Find or Sell any Parts for Your Vehicle in USA

Boost Solenoid Bcs 4 Port Mac 46a-high Frequency For Turbosmart Aem Hi-temp on 2040-parts.com

US $1,071.00
Location:

Colorado Springs, Colorado, United States

Colorado Springs, Colorado, United States
Condition:New Brand:Mac Circuit Se7en Country/Region of Manufacture:United States Manufacturer Part Number:C7 4-HF

 Check out our  other items!

Be sure to add us to your favorites list!

This is a special version of  our standard 4 port solenoid, it is specially made for us so that it can provide a greater /wider useable Duty cycle range than the normal 4-port (more linear than the standard 46A-AA1-JDBA -1BA).  Normally for a given duty cycle range a 4 port valve cannot operate at as high a frequency as a 3 port valve, this valve extends the linear range of the 4 port. This way you can operate at higher frequency (resolution/response) and still target duty cycles in the 15-85% range. Google "CircuitSe7en Tech Info" for more info.


 Universal 4 port boost control solenoid , typically used with wastegates that have 2 ports.  Allows a wider range of boost control than any other method because full boost can be applied on either side of the wastegate diaphragm.  This is used when you need more dynamic range than a 3 port solenoid can provide.  (We also offer Mac 3 port solenoids).

 The same valve that many manufacturers re-label and mark up, why pay for a sticker?

 Includes (4) 3/16"  NICKEL PLATED brass hose barb fittings and one sintered vent/muffler.
All the Ports are 1/8 NPT so you can use any common fitting that you want including AN-adapters.  
Also includes one sintered high flow air muffler/vent filter. The sintered filter makes the installation easier & cleaner because you don't have to run another hose to your air cleaner.

The fittings are included (brass).We do not include AN type fittings, as most want the hose barbs and we are aiming to be the lowest cost supplier of these valves,we don't want you to pay extra for something you don't need. If you want AN fittings email us and we can supply them.

This boost control solenoid  will not degrade from  rich fuel mixtures or oil . Very high life and very resistant to sticking from contamination. 
  • Special HIGH FREQUENCY ,HI TEMP with plug-in black leads (brown wires used to be used for Hi-Temp in the non-plug in version)
  • Leads are 18" long.
  •  12 volt DC , polarity not sensitive.
  • FREE BRACKET
  • 1/8" npt ports
  • compatible with many & most boost controllers and ECU's : AEM,Autronic,E-boost etc,Neptune, Hondata,ECtune,Megasquirt,VEMS.
  • (4 ) 3/16"NICKEL PLATED brass hose barbs "tails"
  • (1) sintered vent/muffler
  • This is an industrial quality valve, Autronic,e-boost and AEM have been using them for years on everything from rally cars to drag cars, there is a reason they use this valve, it is very durable and responsive.
  • Contact us for installation tips.
  • This valve can be driven by many stock ecu's as well as many aftermarket stand-alones and regular stand alone boost controllers.   
  • See our other items if you are looking for  a 3 port   MAC 35A-AAA-DDBA-1BA   
  • IT IS UP TO the PURCHASER to decide if this valve is suitable for it's intended use the seller will not be responsible for damage of any kind that may occur due to the use of this product!!!
YOUR SHIPPING ADDRESS MUST BE CONFIRMED WITH PAYPAL DO NOT ORDER OTHERWISE.

 


                               INTERNATIONAL INFORMATION:   
YOUR SHIPPING ADDRESS MUST BE CONFIRMED WITH PAYPAL DO NOT ORDER OTHERWISE.  
  Interested in large quantity   contact us :robertoATcircuitse7enDOTnet  (modify the anti spam spelling)
NEW  International shipments are all EXPRESS 4-6 day delivery on average,worldwide.
NEW  International shipments,include free shipping insurance and tracking !!! .
For SOME countries LOW COST USPS priority mail is available here :  http://www.ebay.com/itm/330681004581?item=330681004581&viewitem=&vxp=mtr#ht_2012wt_1165 
  
 International orders are shipped via USPS First Class EXPRESS International  
 International orders ; we charge a flat fee for up to 10 valves, you MAY NOT order more than 8 at once. (Make 2 separate orders if you want more than 8). This is because the flat rate envelope will only allow room for 8 pieces.
      So for 1-8 valves the shipping cost is the same , so more is the better value!
The shipping and handling cost include: insurance,filling out customs forms,filing out express forms and the actual postage,and the packaging materials and labor time.
Sorry we used to allow the cheaper first class int'l shipping, but it has become too unreliable.Currently we are sending "test" packages worldwide to test first class  reliability.  If you want to try  First Class Mail now (it saves money), email here: robertoATcircuitse7enDOTnet



30 day warranty on items returned if cosmetically perfect. So test it before mounting it! (contact with mounting points may blemish it)
15% handling fee on returned items.
(these valves are all tested before they are shipped and they are very robust ,we have not had any returned to us ever!)

 

Motorcycle deaths spike in 2012

Wed, 24 Apr 2013

Motorcycle fatalities rose by 9 percent in 2012, totaling more than 5,000 deaths, according to data released Wednesday by the helmet laws play a part, as well. According to the GHSA, only 19 states currently require motorcycle drivers to wear a helmet at all times. This number is down from 26 states in 1997, showing the willingness of states to repeal helmet-required legislation.

Lamborghini Murcielago waves good-bye

Fri, 05 Nov 2010

It was a fitting farewell to one of the most audacious Lamborghinis ever built. A group of the most iconic V12 cars ever to put rubber to asphalt gathered at the factory in Sant'Agata Bolognese, Italy, for a special exhibition before escorting the last Murcielago, an LP 670-4 SuperVeloce, out of the Lamborghini Museum in a symbolic last ride. The 350GT was in attendance at the event, as was the futuristic Miura, a Countach and the fire-breathing Diablo, among others.

Driving licence costs to be cut by almost a third

Mon, 28 Jul 2014

The cost of a driving licence is going down Actually the cost of applying foe a driving licence is a drop in the ocean compared with just about every other motoring cost, but the news that the Government are planning to cut the cost of anything is always welcome news. The Roads Minister, Stephen Hammond, has announced that the Government is planning to cut the cost of applying for your first driving licence from £50 to £34 if you process your application digitally and by 15 per cent if you do a paper application. That will also see the 10 year renewal of photo licences fall from £20 to £14 and driver tachograph card – for commercial drivers – will also drop from £38 to £32.