Description

Product description :The fuel level gauge is suitable for all kinds of oil level sensor, using the cross coil drive pointer, product durability and good shock resistance, with anti fog function.

Name: Panel opening diameter 52mm Fuel Level Gauge With Background Light
Model: 526661
Material:Plastic，Rubber，Metal
Product size：approx.60mm*57mm(H*Dia)
Panel opening diameter : 52mm (2-1/16")
Volt: 12V/24V
Resistance: 240-33
Output: 240-33 Ohms (American resistance value)
Operating temperature: -40℃～+85 ℃
Protection level: IP67
Face color: White

Application:
Suitable for various oil level sensor, display the position of the oil tank level;12V/24V universal.
Main applications: craft, engineering machinery, vehicles, generators, engines, machinery etc.

Installation steps：
1.Cut a 52 mm (2 1/16") diameter pannel hole in panel (II).You will need a minimum clearance of 55mm (2 3/16") behind the panel to fit the gauge.
2.Remove fastening ring (I).There is an alignment tab on the gauge body (III)，place the gauge in the panel hole and mark the position of this tab to correctly align the gauge.
3.Insert gauge through panel from the front，fit and tighten fastening ring (I) from the rear.
4.Connect wires according to wiring instruction.Note the use of dropping resistors for 24V circuit.Select either Orange or Yellow wires for backlighting.Wire colour corresponds with backlight coulour.
5.Insert wire harness (IV) into port at the back of the gauge.
6.Please note，if the gauge is a voltmeter there is no black wire or resistors in the kit.

Connecting instructions：
Red-Battery（+）
Blue-Battery（-）
Black-Sensor
Orange-Red light
Yellow-Yellow light

Package contains
1x Fuel Level Gauge
1x Instruction