eClutchmaster Stage 4 Miba* Racing Clutch Kit Is a brand new stage 4 Xtreme Duty Racing Pressure Plate With Stage 4. 6 Puck Miba Racing Disc Setup can hold and 70% more pressure increase over stock. eClutchmaster Stage 4 Miba* 6 Puck Miba* Solid Rigid Racing Disc. A Miba* Composit Disc is a best material for friction material in the clutch market.

If you want the best the industry has to offer, ask for eClutchmaster 6 Puck Miba* Racing Disc. The eClutchmaster Racing 6 Puck Miba* Disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced Miba Delivering Aggressive Bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, The eClutchmaster Racing 6 Puck Miba Strip Disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality 'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. Lastly, resurface and rebalance the flywheel prior to installation for best performance and result.

Street Or Long Life Of Clutch Break-In Required.

Features Of eClutchmaster; Stage 4 Miba* Racing Clutch System

1. Heavy Duty Stage 4 Heavy duty racing pressure plate


2. Hi-Leverage Design


3. Precision heat treated single diaphragm


4. Re-Arched Diaphragm for Superior Engagement


5. High clamping force


6. NO unnecessary increase in pedal pressure


7. 6-Wings Ceramic Button Disc


8. More Grip Power, longer lasting

Why Miba?

• High Temperature Resistance: Up To 930°F (500°C), Short Time Up To 1650°F (900°C)

• Very Smooth Engagement

• High Wear Resistance

• High And Stable Level Of Friction Coefficient

• Negligible Mating Material Wear.

• Miba Generates 3 To 15% Lower Torque Peaks Compared To The Competition; Reduces Gear Shocks Loads And Same Material As Using Aircraft Brakes.

Miba Friction Group Has Been A Development Partner And Supplier Of High-Performance Friction Materials To The Automotive And Machine Industry For Over 30 Years. We Offer Optimized Components For Clutches, And Use High-Quality Materials And Innovative, Technologically Advanced, Processes To Ensure Excellent Wear-Resistance And Friction Coefficients.Clutch Segments Generate The Friction Needed For Torque Transfer From Engine To Transmission, Enabling The Vehicle To Start. They Are Characterized By Particularly High Temperature Resistance And Low Wear.Friction Materials Are An Important Performance Element In Vehicle And Machine Clutches, And Play A Key Role In Overall Efficiency.

This Racing Clutch and Lightweight racing flywheels (if purchased), which are designed and manufactured to increase capacity for higher output and to improve clutch response, may cause the transmission or bearings to make a rumbling noise which is not present when using the original OEM production parts. Such noise is particularly likely to occur when idling or when accelerating and decelerating at around 2000 rpm. Please be aware that this rumbling is not due to any defect in the parts. Do not use the eCLUTCHMASTER Clutch or Flywheel with a Big Operating Cylinder. This can result in blocking proper disengagemnt of the gears because of insufficient stroke volume.

If you see prices way less than others than competitors that means what you get is what you pay for- Made where country with low labor with low craftsmanship with poor materials.

COMPONENTS:

• eCLUTCHMASTER HEAVY DUTY STAGE 4 CLUTCH PRESSURE PLATE COVER (2100LBS CLAMPING LOAD)


• eCLUTCHMASTER STAGE 4 6 PUCK COPPER CERAMIC MIBA SOLID RACING DISC


• eCLUTCHMASTER THRUST THROWOUT RELEASE BEARING


• PILOT BEARING


• ALIGNMENT TOOL

APPLICATION:

• 1993-1997 FORD PROBE GT 2.5L 6CYL DOHC GT SE

Item specification


• Brand : eCLUTCHMASTER


• Manufacture Part Number : EC-53122HP4-SOL-EXE-PRO25


• Surface Finish : CAST IRON COPPER CERAMIC MIBA


• Torque : 329Lb/Ft


• Horse Power : 349Hp


• Warranty : Yes


• Country of Manufacture : United States



**FILE PICTURES ARE FOR REFERENCE ONLY. ACTUAL ITEM MAY VARIES**