Cofair Quick Roof 6" X 25' (roll) White For Rv's/mobile Homes - Part #wqr625 on 2040-parts.com

Original QUICK ROOF ™ Self-Stick Aluminum Roll Roofing

A Fast Application, Multi-Purpose Roofing and Waterproofing Sheet from CPI

• Waterproof/Weatherproof
• Sticks to most surfaces
• Aluminum surface reflects heat – reduces energy costs
• Low cost/Labor saving/Easy to install
• Light in weight/Easy to handle
• Tough and durable – puncture and abrasion resistant
• Stretches to allow for building movement
• Requires no coating for exposure to sunlight
• For roofing, waterproofing, patching and repair, hundreds of other uses
  

Why QUICK ROOF is the fastest, easiest and most economical solution to your waterproofing problems.

What is QUICK ROOF?
CPI starts with a reflective aluminum foil. Under the foil are rugged, waterproof polymer films. Laminated beneath the films is a thick layer of rubberized asphalt. The asphalt compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier. Finally, a high-quality release paper is applied to shield the adhesive surface until the QUICK ROOF waterproof repair is installed.

Why an aluminum foil?
The high density aluminum foil used in the manufacture of QUICK ROOF reflects sunlight and reduces rooftop temperatures by an estimated 22.5%. This membrane may be exposed to direct sunlight without the use of a coating, which saves time, labor and money.

Where should I use QUICK ROOF?
Use this product anywhere you want a fast, dependable waterproofing barrier. Applying waterproofing materials is generally a messy, complicated process requiring much labor, equipment, and skill. QUICK ROOF simplifies the operation –you just peel off the release paper and apply the waterproofing sheet to any prepared surface. QUICK ROOF may be used for roofing, waterproofing, patching and repair or any job requiring tough, weatherproof protection.

How is it installed?
Simple...align sheet and apply to clean dry surface by removing the release paper as the material is carefully unrolled and pressed into place. QUICK ROOF bonds to itself at overlaps. No heat, glues, tapes, fasteners or special tools are required ... you need only a pair of scissors or utility knife. Some surfaces will require cleaning and/or priming.

Can QUICK ROOF be used for repair work?
It’s an excellent choice for patching smooth asphalt roofs. The old roof should be cleaned and primed as necessary, any blisters or irregularities repaired to present a smooth surface. QUICK ROOF is then applied to leaking areas. A minimum 12”of solid contact should be allowed between the edge of QUICK ROOF and any known leaks. A bead of caulk will help to protect exposed edges. Narrow rolls are available for repairs and flashing.

Product Description
QUICK ROOF is a self-adhering waterproofing material with a reflective aluminum surface. The sheet features multiple laminations of special aluminum foil, high density polymer films and a thick layer of rubberized asphalt waterproofing compound. The aluminum foil reflects the sun to lower rooftop temperature and reduce energy costs. The films stabilize of defense against leaks. The rubberized asphalt seals tightly at the overlaps and around most punctures, and forms a long- lasting waterproof barrier. QUICK ROOF requires no coating.

Special Features
The CPI production facility is specially designed to make a superior waterproofing membrane. QUICK ROOF offers the contractor and property owner these extra features:

• Eliminates Leaks –multiple layers of protection seal out water. Rubberized asphalt won’t crack or dry.
• Sticks to Most Surfaces – QUICK ROOF sticks to roof decks for ease of application and to eliminate movement of water under the membrane.
• No Coating Necessary –with QUICK ROOF you simply peel off the release paper, apply to any prepared surface ...and the job is done!
• Easy & Fast to Install – QUICK ROOF eliminates the need for big crews, hot kettles, torches, adhesives, fasteners, etc. install QUICK ROOF using only scissors.

SEE COMPLETE INSTRUCTIONS IN BOX BEFORE APPLICATION

General
QUICK ROOF material. Apply QUICK ROOF in fair weather at temperatures above 60° F. A minimum slope of 1/2”per foot is required. Not designed for ponding areas. NO TOP COATING IS REQUIRED. Storage: Keep rolls dry, protect from sunlight.

Surface Preparation
QUICK ROOF may be applied directly to roof decks including wood, metal, masonry and existing smooth asphalt roofs. Because of the unpredictable condition of existing roofs, CPI cannot guarantee the performance of QUICK ROOF over mineral surfaces. The surface to receive QUICK ROOF must be clean, dry and free from oil, grease or debris –prime where necessary.

Installation
QUICK ROOF is easily installed by removing the release paper and pressing the aluminized membrane into place. QUICK ROOF can be cut to fit using scissors or razor knife. QUICK ROOFadheres to the deck and to itself when overlapped. When overlapping the product, 3” side laps and 6”end laps are required.

Align sheet. Peel off first 2’ of release paper and adhere sheet to the substrate being careful to maintain proper alignment. Carefully unroll, peeling the release paper and pressing into place as you go. Refer to NRCA ROOFING & WATERPROOFING MANUAL for complete flashing details.

Small wrinkles are not desirable but can be smoothed out and will not affect the roof’s performance. Large ones should be avoided and repaired by cutting and patching before the next roll is applied.

WARNING:
QUICK ROOF is slippery. Use caution when walking or standing on the product. QUICK ROOF is reflective and can contribute to sunburn. Protect skin and eyes.