Ford 9 Inch Big Bearing Housing With Latter Bars 1957-1959 Ford Station Wagon on 2040-parts.com
Vancouver, Washington, US
This no reserve action is for a ford 9 inch rear end big bearing housing only .1957 1958 1959 found in ford station wagons.I have one in my 68 amc javelin and it bolted in and hooked up to drive line and e brakes with out any modifications, it was 53 and 1/4 inches from outer flange to flange. This is 1 inch shorter and is 52 and a long 1/4 inch from flange to flange. I was told that it was in a chev camaro or Vega 8 second race car. It does have the brackets for latter bars but they could be removed. They use these for early mustang also.I know they get $350-$400 in stock condition so that is where i am going to start bidding at. I am sure it would cost at least $200-$300 more to add the latter bars to it. You got to know how hard these are to find in any condition. See pictures. Rare vintage ' Should fit mustang cougar cyclone comet galaxie and trucks in years 1960-1980? Do your home work!I am not an expert on these 40 year old parts but try to describe the best i can. If you have QUESTIONS ASK BEFORE BIDDING! This is not a brand new part so if that is what your looking for DO NOT BID ON IT! I reserve the right to end. the action at any time because it is for sale locally. If you have questions call before you bid. This as most factory parts warranty expired over 39 years ago Do not think it has been extended by them or me..This is as is where is !No warranted or return.
If you plan on
waiting any more than 1-3 days to pay and i haven't agreed to that before you bid then don't bid. I am not a bank
and this is like safe way when you buy something you pay for it. If not
paid by 5 days i will leave you bad feed back and put you on my no
bidders list. I have recently had a few non payers and this doesn't give
the guy that really wanted to buy and pay in a timely manor the chance
to buy the very rare parts i sell. THIS IS A PICKUP ITEM ONLY DUE TO TIME AND COST OF SHIPPING AND THE 17% FEE EBAY AND PAY PAL CHARGE ON SHIPPING COST! IF YOU WANT TO SET UP SHIPPING ON YOUR OWN I WILL MAKE MYSELF AVAILABLE FOR THEM TO PICK IT UP. ANY BOXING OR TIME SPENT FOR ME TO DELIVER WILL BE PAID BY BUYER AT $25.00 AN HOUR PLUS COST.IE BOX TAPE FUEL AND TIME. OTHER WISE PICK UP ONLY! I do ship with conformation and insurance to the lower 48 states unless pre approved as to costs and conditions before you bid, if you think my shipping is to high don't bid or plan on flying out and doing it yourself which works for me.I just sold items last week and my cost because pay pal and eBay charge a fee on shipping that i don't get to keep was near 17 %. Add that along with tape box time and fuel to go to the post office and you might think my shipping is cheep. If you leave me bad feed back for shipping i will put you on my no bidders list and maybe you can find the rare parts i sell somewhere else or someone else to work for free. I will ship with the fastest way that fits in what you paid when possible. We all know we are guessing where the buyer is located so as to cost we are guessing. I have lost $60.00 for shipping recently on a pair of heads so i don't always come out ahead. Call.Garry 360-921-0446. SHIPPING!!!!! If you or your mom owns a
shipping company or have a
account you are welcome to send me a shipping slip and make arrangements
to have it picked up at my house. I will not box it and you shipper
will be responsible for that also. I will not take payment threw pay pal
for fear that it will get there damaged!When you go to the post office
to send the shipping slip you can get a check for me there.
The normal
shipping cost
include care and time and material to prevent that. If you don't want to
pay for that i am good with that and always welcome free local pick
up. Shipping is always an issue but i don't control what they charge me
or do i do enough business for them to let me have an account. If you
can negotiate a lower price with them then do so.It seams to me that
buyer that question my shipping cost first never leave there zip code
and in more cases it is more than what i am offering! Keep in mind if
indeed it is more that will be the amount you will pay! see larger pictures below
Universal Joints & Driveshafts for Sale
- Rear bumper guards for mercedes benz 300sl gull wing(US $695.00)
- New bmw drive shaft hanger apa/uro parts center support bearing 26 12 7 526 632(US $43.40)
- Gmb 260-0782 centering yoke kit(US $44.32)
- Gmb 240-0356 rear joint(US $23.33)
- Dorman 614-316 cv boot(US $26.77)
- Beck/arnley 103-2223 flex joint(US $63.88)
Mercedes-Benz replaces CLK with E-class coupe
Tue, 17 Feb 2009After a 12-year run and more than 460,000 sales across two generations, Mercedes-Benz has replaced the CLK with the 2010 E-class coupe. Debuting at next month's Geneva motor show and with U.S. sales slated to begin in June, the upmarket two-door represents a departure from its predecessor not only in name but also on a technical basis, switching from the old C-class platform to a modified version of the structure that underpins the recently revealed E-class sedan.
Concept Car of the Week: Pininfarina Peugette (1976)
Fri, 20 Jun 2014Unveiled in 1972, the Peugeot 104 was a compact car with a simple and honest design by Paolo Martin. The most powerful ZS model was more of a warm hatch than a hot one, but it did feature a 1124cc engine with 66bhp. Thanks to the car's weight of only 760kg, the car could reach speeds of up to 100mph - terrifying in a 104.
Buy a Spyker Bond and get a cheap Spyker B6 Venator
Mon, 10 Mar 2014Buy a Spyker Bond and get a cheap B6 Venator (pictured) Last year, Victor Muller seemed to have pulled off something of a coup for Spyker by delivering concepts of the B6 Venator Coupe and Spyder to much acclaim, which looked like a car that could kick-start Spyker’s rather troubled business model. After a foray in to Saab ownership, Victor Muller lost Spyker to CPP, but CPP’s reliance on finance from Victor’s pal Vlad the banker proved to be CPP’s downfall and Victor emerged, somehow, back in control of Spyker. But despite Victor’s legendary ability to schmooze finance from the most unlikely sources, it seems he’s run in to a bit of trouble with financing production of the Venator, so he’s come up with a plan that looks to be a cross between a lottery and crowd funding.