IF YOU WANT THE AUTHENTIC OLD SCHOOL LOOK YOU HAVE TO START WITH THE RIGHT PARTS ~ DON'T SETTLE FOR 'CLOSE ENOUGH'
ULTIMA "COMPLETE" ELECTRONIC WIRING SYSTEM / HARNESS
THE PROVEN "OLD FAITHFUL" DESIGN FOR EASY WIRING OF YOUR CUSTOM BIKE
The sealed main electronic module is 5" X 2" and has brackets to mount to any frame tube (approx 2-1/4" high off the tube)
Includes diagnostic LED's - a big help when wiring and troubleshooting - this is the one to get if you have room on your frame to mount
Also note picture of back side of main module - since it is fully "connector-ized", it can be removed easily without cutting wires. etc.
All flasher, relay & circuit interrupters are included
in one small package that can be mounted in a wide variety of locations.
This module and its plugs are waterproof and LED's are used to
troubleshoot problems. Kit includes all wires, connectors, module & heat
shrink tubing
The circuit breaker protection circuits are internal to the box.
The diagnostic LED’s are used to locate shorts or overloads. Pinched or bare wires, faulty components
or too much current draw usually causes these. If an LED is on, turn off the bike, locate and correct the problem,
then turn the bike back on. The bike must be turned off to reset the protection circuit.
The unit will provide the starter wire/current to the starter button - and to the starter relay. Buyer must provide the starter, the starter relay itself (usually part of the starter), and the big wire from the main starter bolt to the battery.
This unit provides +12V to power the ignition system (pin 6 white w/ black stripe to coil) , but does not include any engine control, management or timing/advance functionality
Controls self cancelling turn-signals, but you will need the indicator harness - sold separately in our ebay store
SEE THE COMPLETE INSTRUCTIONS ON HOW TO USE HERE:
http://www.ultimaproducts.com/18-530.pdf
This
unit may or may not function correctly with LED type signal or LED type
brake lights, because of their very low current draw. In some cases
resistors or load equalizers may help, but Midwest/Ultima cannot
guarantee compatibility with all LED type bulbs
Note: Due to the risk of unseen internal damage we strongly prefer not to take returns on vital electrical parts, we will only consider a return on this item if it has not been powered-up and is as-new. So please do your research on what will work best for your project BEFORE buying
ASIAN IMPORT
"THE FINE PRINT" - PLEASE READ ALL BEFORE BUYING
SOME FITTING MAY BE REQUIRED SO PLAN CAREFULLY BEFORE ALTERING PARTS - SORRY WE CANNOT ACCEPT ALTERED RETURNED PARTS
WE SHIP AS QUICKLY AS POSSIBLE, BUT PLEASE ALLOW 5 BUSINESS DAYS FOR US TO PREPARE YOUR ITEM FOR SHIPMENT AS YOU PLAN WHEN TO BUY
ALL CUSTOMS DUTY, FEES AND TAXES ARE THE RESPONSIBILITY OF THE BUYER AND ARE DUE AT DELIVERY, SORRY NO RETURNS ON INTERNATIONAL ORDERS
CHECK THE ITEM DESCRIPTION CLOSELY AND ASK ALL QUESTIONS FIRST - RETURNS FORCE US TO ADD COST AND THAT HELPS NOBODY IN THE LONG RUN
On Jan-12-10 at 15:08:18 PST, seller added the following information: