Find or Sell any Parts for Your Vehicle in USA

Corolla E11 - Rear Anti Rollbar Links Ends on 2040-parts.com

US $59.00
Location:

Chelm, Poland

Chelm, Poland
Condition:New Manufacturer Part Number:1 Warranty:Yes Placement on Vehicle:Left, Right, Front Part Brand:GT4-RACING.EU


 

REAR ANTI-ROLLBAR LINKS/ENDS (set of 2 for rear of the car)

FOR:

- COROLLA E11 - ALL MODELS


E-mail Print PDF
The design of serial OEM anti-rollbar ends is based on spherical uniballs, so it's the part that will spend rather quickly. Especially on the road with poor quality.
Construction, which we suggest has no disadvantages. Polyurethane, which forms the connecting element silencing is resistant both on road conditions and weather.
Very effectively stifle virtually no vibration wearing.
An additional bonus is the proposed construction of a delicate improve the running characteristics.
Spherical power before moving on stick stabilizer must be quite extended on the one hand, (near the internal curve), and tightly on the other (near the outer curve).
Polyurethane does not give the slack in the proposed construction, and stick stabilizer starts to work immediately.

We give You the highest quality product structure similar to the elements used in car-sports, adapted to the requirements of the average driver and not causing the loss of comfort.
You have to feel it in Your own vehicle!


You can find more informations about this product at www.gt4-racing.eu

GT4 Suspension are made to take full advantage of the special characteristics of polyurethane - its durability, and exceptional friction-absorbing capability - not hitherto attainable with rubber.
Critical crush, pre-load, and location factors are calculated to achieve positive, responsive driver feedback which complements a vehicle's roadholding capability - coupled with ride refinement. Firmness ranges between 75 and 80Shore-A, to best suit the individual application. Sophisticated casting techniques maintain the consistency and accuracy that put GT4 Suspension bushes - and the resultant quality of handling that you'll experience - in a class of their own.


THE KEY IS RESILIENCE
GT4 Suspension polyurethane bushes have a firm rubber-like resilience you can actually feel. They embody the best features of rubber (the elimination of noise, vibration, and harshness) while still retaining the toughness and durability of plastic or metal. Resilience is the secret and the real benefit. GT4 Suspensions are very different from the inferior injection-moulded bushes of limited resilience that others, from time to time, have attempted to market.
GT4 Suspensions bushes are inherently resistant to deterioration and swelling, even when in regular contact with oil, greases, waxes, and most other chemicals. So they will never perish.
GT4 Suspension polyurethane bushes will not roll and peel away like rubber.
GT4 Suspension bushes have the exceptional ability to perform in extreme temperatures, as high as 130°C and as low as minus 60°C.

IMPROVED STABILITY
GT4 Suspension bushes are designed to give improved location at pivot points, helping to stabilise suspension geometry during cornering, braking and acceleration. GT4 Suspension bushes are designed with substantial side location shoulders which eliminate any axial displacement problems. GT4 Suspension bushes have a hardness range of 75 Shore-A, this significantly improves location, with no sacrifice of ride comfort.

REFINEMENT
In racing, where rules allow, and even on the road, bushes with virtually no compliance (such as hard nylatron, needle roller, or rose joints) have been used. This practice can cause serious loss of refinement due to noise transmission into the car, not to mention the extra stress it places on the other components. Even a slight impact might result in a broken or bent suspension arm. GT4 Suspension bushes are a much safer alternative, giving good location, and a degree of protective compliance on impact. In fact, many advantages without the disadvantages. GT4 Suspensions bushes will accommodate wider variations in the production tolerances of the original suspension bush housing than hard nylatron, and require no machining after fitting.

FULL WARRANTY
GT4 Suspension bushes carry 5 YEARS warranty from date of purchase.

By replacing your old car rubber bushes with our polyurethane bushes you will have:
- increased road holding
- better performance
- long life of suspension elements
- increased tyre life
- increased steering response


For anyquestions, please feel free to contact us at: suspension (at) gt4.com.pl

We shipp worldwide.
Combined shipping for multiple items is preffered to save your money.

Thank you
GT4-Racing


2011 Hyundai Santa Fe to join Kia Sorento at Georgia factory

Tue, 31 Aug 2010

Hyundai will launch production of the 2011 Sante Fe on Sept. 27 alongside the 2011 Kia Sorento at the recently opened Kia factory in West Point, Ga. The plant will add a second shift on Oct.

Mazda 2 (2015): first pictures of Mazda's mini

Thu, 17 Jul 2014

By Jed Maxwell First Official Pictures 17 July 2014 05:00 Mazda has unveiled official pictures of its all-new Mazda 2 replacement, due in 2015. Despite being labeled as the ‘Demio’ in the official Japanese pics, Mazda’s small Fiesta rival will continue to be known as the Mazda 2 in Europe - but unlike the last generation it will only be available as a five-door hatchback. Made in Hofu in Japan, the Mazda 2 adopts the firm’s Kodo design language that was first seen on the Mazda 6.

Lexus NX 200t F Sport first look

Fri, 11 Apr 2014

We got an early look at the Lexus NX 200t F Sport in production trim 10 days ahead of its world debut at the Beijing auto show April 20. The luxury compact crossover will also be on display at the New York auto show but only during the public days. The Lexus NX 200t is a slightly less racy looking version of the LF-NX Turbo concept shown at Tokyo.