Find or Sell any Parts for Your Vehicle in USA

Code Alarm Catx-50 Original Remote Control For Ca-1050, Ca-2050 & Ca-5050 on 2040-parts.com

US $29.95
Location:

Deltona, Florida, United States

Deltona, Florida, United States
This remote was used on a demo board. It is in excellent condition and has been tested.
Brand:Code Alarm Number of Remotes:1 Model:CATX-50 Warranty:No Manufacturer Part Number:FCC ID H50T43

This listing is for a used CATX-50 original remote control. It was used in a demo board so it is in excellent condition and has been tested. You can find the programming instructions at voxrightnowdotcusthelpdotcom or see below


It will work with CA-1050, CA-2050 and CA-5050 code alarms. 

Programming the Code Alarm CATX50 Transmitter

CATX50 Programming Guide

Additional Information: The CATX50 is a replacement transmitter for the CA1050CA2050 and CA5050.

To Program the CATX50 Transmitter:

  1. Enter the vehicle, and turn the ignition switch to the ON position.
  2. Press and release the Programming button switch 3 times.
  3. Press and hold the LOCK button of the transmitter you wish to program.
  4. The lights will flash 1 time, indicating that the system is accepting the programming of channel #1 which
    is lock. Repeat step 3 for each transmitter you wish to program.
  5. Press and release the valet push button switch 1 time to advance to channel 2.
  6. Press and hold the UNLOCK button of the transmitter you wish to program.
  7. The lights will flash 1 time, indicating that the system is accepting the programming of channel #2 which
    is unlock. Repeat step 6 for each transmitter you wish to program.
  8. Press and release the valet push button switch 1 time to advance to channel 3.
  9. Press and hold the TRUNK button of the transmitter you wish to program.
  10. The lights will flash 1 time, indicating that the system is accepting the programming of channel #3 which
    is trunk. Repeat step 9 for each transmitter you wish to program.
  11. Press and release the valet push button switch 1 time to advance to channel 4.
  12. Press and hold the STAR button of the transmitter you wish to program.
  13. The lights will flash 1 time, indicating that the system is accepting the programming of channel #4 which
    is remote start. Repeat step 12 for each transmitter you wish to program.

Citroën to unveil flagship model in Beijing

Tue, 20 Mar 2012

Citroën has released two teaser images for a new luxury flagship model to be unveiled at the Beijing motor show next month, as part of its efforts to reposition the brand further upmarket with its DS model range. The car, which is to be the automaker's fourth and largest model in its DS range, appears to be a direct descendent of the Citroën Metropolis Concept, first seen at the Shanghai World Fair in 2010. Although it is unclear whether or not the model seen in the pictures will be the production version of the Metropolis, the two clearly share many design features.

Toyota confirms sticking accelerator fix

Mon, 01 Feb 2010

The Toyota fix for the sticking accelerator problem (click image for full size) It’s been a fraught time for Toyota with the recall of millions of cars around the world to remedy a faulty accelerator pedal with the potential to stick. And no one – Toyota seemingly included – was too sure exactly how the car maker was going to address such a mammoth problem despite the  Toyota Recall. But it seems the fix has been sorted.

BMW Concept X4: Official

Fri, 05 Apr 2013

The BMW X4 – in concept form – has now been officially revealed ahead of its debut at the 2013 Shanghai Motor Show. Yesterday we had the first photos of the X4, as the X4 Concept leaked, but now we get BMW’s official X4 details ahead of the debut of the Concept X4 at the Shanghai Motor Show at the end of April. And really, it’s very much what you’d expect.