Find or Sell any Parts for Your Vehicle in USA

Jaguar E-type, Xke Bulkhead, Pedal Box Top Section - 4.2 - Rh on 2040-parts.com

US $125.00
Location:

Elkton, Maryland, US

Elkton, Maryland, US
Returns Accepted:Returns Accepted Item must be returned within:14 Days Refund will be given as:Money Back Return policy details:Satisfaction 100% GUARANTEED! Return shipping will be paid by:Buyer Restocking Fee:No Warranty:Yes Part Brand:Monocoque Metalworks

Jaguar E-Type - Series 1, 1.5, & 2 - RH 4.2 Bulkhead Pedal Box Top Section

This is one RH top section for the bulkhead of MOST 4.2-liter E-Types.  It fits MOST Series 1, 1.5, and 2 Coupes (FHC), Roadsters (OTS), and 2+2's - the exception being 1965 cars which have the 3.8-style bulkhead and the "crossover" pedal box - for those cars, use the 3.8-style of this panel - also available...  The panel is delivered in fresh, bare steel, ready for the quality primer and paint of your choice - you will not have to spend time stripping off the low-quality, black "shipping primer" that some other manufacturers use...

This panel can be used to allow a 4.2 servo-style brake pedal box to be used on a 3.8 car!  Or - use it to replace a rusted or mangled piece in a tired shell.  Either way, this panel is an EXACT reproduction of the original piece - all holes, bends, and cutouts are EXACT! 

           Note:  There is a heavier support member under this piece and spot-welded to it.  If you are using this piece to repair a rusted panel, then that support piece is usually OK and salvageable.  If you are using this piece to convert a shell from a 3.8 to 4.2 configuration, contact us for availability of the support member as well.

              Satisfaction 100% GUARANTEED! – All Monocoque Metalworks panels are guaranteed to be manufactured correctly, fit properly, and be suitable for a 100-point concours restoration.

Google Us - our project blogs contain over 6,000 photos of E-Type shells and bonnets being restored in our shop!

  See our other auctions for other panels for your E-Type restoration!

We also have the LH side, of course - contact us!

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

MONOCOQUE METALWORKS

 

            Monocoque Metalworks  is a fabrication shop located in Northeastern Maryland that specializes in Jaguar E-Type (XKE) body shell restoration.  If you are restoring your E-Type, the best place to start is a rock-solid bodyshell (or tub), and we can help!  We offer services ranging from the fabrication of a single panel to the construction of an entirely NEW bodyshell!

 

            FABRICATION AND SHIPPING OF ORIGINAL OR CUSTOM BODY PANELS – we have patterns and examples of nearly every E-Type panel and can fabricate any panel you need for your restoration.  Before you spend hundreds (or thousands) of dollars on Martin Robey panels that may or may not fit properly, give us a try!  OR, call us as the ONLY supplier of many of the smaller, internal panels that Martin Robey doesn’t supply (or lists in their catalog but don’t actually produce…)  Want some extra holes punched? – or some original holes not included? – or the panel produced in a heavier gauge? - no problem!

 

            COMPLETE RESTORATION OF YOUR TUB – we will take in your monocoque bodyshell, strip it down to bare metal, and replace all damaged or rusted panels using the proper techniques.  Your shell will be returned to you in primer, dead straight, rock-solid, safe, and EXACTLY as it left the factory.

 

            TUB EXCHANGE – looking to save time?  Exchange your existing monocoque bodyshell for one of our already restored shells (subject to availability).  You’ll arrive at the shop, unload your shell, and load up a completely restored, PERFECT shell and be back on your way in a few hours!  With this service, we can cut your project time down by YEARS!  Plus, you can exchange one body style for another – drop off a Coupe or 2+2 shell and take home a roadster!

 

            TUB MODIFICATION – we can “beef up” your tub with heavier gauge components for vintage racing, or add complete sub-frames, roll bars or cages.  If you can imagine it, we can fabricate it!

