it. For any other reason if a customer refuse or return our products there will be a 25% restocking fees plus both ways shipping.

Shipping & Handling

ALN JDM Auto Motors offers its' Customers with the Lowest Shipping Charges possible both Domestic & International!!!
We use several different Freight Companies to get the best and lowest price on shipping.

Dear Customers,
In order to provide you with an accurate shipping rate please contact us with your complete address where it is shipping to by
calling at: 972-986-2886 / 469-500-0301
or
Email us at:
info jdmautomotors com
alnjdmautomotors gmail com
  
Domestic & Canadian shipments Estimated Time of Delivery is between 2-10 business days by Freights.

International shipments are by Ocean Freight to the nearest Ocean Port of Discharge and Estimated Time of Delivery is between
4-8 weeks.

Attention Customers:
We at ALN JDM Auto Motors do our best to ship your orders by packaging and putting it on the skids on big shipment as safe as possible free of any damage leaving our warehouse, but since we don't do the shipping and handling part ourselves there fore we ask our Respected Customers to please check everything when receiving it by freight company and make sure there is no sign of damage, if you see anything please make a note of it on the Bill Of Lading before signing to receive it from Freight Company's drivers.
That way it makes it easier to do a claim with Freight Company for any damages.
 
Thank you!
 
  We appreciate your business!!!

Nissan Bevel concept

Mon, 08 Jan 2007

By Phil McNamara Motor Shows 08 January 2007 11:59 Nissan Bevel: the lowdown This is the Bevel, a concept car that makes a Swiss Army knife look one-dimensional. This versatile vehicle is more suitable for tradesmen than a van, has the interior flexibility of an MPV and looks that blend SUV- and people carrier-cues. Nissan's designers claim to have spotted a contemporary demographic – a group of 45-60-year-old males, who allegedly go bob-a-jobbing around the neighbourhoods helping others – and created a futuristic-looking van for these 'everyday heroes'.

Will Volvo need a JV in China with itself?

Tue, 29 May 2012

Western car makers wanting to operate in China need a joint venture with a Chinese partner. And it looks like Volvo is going to have to partner with itself to keep officials happy. The Chinese authorities are keen to make sure that Western car makers can’t just rock up on their doorstep, open up a factory or three and flog cars in the most populous nation on earth.

Report: Interior Motives China Conference 2009 – Day 2

Tue, 28 Apr 2009

After a boat trip down the Huangpo River in the evening of the first day to give delegates and speakers a chance to mix more informally, it was soon time to get back on with the second day of the conference. This saw a speaker and panel line-up including experts from Lotus, Bertone, Geely, the Royal College of Art, Tsinghua University and Art Center Pasadena, covering sessions as diverse as environmental design, better car design education and brand identity. Session 5 - Eco design future This environmentally focused session was kicked off by a thoughtful speech from Nathan Mullinix, VP research and development for leather supplier and conference sponsor Eagle Ottawa.