Find or Sell any Parts for Your Vehicle in USA

Holset Hx40 H1e Turbocharger Turbine Housing T3 4 Bolt Outlet .63 A/r on 2040-parts.com

US $185.00
Location:

Falls Church, Virginia, US

Falls Church, Virginia, US
Returns Accepted:ReturnsNotAccepted Manufacturer Part Number:Tim's Turbos Warranty:Yes

Holset HX40  Turbine Housing T3 4 bolt  Outlet

Yes, this uses the 6 bolt clamps. The bearing pocket is for  the stock holset.

 

Here is what everyone is been looking for.  Now we offer a bolt on turbine housing for the Holset HX40. These are some of the fastest spooling turbos. Never offered before is a T3 version single high flow volute.  With the original Garret bolt pattern ( 4 Bolt Outlet down pipe). If your turbo kit set up already has a T3 4 bolt, Now you can adapt new technology to that old kit. We offer  this housing for The Borg Warner  S200's, Garrett T31, Garrett  P trim, Holset HX35, and Hx40. These turbine housing are selling very fast..

The HX40 turbine hsg is  casted for the 76mm inducer and 64mm exducer wheel. If you are looking for more flow we also offer our own stage 3 turbine wheels for the HX35 and HX40. Or we can Clip your turbine wheels.

Ask about:

AN fittings for holset turbos

Gaskets

Clamp/Bolt kits

 

 

Tim's Turbos.com


On Sep-28-11 at 09:57:06 PDT, seller added the following information:

We will not ba able to ship any turbine hsg's between 9/28/11 and 9/31/11


On Nov-01-11 at 08:39:44 PDT, seller added the following information:

As a response to many questions... Here are some answers... The .63 A/R is about an 8 cm2 turbine housing. The HX35 tubrine hsg is casted for the 69.5mm inducer and 60mm exducer. The HX40 turbine hsg is also casted for the 76mm inducer and 64mm exducer wheel. If you are looking for more flow we also offer our own stage 3 turbine wheels for the HX35 and HX40. Does the 2.5in outlet choke the flow.... No, both the HX35 and hx40 have the same or smaller exducer turbine wheels. So, there is no restriction at all. My company backs up and test all products sold. A one year warrant comes with everything we sell. As well as our turbocharger rebuilding. Hope this info helps. Please ask as many questions as you like. We are a turbocharger Specialist.

Turbo Chargers & Parts for Sale

Chrysler, Nissan, GM set pace as industry's September volume advances 10 percent

Mon, 03 Oct 2011

UPDATED--U.S. auto sales--helped by big gains at Chrysler, Nissan and General Motors--overcame widespread economic jitters to rise 10 percent in September, raising hopes the industry's recovery will accelerate in coming months. It was the biggest increase in light vehicle sales since April, when surging gas prices and Japan's earthquake started to put a dent in demand.

Nissan's DeltaWing goes for a ride at Sebring

Mon, 19 Mar 2012

The Nissan-powered DeltaWing race car was on-hand for a few laps at Sebring this weekend, and the funky-looking speedster made it around the 3.7-mile track without incident. Granted, it was at about half race speed, but it was good to see the Nissan out on four wheels— narrow as some of those wheels might be. The DeltaWing sports a direct-injection, 1.6-liter turbocharged Nissan engine making about 300 hp.

Kia Soul Shaker returns & Kia Picanto White arrives

Sat, 26 Jan 2013

Kia is reintroducing the Soul Shaker to its Shaker Originals range and launching a range-topping Kia Picanto White. With metal to shift, economic gloom and snow on the ground, car makers turn to new variations on existing models to get bit more footfall – and sales – at their dealers. So Kia is reintroducing the Soul Shaker to its Originals offerings (along with the Soul Quantum and Soul Inferno) to sit at the top of the Soul range with its Vanilla Shake paint job (or, as a no cost option, Quartz Black), 18″ alloys, Houndstooth upholstery with beige trim and a rear-view mirror that comes with a built-in reversing camera.