Item Description

Flexible Shaft Coupling for 5" B/W, Hurth - 13HP/100RPM Capacity

The R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The contoured disc gives clearance for the bolt heads, and is able to flex freely to take up any temporary misalignment of the engine and shaft, due to flexing of the boat structure or the engine moving on its rubber vibration isolation mountings. Forward thrust is taken in compression on the disc between the two half couplings and reverse thrust is taken again in compression on the disc between the two fail straps. In the unlikely event of a disc failure the steel straps make the coupling fail safe and ensure drive is maintained in both forward and reverse.

To calculate power of coupling required:
Horse Power of Engine x Reduction Ratio x 100 = HP/100RPM
      Engine Speed

Example:
Ford 150 HP at 2500 RPM with Borg Warner Velvet Drive 72C 2:1 Reduction Ratio
Engine Horse Power is 150 HP, Max Rated RPM is 2500, Reduction Ratio is 2:1
150/2500 X 2 x 100 = 12hp per 100RPM
Coupling required is 910-009

The R & D Marine Flexible Coupling fits between the transmission output flange and shaft coupling. It is designed to protect a boat's drivetrain. The unit will reduce vibration, compensate for some misalignment, isolate the shaft and absorb shock loads.

The flexible disc is machined from a resilient and durable polyurethane. It allows the unit to flex, absorbing vibrations and temporary misalignment of the shaft and engine due to movement of the engine or flexing in the vessel's structure.

The polyurethane disc is backed up by two metal compression straps, one on either side of the flexible coupling. These metal straps hold the system in constant compression whether the drivetrain is in forward or reverse. This feature extends the life of the system dramatically.

The R & D Marine Flexible Coupling will also absorb shockloads resulting from gear changes, or the propeller striking a submerged object. The polyurethane disk will distort with light shock loads and is designed to be sacrificial in the event of severe shock load, saving on expensive drivetrain repairs. If the disc is destroyed from massive shockload the metal compression straps keep the coupling intact ensuring that the drive system is functional in both forward and reverse.

Why R&D Marine Flexible Shaft Couplings?
  • Polyurethane flange creates a flexible barrier to reduce drivetrain noise and vibration to quiet your drivetrain
  • Absorbs transmission shock load caused by the propeller and high speed gear changes. This helps to reduce and avoid costly transmission damage
  • Fail safe design, both forward and reverse thrust is taken in compression from the steel straps, giving a durable design even in extreme conditions

About Us

Click Me!
At CE Showroom we foster an environment of engagement where associates are invested and involved in the future of the company.We are all on the same page as a company and we are committed to becoming the most loved and trusted marketplace on the web by offering superior shopping experience, rapid delivery, and stellar customer service.
Selection
With more than 30,000 products and an award-winning web site, CE Showroom earns the loyalty of tech-enthusiasts and novice e-shoppers alike. We equip our customers with state of the art decision-making resources such as detailed specs, how-to's, customer reviews, and high resolution photo galleries with a state of the art Auto Zoom Function.
Customer Service
At CE Showroom we are all working in the same direction, each of us must live and breathe CE Showroom's values and use them as a guidepost for our actions and decisions. We expect all of our associates to maintain the highest of ethical standards. Our integrity must never be compromised. Integrity is the foundation onto which all other values are placed." We believe true service starts after the product you ordered arrives at your doorstep. We follow through on our commitment to excellence with exceptional customer service. Our team of service associates are available via phone, e-mail and online chat to ensure your utmost satisfaction.
Customer Satisfaction
Whether you are a novice or a tech guru, you are sure to enjoy shopping at CE Showroom. We offer customers a peace of mind with lightning fast delivery and cutting-edge logistics and we work passionately to exceed your expectations every time.

International Policy

Click Me!
About Customs, Duties & Taxes
ALL items are purchased in the US and designed for use on 120VAC @ 60Hz. The customer is responsible for making sure the power will work in their country.When ordering from CE Showroom, you're responsible for assuring the product can be lawfully imported to the destination country.Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.The recipient is the importer of record and must comply with all laws and regulations of the destination country. Orders shipped outside of the United States may be subject to import taxes, customs duties and fees levied by the destination country. The recipient of an international shipment may be subject to such import taxes, customs duties and fees, which are levied once a shipment reaches the recipient's country. Additional charges for customs clearance must be borne by the recipient; we have no control over these charges and can't predict what they may be. Customs policies vary widely from country to country; you should contact your local customs office for more information. When customs clearance procedures are required, it can cause delays beyond our original delivery estimates.
Note: It's illegal to falsify customs declarations or mark an item as a "gift" in order to avoid customs fees.

Shipping Policy

Click Me!
Shipping Time -- Most orders received before 2:00PM PST will ship the same day, provided the product ordered is in stock. Most orders received after 2:00 PM PST will ship the next business day.Orders are not processed or shipped on Saturday or Sunday, except by prior arrangement.We cannot guarantee when an order will arrive. Consider any shipping or transit time offered to you by Sample Store or other parties only as an estimate. We encourage you to order in a timely fashion to avoid delays caused by shipping or product availability.

Returns

Click Me!
We guarantee against manufacturers' defects for 30 days from the date of the delivery on all products except for items listed in the Exception Section below. Products with Manufacturer Warranties which exceed 30 days, may be returned directly to the manufacturer according to their instructions. All returns/exchanges must be made within 30 days of receipt of the merchandise. Merchandise must be in original factory condition, and must include all original packaging materials, warranty cards, manuals and accessories.
Exception Section - Items Not Covered Under this return policy:
TVs: If the item is defective the customer will need to contact the Manufacturer directly. If the item is unwanted and was not opened, the item may be returned to us per to our "Unwanted Returns" section.
Gaming (includes Brand New consoles and games for all different types of systems): All of the gaming comes with Manufacturer's warranty unless specified otherwise in the description section of the item. If the item is defective customer will need to contact Manufacturer. If the item is unwanted and was not opened, this item may be returned to us per our "Unwanted Returns"; section.
Personal Care Items: If the item is defective the customer will need to contact the Manufacturer directly. If the item is unwanted and was not opened, this item may be returned to us per our "Unwanted Returns" section.

Items may be returned only with prior authorization.

All shipping and handling fees are non-refundable with an exception where CE Showroom has made an error by shipping and incorrect item to the customer. In this case, Member must contact CE Showroom to obtain a return label or request a merchandise pick up. Once item is returned back to the warehouse, a correct replacement unit will be shipped out or store credit issued for the full amount of the order if the correct unit is unavailable. CE Showroom must be informed of the receipt of incorrect merchandise within a one (1) week of the delivery.
Unwanted Returns: Unwanted product returns will be subject to a 20% restocking fee and must have a Return Merchandise Authorization number (RMA#). Merchandise must be in the unused condition only.
Refused Delivery: Returns falling under this category will be treated as GÇ£Unwanted Returns" consequently they will be subject to a 20% restocking fee. The customer will also be responsible for the return shipping cost incurred by the action of refusing the delivery. Consequently, a refund will be issued less 20% restocking fee of the value of the merchandise and less shipping and handling fees both ways.
Defective Items: A customer must return merchandise within 30 days from the date of delivery with prior Return Merchandise Authorization number. If an exchange is not requested at the issuing time of the RMA an automatic refund will be applied once merchandise is returned back to the warehouse.


inkFrog Analytics