LINGENFELTER CTAP-001
CLUTCH & THROTTLE POSITION ACTIVATION SWITCH 

Description:

The CTAP-001 is a programmable clutch pedal and throttle position sensor  activation switch. This module can be used on many newer GM vehicles that no  longer use a clutch position switch, but instead a position sensor that relays a  rising or falling 0-5 volt sensor signal to the ECM. This signal communicates  the exact clutch pedal position, accelerator pedal position, or throttle  position. The CTAP-001 allows external devices looking for a +12 volt or ground  activation signal like a nitrous controller, 2-step, or other devices to be used  on vehicles that would not normally have a switched signal available.

Features:
• Connects to clutch pedal (CPP), accelerator pedal (APP), throttle  position (TPS) sensor or most other 0-5 volt sensors 
• Outputs include 
    • Normally OFF ground activation 
    • Normally ON ground activation 
    • Normally OFF +12vdc activation 

Benefits: 
• No need to install a separate microswitch on the clutch pedal 
• Works with rising or falling voltage signals 
• Activate/deactivate anywhere in the clutch or throttle travel 
• Adjustable activation point in 1% increments 

Specifications:

• Available output types:

  • Normally OFF +12vdc

  • Normally ON ground

  • Normally OFF ground

• Analog 0-5 volt input that can accept a Throttle Position Sensor (TPS),  Clutch Pedal Position (CPP) sensor, Accelerator Pedal Position (APP) sensor,  or most any other rising or falling 0-5 volt signal.

• CTAP-001 switch settings can be adjusted in 1% increments from 0% to 99%.

• Adjustable hysteresis settings of 0%, 0.5%, 1%, 1.5%, 2%, 2.5%, 3%, 3.5%,  4%, and 4.5%

• Custom molded high temperature glass filled Nylon 6 enclosure.

• Fully encapsulated (potted) construction for increased durability.

• Outputs rated for up to 0.75 amps each.

• The CTAP-001 outputs should control a relay for higher current level  applications.

• All three outputs (+12v activation normally OFF, GROUND activation normally  ON and OFF) can be used simultaneously.

• Outputs have a self-protect feature and will turn OFF in case of a direct  short or over current condition.

• Operating voltage range: 9.0 to 18.0 volts.

• Input signal impedance: 100k ohms.

• Current draw: 0.1 amp plus current draw of device being controlled (when  active).

• 90 day warranty (from date of purchase).

Mfg. Part #: L460190108

Link to product instructions (with example wiring diagrams included).

What is included in the kit:

Condition:

• Parts are brand new units

Warranty:

• 90 day manufacturer warranty (see warranty  statement in instruction manual available above for download)