Returns Accepted:Returns Accepted Item must be returned within:30 Days Refund will be given as:Money Back Return shipping will be paid by:Buyer Return policy details:GENERAL RETURN POLICY: Returns only accepted within 30 days of purchase. No exceptions. Part is guaranteed fully functional or your money back. This does not include improper installation or incorrect interchange. Refund will be granted upon receipt of the defective part. NON DEFECTIVE RETURN POLICY: NON DEFECTIVE RETURNS MUST BE MADE WITHIN 30 DAYS OF PURCHASE, AND ARE SUBJECT TO 25% RESTOCKING FEE. RETURNS MADE ON NON-DEFECTIVE PARTS ARE NOT ELIGIBLE FOR A REFUND ON FREIGHT. ENGINE RETURN POLICY: Engines are guaranteed for thirty (30) days after date of receipt, and only when used under normal driving conditions. Used engines are warranted as long blocked (against cracked blocks, heads, flat cranks, and all internally lubricated components). Any abuse or lack of maintainence or overheating will void the warranty. A heat tab will be placed on all engines. Removal of the heat indicator tab voids the warranty. TRANSMISSION RETURN POLICY: Transmissions are warrented to work properly and guaranteed for 30 days. All warranties are contingent on the parts being properly installed to the manufacturer's recommendations. Any improper installation will void the warranty. Warranty is voided if the cooling lines and radiator are not flushed prior to installation. Not installing new filter will void any warranty. We do not warranty external sensors, solenoids, linkages, or leaking seals. AIR CONDITIONING COMPRESSOR RETURN POLICY: OUR STANDARD PARTS WARRANTY IS THIRTY DAYS. FOR THIS WARRANTY TO BE VALID ON AIR CONDITIONING COMPRESSORS, THE RECEIVER-DRYER MUST BE REPLACED AT THE TIME THE COMPRESSOR IS INSTALLED. THE RECEIVER-DRYER IS ALSO A FILTER, AND PREVENTS ANY DEBRIS OR CONTAMINATION THAT MAY BE PRESENT IN THE SYSTEM FROM DAMAGING THE NEW COMPRESSOR. PROOF OF PURCHASE AND/OR INSTALLATION OF A NEW RECEIVER-DRYER IS REQUIRED FOR ANY AIR CONDITIONING COMPRESSOR WARRANTY CLAIMS. Restocking Fee:No Manufacturer Part Number:n/a Interchange Part Number:435-58746A Other Part Number:Sn 7916 Placement on Vehicle:Rear Warranty:Yes Part Brand:Ford

PLEASE CONTACT US AT

TOLL FREE: 888-862-4223

IF YOU HAVE ANY QUESTIONS

This auction is for the following item:

This is a used Rear Axle

From a 1999 Nissan Pathfinder

Non-Locking, 4.636 Ratio, VIN 7 (7th digit)

Produced AFTER 12/98,

The donor vehicle had 60k miles on it.

It is in good used condition.

the only damage I could find is a groove

on the bottom of the carrier that looks

like it took an impact (pic 7). Looks pretty minor,

I don't know what's supposed to ride on that

groove, but it could probably be repaired easily enough.

I guarantee it to be functional

Hollander number: 435-58746A

It will fit:

Interchange Applications for 435-58746A Axle Assembly, Rr




 
1)
Nissan Pathfinder
1999
 
from 12/98, VIN 7 (7th digit), non-locking (4.636 ratio)
[58746A]

 
2)
Nissan Pathfinder
2000
 
non-locking (4.636 ratio)
[58746A]

DA carrier $919
DA axle, R or L $199
DA case $494
Non-locking.





Non-Exact Interchange Notes for 435-58746
|B| fits |A|; difference locking differential.
4.636 ratio.
Ring gear & pinion must be counted manually to determine gear ratio.
4.375 gear ratio does not exist on 1996 & newer Pathfinders.
VIN driven part systems may list this as a 4.375 ratio, but that ratio does not exist.


