Car Reverse Rearview Back Up Camera Wireless Kit Mini Camera Car Kit New Arrival on 2040-parts.com

Car Reverse Rearview Back Up Camera Wireless Kit

• Image sensor: Coms1/4

• TV system: NTSC/PAL

• Resolution: 640(H)×480(V) Pixel

• Horizontal resolution: 420TVL

• (Front)No mirror function/(Rear) mirror function

• Automatic White Balance

• Automatic backlight compensation

• Minimum illumination 0.2 lux only

• RCA video output Vpp/75Ohm

• PAL:625Lines.60Field/sec

• NTSC:525Lines.60Field/sec

• Operating on 12V DC / ca. 200mA

• Operating Temperature: -20~ 60(degrees Celsius), RH95% Max

• Storage temperature: -30 ~ 60(degrees Celsius), RH95% Max

Installation:

• Use the hole driller to mount the camera at the back of the car (on the license plate back window or other suitable place)

• Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.

• Connect the video cable of the camera to the extension cord.Connect the extension cord to your car monitor.

• You will see the images when your car is in reverse shift.

About the 2.4Ghz Wireless receiver and transmitter:

Features:

• This adapter is an advanced wireless module for car DVD reverse camera that enables normal reverse camera to become wireless!

• Fit all RCA composite video connections

• Connects to rear-view camera and front video screen

• Take one minute get your camera become a wireless camera

• Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)

• 100M wireless receiving distance

• Transmitter/Receiver Cable Length:1.5m

How to install:

• Take out your stock license plate light at the back of your car.

• Fix the camera to where the stock license plate light was.

• Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power.

• Connect the wireless module (transmitter) to your camera via the two cables yellow plug for AV output and black plug for power.

• Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative.

• Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.

• Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative.

• You will see the images when your car is in reverse shift.

Package Content: