Atlas Two Post 10,000 Lb. Capacity Overhead Style Auto Car Truck Lift Hoist New on 2040-parts.com

Welcome to EBAY shopping for automotive equipment. Everyone that visits EBAY is looking for the best deal. Greg Smith Equipment is the BEST DEAL. We have been in business since 1982. Why would you consider buying a piece of automotive equipment at ANY price if you cannot get parts or service for the product in the future?

Most Internet automotive distributors are not a “brick and mortar facility”. Most of these Internet companies have NO physical address-just a toll free number and PO Box.

Greg Smith Equipment has five locations (with a combined total over 100,000 square feet) that stock the equipment we have advertised on EBAY and on our web site. We employ over 30 people to help you make an intelligent buying decision and to make sure you order is shipped promptly and service or installation questions are answered.

If price is your only consideration, Greg Smith Equipment has access to ALL the NO-NAME products advertised on the WEB. We are the LARGEST distributor of above ground lifts, tire changers, and wheel balancers in the USA and ALL the foreign manufacturers want our business; just like we want YOUR business.

Call us to find out the facts about automotive service equipment. Greg Smith Equipment has the most qualified sales and service professionals in the Industry. Lowest prices and best service make Greg Smith Equipment your “BEST DEAL”.

Atlas PV-10P 10,000 LB.
Overhead 2 Post Lift

This auction is for one Atlas PV-10P Overhead 2 Post Lift.

Product Code: ATPK-PV10P



If you would like to receive a shipping quote, please call
our location nearest you.




Description:
The commercial grade Atlas PV-10P two post lift includes some modifications
and improvements that make it one of the most popular above ground lifts in
the world.

The Atlas PV-10P is the perfect choice for use in either a large commercial
service department or for the "pole barn" owner who wants the "biggest and
baddest" lift in the county. The Atlas PV-10P is designed and engineered to
safely lift (and work on) everything from a Smart Car ® to a one ton diesel
dually.

The Atlas PV-10P (the "P" means "padded") incorporates a "padded" shut-off
bar to protect the top of the vehicle from contacting the crossbar. The carriages
are equipped with "padded" protective (thick rubber) covers to help prevent the
vehicle's doors from damage if opened into the columns or carriages.

The truck adapter set has been augmented (12 pieces vs. 8 pieces) and the
rubber lift pad has been reinforced to ensure a solid contact with the vehicle's
lifting point.

How Do I Get My Stuff Off The Truck?:
Many customers do not have access to loading docks and forklifts. Many of our freight carriers have power tailgates on their delivery trucks. There may be an extra charge for the power tailgate, depending on the carrier. The power tailgate is normally rated at 1000 LB. capacity. This is not enough capacity to unload most of our lifts. However, when used properly (and safely), the power tailgate (in conjunction with some common sense) allows the customer to off load many of our products without the use of a forklift.

Most truck shipments will be delivered by a commercial freight carrier operating a tractor/trailer rig. The semi trailer will be enclosed. Most commercial carriers have smaller straight trucks and some have small flatbed trucks, but the majority of freight companies will not use these smaller trucks for your delivery. Greg Smith Equipment cannot guarantee the type of truck that will be used for delivery. You should assume that your product will be delivered on a tractor/trailer rig that uses a 53 foot enclosed trailer. This is a VERY LONG rig. It is the truck driver's responsibility to make sure that your product is brought to the back of the delivery truck. It is the customer's responsibility to unload the product from the truck.

Hydraulic Cylinder Configurations:
Greg Smith Equipment uses a newly designed cylinder configuration for the Atlas PV-10P lift.

There are two popular hydraulic cylinder configurations used in two post electric/hydraulic above ground lifts:

Greg Smith Equipment sells above ground lifts that incorporate both the direct drive cylinder configuration and the chain-over-roller cylinder configuration.

The base plate two post above ground lift implements the chain-over-roller configuration. This is the only hydraulic cylinder system that is possible in the base plate lift. The base plate two post above ground is designed for "low ceilings". The direct drive hydraulic cylinder configuration cannot be used in the base plate lift because the hydraulic cylinder would extend above the 9' 3" column when the lift arms were raised to the maximum height.

The "overhead" two post above ground lift may incorporate either the direct drive hydraulic cylinder or the chain-over-roller hydraulic cylinder.

Versatility:
The PV-10P two post car lift is designed to offer that extra amount of lifting capacity to safely lift dual wheel pick up trucks or fully loaded ¾ ton or ½ ton pick up trucks. The Atlas PV-10P also offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks.

The peg style truck adapters included with the Atlas PV-10P two post car lift are necessary to lift vehicles with running boards. The Atlas PV-10P peg style truck adapters (12 extensions) can be combined to raise the lift pads to reach the frame of most pick up trucks without damaging the running boards.

The Atlas PV-10P has symmetrical columns and includes a set of EZ-metric arms. These arms can be configured into the symmetrical position to lift a full loaded pick up truck OR these arms can be configured to the asymmetric position to offer easier opening of the front door on some vehicles.

The Atlas PV-10P two post above ground lift has single point release, overhead above ground configuration, EZ-metric arm configuration. The Atlas PV-10P car lift is powered by a 220 Volt (single phase) power unit.

Electrical Requirement:
The electric motor for the power unit requires 220 Volt (single phase) 60 Hz. We recommend using at least a 10 gauge (grounded) wire from the electrical panel. The power unit has a short pigtail (no plug) that can be wired to either a quick disconnect box (mounted on the lift column) or to a male/female plug combination. A 30 amp breaker is recommended.

Installation:
The Atlas PV-10P two post car hoist should be installed on a solid concrete floor. This PV-10P concrete floor should have a minimum of four (4) inches of concrete with 3000 PSI. The Atlas comes with the mounting hardware to anchor your two post lift to the appropriate concrete floor.