Below items are non-exact interchange applications

NOTES for 58746B

 
3)
Nissan Pathfinder
1999
 
from 12/98, VIN 7 (7th digit), locking (4.636 ratio)
[58746B]

 
4)
Nissan Pathfinder
2000
 
locking (4.636 ratio)
[58746B]

DA carrier $1597
DA axle, R or L $199
DA case $494
Locking.

NOTE:

IN 4X4 VEHICLES, AXLE RATIOS MUST MATCH

OR SERIOUS DRIVETRAIN DAMAGE WILL OCCUR

It is the buyer's responsibility to determine

if this part will fit his/her vehicle

NON DEFECTIVE RETURN POLICY:

NON DEFECTIVE RETURNS MUST BE MADE WITHIN 30 DAYS OF PURCHASE, AND ARE
SUBJECT TO 25% RESTOCKING FEE. RETURNS MADE ON NON-DEFECTIVE PARTS ARE
NOT ELIGIBLE FOR A REFUND ON FREIGHT OR SHIPPING.

Questions? Not what you're looking for?

Please contact us if you need something else.

_____________________________________________________

NOTE: SHIPPING ON THIS ITEM IS NOT FREE

PLEASE CONTACT US FOR A FREIGHT QUOTE

BEFORE BUYING!!!

NOTE: We also have courier service to businesses in Phoenix.

Contact us for a shipping quote!

International Customers:

International shipping

NOT available at this time

_____________________________________________________

All sales with in Arizona will be charged sales tax.

We accept Visa / MasterCard.

We are a company that takes your business seriously.
We will answer your emails and calls as
soon as possible during our regular business hours.
We will leave good feedback for you upon
completion of successful Ebay transactions only.

We recycle wrecked Pickup Trucks, 4x4's, and SUV's.
From Engines and transmissions to wiring harnesses and door parts.
Steering and suspension parts to lighting assemblies and dash components.
Emission controls and body parts to bumpers and seats.
We stock parts that other yards throw away.

Our address is:

Ace Pickup Parts
9110 S. Eisenhower rd.
Tucson Az, 85756

Call us toll-free at:
(888).862.4ACE (4223)
or
(520).889.9000
Or fax us at:
(520).889.5000

And Remember Our
Hours of Operation:
8:00 AM till 5:00 PM
Monday through Friday
Closed Weekends

Flying Baldini Brothers take grand prize in Autoweek America Adventure

Thu, 03 Nov 2011

After five days of food, fun and friendly competition, the big prize in the Autoweek America Adventure was in the Mopar booth at the Specialty Equipment Market Association show in Las Vegas: a limited-edition 2011 Mopar Dodge Charger. The daily winners on the adventure collected a key fob, and one of them would start the Charger. Team Roe Racing was the overall high-point winner for the challenge.

Mercedes to build CLS Shooting Brake

Tue, 09 Nov 2010

Mercedes has announced that the CLS Shooting Brake, which was shown as a concept at the Beijing motor show in April 2010, will go into production in 2012. Well, if you want a car that will turn heads around town – and find the E-class estate has a little too much room – then this is the car for you. Mercedes flatly refuses to admit that the CLS Shooting Brake is an estate, preferring to call it a ‘sporty four-door coupe with a sloping tail end based on the CLS’. In essence, this car is a hatchback version of the CLS, and despite a slightly raised roof, it still sits a full 10cm lower than its E-class sibling.

Audi A1 Sportback concept: first photos

Wed, 01 Oct 2008

By Tim Pollard First Official Pictures 01 October 2008 21:35 Audi has whisked the covers off its five-door A1 – in the shape of this A1 Sportback concept car, shown to a few selected media and VIPs on the eve of the Paris motor show 2008. It's a follow-up to 2007's A1 Metroproject quattro concept, which previewed the three-door A1. Audi's new supermini is scheduled to arrive in showrooms in 2010; you can read CAR's full scoop on how the production A1 will look here.We'll have the full story on the new Audi A1 concept in the coming hours, but we can confirm the car's dimensions: at 3990mm long and 1750mm wide, it's actually a size up on BMW's Mini (3699mm/1683mm in One hatchback form).

99 00 Nissan Pathfinder Oem 4.636 Ratio Non-locking Rear End Axle Differential on 2040-parts.com