 

            FABRICATION OF AN ENTIRELY NEW TUB – we can build you an entire floor assembly with sills, gussets, tunnel, etc. – a complete cowl/firewall assembly – or an entirely NEW bodyshell!

 

            COMPONENT RESTORATION – We will happily restore any piece you care to ship us and return it to you in as-new condition.  This includes, but is not limited to: bonnet components, heaters, door shells, decklids, coupe hatches, etc.

 

            E-Type restoration is a labor of love at Monocoque Metalworks!  The shop is outfitted with INDUSTRIAL GRADE MACHINES – many of which are vintage machines themselves – carefully restored and modified with the correct tooling to produce perfect E-Type panels.  As a result, you will be amazed by the crisp cuts, straight bends, and perfect holes found on our panels!  We have forming capabilities that include shearing, braking, rolling, wire-edging, bead-rolling, notching and punching – in aluminum, steel, or stainless steel - up to and including 16-gauge (.060) or beyond.  We utilize a combination of MIG, TIG, Spot, and Plug welding to ensure that your car is assembled with factory-like originality, coupled with strength and safety you can depend on!

 

            Over 25 years of automotive restoration experience, specializing in E-Types.  My first car was a 3.8 roadster, and I have driven, raced, wrecked, and restored these cars ever since.  I know the cars intimately, and can provide references attesting to that fact.  However, restoring the E-Type’s monocoque shell has always been my true passion!  Let me indulge myself on your project – you will not find a more experienced and enthusiastic partner for your restoration!

 

            BOOK NOW!  We are booking shell restorations continuously - so don't wait to call, lock in your spot now!  I have restorable Series 1 Coupe and 2+2 tubs with straight roofs and quarters in stock, and can supply roadsters as well - plus a large selection of doors, decklids, hatches, hinges, bonnet pieces, etc.  And you don't have to wait until your car is all stripped down – call now and we’ll start building a solid tub TODAY and exchange it for yours later this year!

                 

            Located just outside of Newark, DE, with easy access to I-95.  No job is too big or too small!  Give us a ring and let’s discuss your project – whether it’s one panel or the restoration of an entire body shell, we can handle it – with the attention to detail and ENTHUSIASM you’re looking for!

 

 

Monocoque Metalworks - (443) 907-2287 - Chuck

 

Google us for more info!

 

References available – or come visit the shop and I’ll show you our tools and skills in action! 

Hyundai will launch Veloster Turbo in 2012

Mon, 07 Nov 2011

Hyundai has confirmed it will bring a 1.6 turbo version of the Veloster coupe to the UK in the second half of 2012, as first revealed by CAR. It should make an interesting alternative to the VW Golf GTI brigade. The new blown four-cylinder engine is called the Gamma 1.6 T-GDI by Hyundai - and it develops an unusually high specific output of 201bhp at 6000rpm and 196lb ft at just 1750rpm.

Mitsubishi Evo X 2010 Updates

Fri, 09 Oct 2009

The Mitsubishi Evo X has been updated for 2010 in Japan But these updates to the Evo X are so small and insignificant they hardly constitute an update at all. Mitsubishi has added slightly beefier side skirts and lower weight plastics for the front. Lower by all of 3.5 lbs.

Audi A5 gets new TDIe engines & SE Technik spec

Fri, 03 Feb 2012

Audi A5 TDIe offers more efficient engines in Sportback & Coupe Audi has made the A5 Coupe and Sportback even more efficient with two new TDIe engines and SE Technik specification option. We’ve only just reported the powerful BiTurbo 3.0 litre diesel engines for the Audi A6 and A7, and now we get news from Audi of diesel engines at the other end of the spectrum with new, more efficient TDIe engines for the Audi A5 Coupe and A5 Sportback. The new efficient TDIe engines come in either a 136PS or 163PS versions, with fuel economy as impressive as 64.2mpg in the A5 Sportback 2.0 TDIe 136PS.