Find or Sell any Parts for Your Vehicle in USA
Aviation Parts > Engines > Complete Engines

Continental Tsio-520-r6 Engine And Turbo System Firewall Fwd!! 310 H.p. on 2040-parts.com

Location:

Greeley, Colorado, United States

Greeley, Colorado, United States
Continental TSIO-520-R6 Engine and Turbo System Firewall FWD!! 310 H.P., image 1
“Prop strike”
Brand:Continental Manufacturer Part Number:TSIO-520

This is a used Continental TSIO-520-R6 engine that is currently up for auction. S/N of the engine is 230323R

 

  • Total Time SMOH: 831.1 hours (Mountain View Aeromotive 5/04/2004)
  • Engine Total Time: 4361.1 Hours
  • Logs from Aug. 1983 to Feb. 2016
  • Max HP 310 @ 2700 RPM / Rated HP 285 @ 2600 RPM
  • Engine last 100hr inspection: 2/19/2016
  • Removed from Cessna T210N


Last compression results were #1 66/80 #2 60/80 #3 68/80 #4 64/80 #5 70/80 #6 70/80 

This engine was involved in a prop strike resulting in a cracked crankshaft!

What you see in the pictures is what you are getting- Includes:

  • Turbo (Cessna P/N C295001-0101) (Please note the damage to the exhaust piece for turbo)
  • Starter (TCM P/N 646275, 24V)
  • x2 Alternators (Aero Electric 1570213-7)
  • Fuel Injection (RMAA / TCM P/N 634326-4A16)
  • Slick Magnetos M/N 6310
  • Fuel Pump (Teledyne P/N 642650-1)
  • Oil Cooler (Stewart Warner 10634R)
  • Brackett Air Filter M/N BA2410
  • x2 Airborne Vacuum Pumps 216CW
  • Oil Dipstick and Tube

Anything else you see in the pics that I left out is INCLUDED

I will be more than happy to ship this engine to you.  If you are interested in a quote, please email me your zip code and I will get you a quote with Estes Freight or ABF whichever is cheaper.  Should you want to arrange your own freight, you are more than welcome to. We will need a commercial address to ship this item to.

Any questions send me an email and I will get back to you asap.  Do you need some copy's of the logs?  Want more pictures? Let me know and I can email or fax those over to you. I will need a an email address from you to send info.  Good Luck bidding

I sell a lot of aircraft engines on eBay so you can bid with confidence that you are buying from a reputable business rather than someone working out of their garage.  If engine is not how I described it to you than I offer 100% refund. 

I will not end auction early, so please do not ask.  What you see in the pictures is EXACTLY what you are getting.  Need additional pics or have any questions please let me know and I will get back to you ASAP.  Bid with confidence.

 


BMW X1 confirmed for United States

Thu, 02 Jul 2009

One of the worst-kept secrets in the car world has been confirmed: The BMW X1 is coming to the United States in 2011. It likely will come with rear-wheel and all-wheel drive and a variety of gasoline and diesel engines. BMW said it would announce the powertrain specifics closer to the launch as it factors uneven fuel prices in the United States.

Lada XRAY Concept – it’s the Lada Evoque

Thu, 30 Aug 2012

Lada has revealed an appealing looking compact SUV concept at the Moscow Motor Show – the Lada XRAY Concept For those of us who grew up on Lada skips – and even for younger readers who only really know Lada for the Niva 4×4 or the Granta – the appearance of a good-looking Lada Concept - the Lada XRAY – at the Moscow Motor Show is a bit of a surprise. But if we look at who’s behind the XRAY, perhaps we shouldn’t be surprised. Steve Mattin, formerly with Mercedes and Volvo, penned the new Lada, and a very convincing job he’s done.

Webinars: Register now for 16 October 'Autodesk Alias Class-A Surfacing: Accelerating Design Development'

Fri, 27 Sep 2013

Registration is now open for the next Webinar in the Autodesk series, 'Autodesk Alias Class-A Surfacing: Accelerating Design Development', which will take place on 16 October. This webinar will illustrate how using Autodesk Alias for Class-A modeling can deliver value-added business and technical benefits and how it helps OEMs provide seamless end-to-end design development. Topics covered will include: external and internal challenges facing automotive design advantages of Alias for Class-A Surfacing how to adopt Alias skills and workflows This is part of the 2013 series of Autodesk Webinars which includes: Concept modeling for automotive Using the T-rig tool in real life Presenting this Webinar is Simon Alford, technical manager for Majenta Solutions.

2040Parts.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.105 s, 11219 u