Find or Sell any Parts for Your Vehicle in USA

Aircraft Dustless Sander System Composites, Lead Cadmium, Strontium, Zinc & Bari on 2040-parts.com

US $3,650.00
Location:

Novi, Michigan, United States

Novi, Michigan, United States
Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ... Brand:Tiger-Vac Product Weight:190 MPN:SS-10 (4W) SK HEPA Model Number:SS-10 (4W) SK HEPA Manufacturer:Tiger-Vac Model:Dustless Sander UPC:Does not apply

Aircraft Dustless Sander System Composites, Lead Cadmium, Strontium, Zinc & Barium

You are bidding on a Tiger-Vac SS-10 (4W) SK HEPA, Point of generation dust control for the recovery of lead cadmium, strontium, zinc and barium.

Tiger-Vac Standard Industrial Vacuum / Sanding Kits are ideal for body shops, transportation and vehicle maintenance, etc. These units are designed to be grounded during use to prevent operator discomfort from static electrical shocks and for added safety. Dual intake suction assembly, allows 2 sanders/ grinders to be used simultaneously on one vacuum.

SS-10 (4W) SK HEPA Dustless Sanding Kit

Certifications GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids. II 2 G/D c IIC T6 (85oC) LCIE 03 ATEX 6310   Vacuum Cleaner certified for providing an Equipment Protection Level of EPL Db and EPL Gb   All stainless steel SAE 304 construction.  Less than 10 Ohms of static resistivity.  This unit is equipped with a true HEPA Filter (H14) located downstream

http://www.tiger-FACTORY LINK TO 110264

http://www.tiger-vac.com/index.php/product-line/accessories/dustless-hand-tools-a-accessories-for-use-with-vacuumsanding-kits.html ACCESSORIES LINK

·       Legally certified explosion proof/dust ignition proof

·       Less than 10 Ohms of resistivity

·       HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our facility.

·       Designed for point of generation dust control

·       Up to 2 operators working simultaneously

·       Pneumatically (air) operated

·       For dry recovery only

·       All stainless steel SAE 304 construction

·       Mounted on an SD* 4-wheel dolly for easy maneuverability. Dolly has SD* conductive wheels

·       Complete system includes all sanders, hoses, abrasives start-up kit and filters to ensure turn-key operation

·       Abrasives are available in PSA (sticky), hook and loop (Velcro®) or screen type

·       Many different grits are available

We don’t have capability to test this device to manufacturer’s specification; by purchasing the item the buyer is taking full responsibility of making sure the device meets its performance specifications before use (Please see under "Policy" below for full medical device disclaimer). E-mail us with any additional questions. Thank you.

Payment:

We accept most forms of payment including: Credit Cards, Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery.

You can pay with credit card over the phone (248-752-5084).

Return Policy:

Within 14 days after receiving this item and if you believe that we mis- represented it, please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You

SHIPPING:

This item has a combined shipping weight of about 190 (42x48x60) pounds and will ship Common Carrier. Check with us for shipping options and rates. We combine shipping on multiple orders.

There is no charge for pick up at our Northwest Detroit Suburb location.

You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. specequip at spectorequipment.com 248-522-7930

 

Ebay Medical Disclaimer: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller: Spector Equipment (specequip), is a re-seller of medical and other surplus inventory. We are located in Novi, Michigan. Our phone contact is 248-522-7930

Spector Equipment POLICY: We DO NOT test or certify the equipment being sold. It is up to the purchaser to meet all requirements and regulation certification processes that deemed necessary per FDA or any other regulatory agencies that may be applicable. If you purchase medical, laboratory or any equipment that will be for PATIENT use, it is the BUYERS responsibility to have the equipment certified, tested or inspected prior to patient use. No exceptions. By purchasing an item you agree to the following: We (Seller) do not state or imply the usage of the item being sold. Prior to using the item individually or on a patient, you (Buyer) will seek if applicable the manufacture or your personal/medical care/health care provider for full details on proper usage of the item, instruction for fitting and wearing of an item if applicable, maintenance/operations, care of item or any regulatory requirements for the item. You (Buyer) of the item agree to use this product at his own risk and agree to hold harmless seller, and release owners, operators and manufactures from any damage /liability he may incur due to the use of the item.

WARRANTY: The item is being offered as-is, guaranteed to be equivalent to that pictured and as described under: “INCLUDED IN SALE” and “ITEM CONDITION” in above description at delivery to customer (if shipped) or at pick up at our location (if hand carried out). No additional time warranty, usage period warranty, or any other guarantees are being offered, expressed or implied. If item is not equivalent to that described / pictured in the listing at delivery or pick-up, customer is entitled to full refund of the purchase price minus any applicable shipping charges. If shipped back the item must be securely repackaged and back within 14 days from delivery in order to receive the refund. The item description and specification are obtained best to our knowledge from available manufacturer and other public information and are provided for reference only. Bidders are responsible for researching the item meets his/her expectations prior to bidding. Asking questions prior to bidding is highly encouraged. Customer satisfaction is our number one priority. Please contact us if there is an issue w/ the item you have received, we will do our best to correct any problems that may arise.

Ebay Policy: “Your bid is a contract – Please bid only if you're serious about buying the item. If you are the winning bidder, you will enter into a legally binding contract to purchase the item from the seller. You should contact the seller to resolve any questions before bidding”

 

Nissan designs A Class catamaran

Fri, 12 Aug 2011

Nissan has today announced that it has designed and built a catamaran as the latest part of its non-automotive design and development program. Matt Struble, who led the design and modeling team at Nissan Design America (NDA) in San Diego, will be racing the Class A Catamaran in the 2011 World Championship from August 13 through 20 in Skødstrup, Denmark. The team sought to improve and smooth all aspects of aero- and hydro-dynamics of the vessel, with the boat's composite structure designed and built in-house.

Price Announced For Super-Frugal Hybrid S-Class

Tue, 09 Sep 2014

MERCEDES-BENZ has revealed prices for its high-tech S-Class plug-in hybrid model. The car, which boasts 100.9mpg and a 65g/km CO2 rating, will cost from £87,965 when it hits the showrooms later this month. The car is aimed at buyers seeking to combine limousine space with city car running costs.

Honda cuts UK production by 50 per cent

Wed, 06 Apr 2011

Honda (UK) cuts production Japan is slowly recovering from the earthquake and tsunami that hit on 11th March. Or at least its production is. Honda has revealed that it expects its Japanese plants to resume production of 11th April – just one month after the disaster – but initially that will be at just 50% capacity due to a shaky parts supply line.