Find or Sell any Parts for Your Vehicle in USA

Dupli-color Paint Afm0355 Medium Wedgewodd Ford Touch Up Paint Repair Fix Match on 2040-parts.com

Location:

Newark, Ohio, United States

Newark, Ohio, United States
Condition:New UPC:026916037220

Dupli-Color® Scratch Fix All-in-1™ is a premium touch-up paint applicator with an abrasive prep tip, exact-color match paint and clear coat to help you restore that scratch or chip to match your vehicle’s original factory finish. Keep domestic and import cars, trucks, vans and SUV’s looking new longer with Dupli-Color® Scratch Fix All-in-1™. Dupli-Color® is the only brand offering colors tested and approved by vehicle manufacturers to ensure the perfect finish. The abrasive prep tip with it’s beveled fiberglass tip removes loose paint and rust. The one coat prime and paint formula can be applied with the pen tip for fine scratches or the brush for larger chips. Seal it with the included clear coat using the ultra-smooth foam applicator. The easy to use ergonomic design is perfect for automotive enthusiasts and first time DIY’ers alike. Dupli-Color® Scratch Fix All-in-1™ will help you fix it easy and fix it right…in your garage.

  • Exact match touch-up paint
  • Colors tested and approved by vehicle manufacturers
  • Beveled fiberglass prep tip removes loose paint and rust
  • Needle paint tip provides precision and control for a smooth finish
  • Chiseled paint brush for precise application to larger areas
  • Included clear coat with an ultra-smooth foam applicator ideal for an even factory finish



Part Number:AFM0355
Weight:0.14lbs
Notes:Dupli-Color Scratch Fix All-in-1
Auto Paint Type:Basecoat
Binder Type:Acrylic
Color / Finish:MEDIUM WEDGEWOOD
Color Group:Blue 
Combustible:Yes
Dry To Tape:2 Hours
Dry to Handle:40 Minutes
Dry to Re-Coat:No re-coat window
Dry to Touch Time:20 Minutes
Flash Point:36
Number of Coats Recommended:2
Package Contents:1 tube
Application Type:Brush On
Quantity (fl oz):0.5
Shelf Life:48 Months
Solvent Type:Toluene
Tintable:No
UV / Sunlight Resistant:Yes
Units of Measurement:Fluid Ounces
Units of Measurement Quantity:0.5
VOC Regulatory Level (g/l):< 780

Body & Paint for Sale

2014 Corvette Stingray coupe, Z51 details revealed in order guide

Tue, 16 Apr 2013

The 2014 Chevrolet Corvette Stingray won't arrive at select dealer lots until summer, but you can get a jump-start on the ordering process now that the ordering guide has been released at Corvette Blogger. There's a lot of press release-worthy copy in the guide (“sleek, sculpted profile,” “richly appointed interior design”), but there are also plenty of details to whet the appetites of the C7-hungry masses. The guide contains an exhaustive breakdown of what is, and isn't, available on the 1LT, 2LT and 3LT trim levels of both the base Stingray and the Z51 coupe -- including wheel, seating and exterior color options.

Citroen DS2 2012 – the new 2CV

Wed, 25 Nov 2009

The Citroen DS2 - a 21st Century 2CV - will launch in 2012 We had the Citroen C3 Nouveau teased in the run up to this year’s Frankfurt Motor Show in September. By the time we got in to a reveal it had turned in to the Citroen Revolte. As we said at the time, not Revolte as in Revolting but Revolte as in Revolutionary.

Tony Williams-Kenny announced as Design Director, SAIC Motor

Wed, 19 Jan 2011

Tony Williams-Kenny has been announced as the new global Design Director of Chinese automaker, SAIC Motor.  During his previous role as Design Director for SAIC Motor, UK, Williams-Kenny worked on various Roewe products, as well as being responsible for designing a new generation of MG models including the MG3, MG6 and MG Zero – the first concept car from the brand since 1985. When interviewed by CDN last year, we asked him how important design is in the company: "For me it's obvious SAIC gets the need for design and the need for a strong brand design relationship," he answered. "We have a really good review group at senior management level too, who actually want to be involved in design reviews and the decision making process." After gaining an MA in Automotive Design and a BA (Hons) in Transport Design from Coventry University in the UK in 1998, Kenny joined Mitsubishi Europe Design in Trebur, Germany as a designer.