Find or Sell any Parts for Your Vehicle in USA

Mercruiser Engine 350 Marine Chevy Gm Motor Pre. 1985 2 Piece Rear Main Seal on 2040-parts.com

US $1,500.00
Location:

Hollywood, Florida, United States

Hollywood, Florida, United States
Condition:New other (see details)

      This is a 1970 to 1985 Mercruiser  ENGINE, small block 350 5.7 LONG BLOCK (with heads) Mercruiser TRUE  marine engine 2 piece rear main seal ,completely remanufactured (0 hours) .This is the perfect replacement for a 305 or 350 from 1970 to 1985 two piece rear main seal engines .Get more compression for $50 more.Get more lift and duration for $185 more (look at our other auctions).Also 4 bolt main only $100 more.We have been specializing in marine engines for over 18 years (look at my feedback). Here at RapidoMarine.com we have NO CORE CHARGE on all engines that are shipped anywhere(local engines do not apply).The reason for this is that none of our engines have any water damage(you can sell yours cutting your cost on ours). This motor will work with all MerCruiser, OMC, Volvo Penta, Pleasure Craft, Crusader and Chris Craft, V-8 Chevy powered engines. This engine was professionally re manufactured by RapidoMarine.com, and comes with a "ONE YEAR WARRANTY"(something goes wrong, you get a new one.). Click here to see the RapidoMarine.com Warranty . Precision Machining Processes: First the block gets baked at an extremely high temperature to burn off all impurities(including paint),and gets cooled rapidly to harden the steel.Then it gets “machine blasted”(similar to sand blasting) , gets pressure tested,magnefluxed,and checked for cracks.The engine is now put in a pressure washer and is cleaned with special acids.At this point the block gets painted with heat resistant engine paint in its appropriate color(custom colors also available). Engine block cylinder walls are bored and power honed, cylinder head mating surface and block mating surface are machined, engine block is line honed,crankshaft is magnafluxed, turned (max .010) and polished, connecting rods are resized and balanced in sets.  New sealed Power pistons w/pins, sealed Moly Power piston rings, Clevite high performance main, rod, and cam bearings etc.. New heavy duty timing chain & gears, new high volume Melling oil pump, new lifters, and all new BRASS freeze plugs.. During assembly the engine is double checked for such things as rod and main clearance etc. Comes with all FELPRO gaskets and seals needed for installation. All your existing parts will bolt right in (oil pan, manifolds,starters etc).All rods, rockers, and lifters ,and heads come fully installed. ALL INTERNAL PARTS ARE NEW.This engine is freshly built and has NEVER been installed or run. With our guarantee you can't go wrong. Marine shoppers, make sure you are getting a true marine engine (not just brass plugs).Engines take approx 5 days .Shipping is approx. $150.If more we pay up to $50 on your behalf. We will also provide and pay insurance for the total amount of your purchase (beat that).If you are new to ebay, have 3 or less feedback, have negative feedback,or if you have changed your identity within the last 30 days, please email us before bidding. Thanks and happy bidding .

WE INSTALL for $1485

Call any time RUN-663-FAST or 786-663-3278

visit:  RapidoMarine.com

Click on an image to see a larger version



Click here to see the RapidO Warranty 

After purchasing, pay instantly with your credit card through PayPal!

Toyota FCV Has Passed its Most Important Stage Yet

Sat, 13 Sep 2014 00:00:00 -0700

Toyota FCV (pictured) moves closer to production With anticipation and excitement growing stronger and stronger for the Toyota FCV’s release, we are now one step closer to seeing it on the road with Toyota gaining the government’s approval status for them to build and inspect manufactured hydrogen tanks that carry high amounts of pressure. This has been a large hurdle in Toyota’s race to produce the world’s first road legal hydrogen powered vehicle due to the strict Japanese laws that outline all pressurised gas containers should be type-certified and should be available at all times to inspect for an official safety inspection throughout the manufacturing process. Now that Toyota have been given the go ahead, this boost in plans means that they can now ramp up the production of hydrogen tanks that can store hydrogen fuel at 70mpa (700bar) pressure.

Peugeot 308 GTi for Europe but not for UK – sort of

Thu, 20 May 2010 00:00:00 -0700

The Peugeot 308 GTi – but only for Europe Well there’s a headline that will need some explaining. But let’s start with the easy bit – Peugeot is launching the Peugeot 308 GTi in to the European market. Which is nice and straightforward.

1937 Horch 853 wins Best of Show at Pebble Beach Concours d'Elegance

Mon, 17 Aug 2009 00:00:00 -0700

The buzz started as soon as the Horch rolled up to the line Thursday morning for The Tour, a drive around the Monterey Penninsula for cars entered in Sunday's Pebble Beach concours. "Did you see the Horch," people asked each other. "Did you see those fenders?