Find or Sell any Parts for Your Vehicle in USA

Holley # 300-129bk Mid-rise Intake Gm/chevy Ls3/l92 on 2040-parts.com

US $299.95
Location:

North Port, Florida, United States

North Port, Florida, United States
Condition:New Brand:Holley Warranty:Yes Manufacturer Part Number:300-129BK Country/Region of Manufacture:United States UPC:090127715888

Part Detail:

You are buying a brand new Holley # 300-129BK Aluminum Intake Manifold. Bolt a carburetor onto your LS engine using one of these Holley LS mid-rise carbureted intake manifolds. Holley LS mid-rise carbureted intake manifolds work on all GM LS, Gen III, or Gen IV engines equipped with rectangular or cathedral port cylinder heads. Available in a single or dual plane design, these manifolds use an O-ring cylinder head mounting flange to provide an OEM seal and make installation a snap. You'll also receive mounting bolts, washers, and pipe plugs for the manifold vacuum and MAP sensor ports.

Application:

- All GM LS Gen III or IV engines equipped with LS3/LS92 style rectangular port cylinder heads

Specifications:

Brand
Holley
Construction
Cast
Emission Code
3
Engine
GM LS3/L92
Finish
Satin
Front Height
5.07 inch
Fuel System Type
Carb
Manifold Type
Mid Rise
Product Type
Manifold
Rear Height
6.14 inch
RPM Power Band
1500-6500

Notes:

Fits all GM LS Gen III or IV engines equipped with LS3/LS92 style rectangular port cylinder heads. Includes mounting bolts & washers as well as pipe plugs for Manifold vacuum and MAP sensor ports.  

NOTE: These Dual-Plane Intake Manifolds are NOT legal for sale or use on engines with pollution controlled equipment.

Features:

    • 1500-6500 RPM power band
    • 4150 square bore carb mounting flange
    • Optimized runner layout and constant cross sectional area provide a broad torque curve
    • Minimum carb flange height means it fits in vehicles with minimal or no hood modifications
    • Great for carbureted or throttle body EFI street applications
    • Cast aluminum construction and efficient casting design for light weight, consistent wall thicknesses and improved casting quality
    • Weighs 14.56 lbs.
    • Height (front) - 5.07" from front lifter valley cover to carb mounting flange
    • Height (rear) - 6.14" from rear lifter valley cover to carb mounting flange
    • Port size - 2.454" height x 1.09" wide
    • Mounting flange gasket type - O-ring
    • Includes Viton® O-rings - Viton® is a registered trademark of DuPont Performance Elastomers

Rebel Performance is an authorized Holley Performance dealer. Make sure to checkout Rebel Performance for all your Aftermarket Performance Automotive needs!

Shipping Policy:

Most items ship within 1 business day of purchase. Some item are shipped directly from the manufacturer and handling time vary depending on the manufacturer. Please check with us before purchasing with any availability questions.

Lower 48 States:

The listed fixed price shipping is to the lower 48 states only. Shipping to all other destinations will have additional shipping costs.

International Shipments:

All item are setup to be shipped using eBay's Global Shipping Program. If you are having a problem getting a International Shipping quote, please contact us for help.

Returns & Refunds:

All returns must be shipped back via eBay's Return Program, all other returns will not be accepted & processed. Purchaser will be responsible for Return Shipping Charges & 20% Restocking Fee. If you ordered the item incorrectly & would like to exchange it for the correct item, please contact us directly to set that up. Purchaser will be reponsible for all shipping charges incurred in the exchange process.

Terms & Conditions:

If you have any questions, please contact us before purchasing. If you have any doubt about our products or do not agree with our policies, please do not make a purchase. Please read the following rules carefully, if you place an order,then you agree with the following conditions. Thank you!
  • Please read Item description carefully to make sure the product is correct before purchasing. 
  • Check your vehicle details properly, and make sure they match the item description or fitment. 
  • We are not responsible for non-fitment due to modifications done to your vehicle.
  • We do not take any responsibility for incorrect installation or the damage done by it. 
  • We do not manufacture parts, we distribute them. Any flaws found in product are the responsibility of the manufacturer.
  • We will check every part for major flaws before shipment, but minor flaws are inevitable.
  • Items may be shipped directly from the manufacturer; but we still assure prompt shipment or your money back.

Intake Manifold for Sale

New Ford Mustang: First right-hand-drive Mustang built

Mon, 18 Aug 2014

New Ford Mustang: First right-hand-drive Mustang built The new Ford Mustang, unlike Mustangs in the past, will be sold in the UK in right-hand-drive (and in other RHD markets too), and that has now got closer with the reveal of the first RHD Mustang (above) to roll out of a Ford production plant. Ford has already taken orders for the first 130 UK spec RHD Mustangs during the UEFA Champions League final back in May, when 500 new Mustangs were offered as a high-profile way to kick off sales of the new Mustang in Europe. The Mustang is available for the UK in RHD as either a Fastback or Convertible and a choice of either a 420bhp V8 or 2.3 litre EcoBoost with 324bhp, with a standard spec that includes Ford’s SYNC 2, Park Assist, Leather and 19″ alloys.

Keating SKR and TKR (2008): first official pictures

Wed, 23 Apr 2008

By Ben Pulman First Official Pictures 23 April 2008 08:30 A British Bugatti costing £90,000? Or another loopy sports car from Lancashire? The Keating SKR and TKR launched today have 1500bhp potential and top speeds that challenge the Veyron's - but it's difficult to dispel our innate cynicism about yet another new British supercar manufacturer.

Grab the sunscreen for those summer drives

Thu, 16 Jun 2011

You can get sunburned while driving a convertible, but driving with the top up can also result in sun damage to the skin. New research from the University of Washington suggests that people in the United States are more likely to develop skin cancer, such as melanoma and merkel-cell carcinoma, on the left side of their bodies, likely as a result of the fact that the left arm receives more ultraviolet rays while driving. Studies by the Journal of the American Academy of Dermatology show that, when skin cancer shows up on one side of the body, 52 percent of melanoma cases and 53 percent of merkel-cell carcinomas occur on the left.