This is what you need if you have replaced your stock exhaust and now have a Check Engine Light (CEL) showing up!!!
Plug and Play unit, don't need to splice or cut wires, very simple and clean once installed.
Description:
The Servo Buddy is a small, light weight servo fix that eliminates the need for the exhaust servo motor, which is not needed with any aftermarket exhaust system. These devices are typically called EXUP valves, SET valves or exhaust servos. Typically when you purchase an aftermarket exhaust, a small plate is included to bolt onto the top of the exhaust servo. The purpose of this plate is to restrict the servo’s movement so the bike’s computer still thinks the exhaust valve is connected and working correctly, preventing the FI (fuel injection sometimes mistakenly called the F1) fault light from illuminating on the dash board.
The problem with these plates is they require you keep the servo motor installed, taking up a lot of valuable room that could be used for power commanders, traction control computers, quick shifters, or a huge variety of other accessories. Additionally, the servo motor is dead weight, providing no benefit. After all, half the benefit of that fancy exhaust system was to drop weight, right!
The servo buddy uses OEM connectors and easily snaps into place replacing the bulky servo motor. It can be zip-tied to the wire harness and takes up virtually no space. The body is shrunk wrapped rather than encased in a housing to provide the smallest footprint possible, while blending into the factory wire loom. It works by electrically mimicking the working exhaust servo so the computer thinks all is well with the exhaust circuit preventing the FI light from coming on due to exhaust faults while still keeping the light’s other functionality to warn you if anything else is wrong with the bike! Simply disconnecting the FI light or putting tape over it could mask potentially serious problems and lead to a damaged engine.
To provide a reliable long service life, all parts were spec'd out to meet military or automotive standards meaning the device is tolerant to a wide temperature range. Additionally, the entire circuit board has been encased in a thick epoxy potting compound to provide protection from moisture and vibration. It will be EXTREMELY reliable under all conditions, whether your ride street, race, track, or adventure ride.
Servo Buddy weight = 20 grams (0.6 oz)
Fits:
-
2007-2013 Kawasaki Ninja 1000
Also Fits:
-
2004-2013 Kawasaki ZX10R
-
2005-2013 Kawasaki ZX6R (and 636)
-
2003-2006 Kawasaki 636
-
2007-2012 Kawasaki Z750
-
2007-2013 Kawasaki Z1000
• The Servo Buddy is also available for most Honda, Suzuki, and Yamaha applications as well; Check our other auctions for those applications or contact us directly
Includes: Servo Buddy ONLY (does not include actual servo motor, it is only in pictured above for size comparisons)
Recently Servo Buddy updated it's products to include new ABS plastic housings and updated packaging so it will look like the last picture down with the Black ABS Plastic Box instead of as pictured in the shrink wrap at the top of the screen.
We are Paypal Verified and we accept and prefer Paypal for all eBay purchases. Paypal protects everyone involved in the purchase and will allow easier refunds to our customers when the situation calls for it. If you would like to pay by another method please contact us directly before purchasing.
All of our products include FREE Shipping in the LOWER 48 United States. We ship most orders through UPS Ground and can include a tracking number upon request. In the event you have special shipping needs or would like to combine multiple orders into a single shipment please contact us.
Wicked Moto Parts is a retailer of aftermarket parts and accessories for modern sport bikes and we opened in 2007. We have been in business for almost 5 years in the Midwest and our customers include: Drag racers, Road racers, Stunt riders, Showbike builders, and casual street riders. We recently started selling on eBay to spread our name beyond the Midwest so please don't be scared of our low feedback.....Over the next few months you will see that climb quickly with satisfied customers. If you are looking for a product we don't have listed on eBay please don't hesitate to contact us. We work with hundreds of companies and manufacturers which gives us a very wide selection of brands and products. We appreciate each and every customer and pride ourselves in building return customers for life! Thanks for giving us the chance to earn your business!
Please Leave Us 5 Stars For ALL Feedback Ratings When Rating Us; If you feel for ANY reason you aren't 100% satisfied with your purchase then please contact us directly before leaving the feedback. We pride ourselves in having perfect feedback from EVERY customer.
Please don't hesitate to contact us! Unfortunately eBay no longer allows sellers to list email links for contact, but if you need to contact us we can be reached by eBay messaging. Our mission is to make sure you are 100% satisfied with your purchase and that you come back to us in the future for any of your needs.
Please Also "Like" Our Facebook Page!!! We Post Specials and Updates On That Page and You Can Also Contact Us with Questions Via Our Wall.
