Item Description

FABRIC: Velour cloth fabric with thin foam type backing, which covers the fronts of the seats. Front buckets will have a 3/4 to full stretchy polyester backside, depending on the height of the seat (the part you see from the rear seat of the vehicle) that will help conform the seat cover to the molds of the seats. Both pieces of The FREE rear bench will be trimmed in the same polyester for added conformation. If your rear bench back rests are able to fold down independently from one another you will need to cover both pieces as one unit to use this FREE standard bench. Installed with pre-sewn elastics and S hooks (also provided).

These Seat Covers Are Machine Washable, Cold Water, Drip Dry.

COLOR: Red and Black. Computer screens will show colors differently. If you have questions please call 928-875-8817

INSTALLATION: These seat covers slip over your existing factory seats and fasten underneath the seat with pre-sewn elastic straps and S-hooks. You may adjust these straps as needed for a more custom look.

The difficulty of this seat cover package to install depends on the ease at which your head rests are removed and on the access that you have behind and beneath your seats.

INCLUDED IN THIS PACKAGE: 2 standard low back bucket seat covers and 2 matching head rest covers for front buckets, and a FREE 2-piece standard rear bench (one piece will wrap the back part of the bench seat and the other piece will wrap the seat area).

PLEASE NOTE: Both of your driver and passenger front row bucket seats must have the same size seating area for these seat covers to fit. Also, these seat covers will cover any pockets that may be located on the back of your factory seats. Depending on the location of seat controls, levers, or bolsters, modifications may be needed. These features will also limit the access under the seat, which may make installation more difficult.

FREE Bench Seat Cover Details: Our bench seat cover, included in this package for FREE, will come in 2 pieces, 1 piece will wrap the backrest portion of the bench seat as one unit and the 2nd piece will wrap the seat cushion area as one unit. Because of the 2 piece design this bench cover will fit most standard benches (please see bench seat type and Measurements shown above). Some rear benches will need to be removed for installation.

PLEASE NOTE: If your bench seat is Smaller that 54-55 inches in length and Shorter than 31 inches in height, The excess Fabric will need to be wrapped behind and beneath your bench seat by connecting the installation straps to each-other on the back side of the bench. The difficulty of this bench seat cover to install will depend on the access behind and beneath your seat. Some Benches will need to be removed for installation.

This bench seat cover best accommodates bench seats without any type of head rests or with head rests that may be removed. We recommend removing your bench seat head rests, if applicable, before installing the back rest seat cover portion of your bench. After your bench seat cover is installed, you are able to make tiny X's in the seat cover to re-insert your head rest posts.

BENCH BACKREST MEASUREMENTS:The bench seat backrest cover is approximately 54-55 inches in length and 31-32 inches in height and will have 5 inches of stretchy polyester on the 2 outer edges with alternating Panels lining up vertically in-between (when installed this polyester trim will be on the sides of the seat closest to the doors of the bench seat backrest).

BENCH SEAT CUSHION MEASUREMENTS:The bench seating area cover is approximately 54-55 inches in length and 22-23 inches wide and will have 5 inches of stretchy polyester on 3 sides (when installed this polyester trim will be on the sides of the seat closest to the doors and the seat front edge) and will have alternating Panels lining up in-between.

IMPORTANT FREE BENCH INFORMATION!: This standard bench seat cover will cover your entire bench seat as one unit with your armrest, if applicable, folded in the upright position along with the back of your seat. Most bench seats will have the seat belts exiting through the crease where the backrest of the seat meets the seat cushion area at the back of the seat, providing openings for the seat belts. You may cut openings as needed for seat belts or other unique features (excluding cuts on seams, or in the stretchy polyester material). In case you decide you want to return the covers, please make sure the seat cover is satisfactory before making any modifications. The functionality of the seat-belts should be kept with this standard bench seat cover installed, if installed properly.

NOTE: These covers will only fit the seat style as pictured above. Many vehicles will have more than one seat type that comes standard in the same year, make, and mode. To ensure a proper fit, please read the provided details and measurements in our item page description to help ensure these seat covers will accommodate the seat type in your vehicle. If you have questions concerning fit please contact us via eBay or you can telephone us with the number on our about me page

ATTENTION International buyers!