Most of our above ground lift customers install their own car lifts. The average time to install the Atlas PV-10P car lift is four hours.

We provide detailed installation instructions with all our two post above ground lifts and our four post above ground lifts.

Parts:
Greg Smith Equipment stocks a complete inventory of lift parts for all the lifts we sell. Lift parts and technical support personnel are available.

Certain competitors do not stock the lifts they advertise and do not stock any of the lift parts or accessories. Lifting a car is serious business.

Call the professionals at Greg Smith Equipment.

"World-Class" Products:
Greg Smith Equipment is proud to state that our manufacturers are definitely "world-class". Our Atlas products are sold throughout the world.

Instruction manuals that accompany products may contain certain specifications that do not apply to the product when used in the USA or Canada.

IE:
Electrical voltage requirements are different in the USA compared to other countries. There may also be certain accessory items that need to be included for Europe, but are not needed in the USA.

The Greg Smith Equipment Sales website contains accurate electrical (and accessory) information (for use in the USA or Canada) about your product.

Please review the GSES website and discuss electrical (or accessory) questions with your salesperson before placing your order.

Additional Features:

Commercial Grade

Single Point Lock Release

EZ-Metric Arms

"Padded" Shut-off Bar

Thick rubber covers on carriages

Powder coat finish

Adjustable Height - 11'10" or 12'2"

Free 12 piece truck adapter set

Mounting Hardware Included

5 Year Structural Warranty, 2 Year Power Unit Warranty

Watch a Competitor's 10,000 LB. Two Post Lift FAIL INDUSTRY TESTING:
Cheap lifts are dangerous!

Questions? Please call any of our locations: 800.262.1950 (Indiana) 800.715.1950 (Delaware) 800.768.4104 (Georgia) 800.602.9928 (Arizona) 800-360-0053 (New Hampshire) 800-305-5609 (Florida) 800-512-7611 (Texas)

Atlas PV-10P Specifications
Setup	Low	High
Capacity	10,000 LB.	10,000 LB.
Lifting Time	Ask Your Salesperson	Ask Your Salesperson
Overall Height	142" (11' 10")	146" (12' 2")
Height To Shut Off Bar	136" (11' 4")	140" (11' 8")
Overall Width	137 1/2" (11' 5 1/2")	137 1/2" (11' 5 1/2")
Outside Column to Outside Column	125" (10' 5")	125" (10' 5")
Maximum Lift Height (With Adapters)	82" (6' 10")
Maximum Lift Height (Without Adapters)	71 1/2" (5' 11 1/2")
Minimum Arm Height	4 1/2"
Between Columns	110" (9' 2")	110" (9' 2")
Column Size	14 1/2" x 7 1/2"
Column Thickness of Steel	6mm
Carriage Thickness of Steel	6mm
Arms Thickness of Steel	6mm
Drive Thru Symmetric/Asymmetric Configuration	96" (8') 90" (7' 6")	96" (8') 90" (7' 6")
Base of Lift	17 1/2" x 20 1/2"
Height Shut-Off	136" (11' 4")	140" (11' 8")
Cable Diameter	.375"
Cylinder Diameter	2.4"
Motor/Electrical Requirement	3 HP, 220 volt single (1) phase. A 30 amp breaker is recommended.
Oil Requirement	3-5 Gallons AW32/AW46
Shipping Weight	1,875LB

Before buying, please consider the following:

• Everything we post on Ebay is either in stock or contains accurate info regarding exactly when it will be. In other words, we don't make you wait! In fact, we have perhaps the largest inventory of above ground vehicle lifts, tire changers, wheel balancers, and motorcycle lifts in the country!


• We are NOT just an Internet site. We have been a brick and mortar operation since 1982. If you get a chance, please come visit one of our huge equipment showrooms.


• We have some of the most knowledgeable professionals in the industry. When you call our office during normal business hours, you will speak to a live person immediately. We realize that everybody's time is important and we do not believe in answering machines during normal business hours. Our company was started long before the Internet became popular, and we still welcome the "old-fashioned" phone call as a way to assist our customers in their buying decision. Call one of our locations with any questions.

Parts
Greg Smith Equipment has a well staffed service department that is augmented by a huge parts department. Most Internet wheel service companies are not concerned with after the sale service. Greg Smith Equipment understands the need for expert technical advice, backed up by a fully stocked parts department.

Greg Smith Equipment knows that our products (no matter how well built) will eventually need parts. We believe that a complete parts inventory (and a well trained service department) is as important as a well stocked product warehouse.

Shipping
The Atlas PV-10P will be shipped by common carrier. It will arrive in an enclosed truck and the customer is responsible for unloading it with a forklift (or something similar to that). You will save money on shipping by having it delivered to a business address or trucking terminal. You can have it shipped to a residence, but please note that you will need to have the necessary equipment to unload it (a $30 additional charge will be added for residential delivery). If you do not have a business where we can ship it, another option is to have it shipped to a trucking terminal. At the terminal, the staff will be able to load the product on your trailer. The same shipping rates apply for business and terminal delivery. Applicable sales tax will be charged if shipped to an Indiana, Georgia, Arizona, Florida, or Texas address. There is NO SALES TAX IN DELAWARE OR NEW HAMPSHIRE. Call one of our locations to receive a shipping quote. We offer great freight rates!

Pick Up
The lift can also be picked up at our facilities. Applicable sales tax will be charged if picked up in Indiana, Georgia, Arizona, Florida, or Texas unless a valid tax exemption form is provided. There is NO SALES TAX IN DELAWARE OR NEW HAMPSHIRE.