Kolossus Flex 1/0 Gauge Power Amp Install Kit
Kolossus Fleks 0 Gauge Power Amp Installation Kit. This kit is designed
to be a base for installation of a large, high current audio system.
Once again KnuKonceptz includes additional 0 gauge ground wire to allow
for Battery to Chassis Ground.
KnuKonceptz KFX amp installation kit features our oversized Oxygen Free Copper (OFC) Kolossus Flex Cable with ultra flex jacket- Included with our kit is your choice of fuse size (60/80/100/120/150/200/250A/300A - Please note fuse size with payment - 300A will come if no other size noted). The FH-20 Inline fuse holder does not come installed within the cable, this allows the installer to place the inline fuse holder in an optimum location during installation. It also allows the installer to extend the power wire 1-3' by using the inline fuse holder to add cable to the main run (leaving the 18' as one unit and using the FH-20 to "splice" a few feet of wire)
Additional Speaker Wire and RCA's will be required to complete your installation.
Specifications
KnuKonceptz KFX 0 Gauge Power Amp Kit includes:
-18 Feet 0 Gauge Blue Kolossus Flex Power Wire
-5 Feet 0 Gauge Smoke Kolossus Fleks Ground Wire
-1 waterproof inline fuse holder with your choice of one ANL fuse fuse- 60/80/100/120/150/200/250/300A
-3 Black / 1 Red 0 Gauge ring terminals
-5 feet Split Loom and wire ties
Kolossus Fleks Kable 1/0 Gauge Spec:
Kolossus Fleks Power / Ground Wire consists of 5145 Strands of tinned Oxygen Free Copper making it marine grade power wire
-Maximum load @ 20 feet - 375A
-Outer diameter - 16mm, Conductor diameter ~12mm (2mm thick jacket surrounding conductor)
Product FAQ
How many watts can this amp kit handle?
At KnuKonceptz, we do not use "watts" to rate our amp kits. This is a very inaccurate method to determine what the proper gauge wire required for your amp installation. There are many amp manufactures and not all of them represent the output of their product accurately. Please refer to your amplifier's fuse rating, this is a number a manufacture can not fake, well they could but it would put their product in harms way! Add up the fuses on the end of both of your amp (ex Amp A has three 40A fuses = 120A draw; Amp B has two 30A fuse = 60A Draw; 180A system total draw) If this number is under 300A, this kit will fit your application.
How do I determine what size fuses I need for the inline fuse holder?
Using the information from the answer above, the example system draw totals 180A therefore a 200A fuse is the minimum required and the safest option for the inline fuse holder
Why should I upgrade the car's factory battery to chassis ground under the hood?
Your vehicle's wiring was engineered to work with the factory electrical
load. By adding a massive current drawing load requiring a heavy 0
gauge power wire, you also need to upgrade the vehicle's ground wire.
This kit includes the appropriate parts to complete this upgrade. The 5'
section of ground should be cut one time (to make two sections). These
do not need to be even length, but rather cut to fit your installation's
need. You may only need 18" to connect the battery to your vehicles
chassis. The remaining 0 gauge ground wire is then used to connect the
audio amplifier to your car's chassis.
Can I alter this kit in any way before purchasing?
Our amp kits are made in large batches to reduce cost, which is passed onto you. We can not alter them in any way. Should you need to make alterations, you would have to purchase the items individually from our shopping cart.
Additional Images
What do we mean by "Oversized"? Below on the left is Stinger PRO 1666 strand 4 Gauge (Black) and our KLMX 4 Gauge (silver pearl - same conductor as KCA, different jacket) - pretty substantial difference in the two cables......Ask other sellers for cross sectional images of their cable...they wont reply....