Find or Sell any Parts for Your Vehicle in USA

Mopar Dodge 340 - 430 Horse Complete Crate Engine/pro-built/ 360 318 273 New Sbm on 2040-parts.com

US $7,790.00
Location:

Wittmann, Arizona, US

Wittmann, Arizona, US
Returns Accepted:ReturnsNotAccepted Warranty:Yes Part Brand:MOPAR / DODGE / PLYMOUTH / CHRYSLER

MARK'S PERFORMANCE ENGINES

*************************************

WORLDWIDE SHIPPING AVAILABLE

*************************************

SMALL BLOCK MOPAR 340 CID / 430 HORSEPOWER COMPLETE STREET / STRIP CRATE MOTOR!!

***  2 YEAR / UNLIMITED MILE WRITTEN WARRANTY  ***

SUPER RARE / HARD TO FIND MOPAR 340

* LOOKS "STOCK", BUT WILL RUN MUCH STRONGER!

340 CUBIC INCHES OF MOPAR STREET / STRIP THUNDER!!

** "BUY BEFORE END OF AUCTION SPECIAL"!!! (HURRY!!!  SEE DETAILS BELOW)!!!

THE LEGENDARY MOPAR 340 IS TRULY A GIANT KILLER AS THEY "RAP" (REV UP) SO QUICKLY DUE TO THEIR BIG BORE & SUPER BORE/STROKE RATIO, SUPER ROD/STROKE RATIO, LIGHTWEIGHT PISTONS, & SHORT STROKE!  THE POWER IS RIGHT THERE WHEN YOU HIT THE GAS ON ONE OF THESE!  MANY BIG BLOCK CHEVYS, FORD BOSS 302'S, SMALL BLOCK CHEVYS, SMALL & BIG BLOCK FORDS (AND THE LIST GOES ON) HAVE BEEN HUMBLED BY A MIGHTY MOPAR 340 STREET/STRIP SCREAMER THAT WAS JUST IN "STOCK" FORM!  COMMON KNOWLEDGE IN THE MOPAR WORLD!  THIS MOTOR IS MUCH BETTER THAN "STOCK"!  SO CONSIDER HOW IT WOULD RUN IN YOUR CAR!

TRULY AN AWESOME MOTOR TO PUT IN YOUR NUMBERS MATCHING MOPAR RESTORATION PROJECT OR STREET/STRIP HOTROD!!  IT LOOKS "STOCK", BUT RUNS MUCH STRONGER!  

MASSIVE PRICE DROP (OFF OUR REGULAR NON-EBAY PRICE)!!!

POWER & SOUND OF A BIG BLOCK FOR A SMALL BLOCK PRICE!

** "BUY BEFORE END OF AUCTION SPECIAL".......TAKE $800 OFF "BUY IT NOW" PRICE (ONLY $6,990 TOTAL PRICE) & ALSO GET FREE SHIPPING (ADDITIONAL $300-$700 VALUE)(WITHIN CONTINENTAL USA) IF YOU DO "BUY IT NOW"  ON THE LAST ONE LEFT & BEFORE THE END OF THIS AUCTION!!! 

UNBEATABLE DEAL ON A RARE / HARD TO FIND COMBO!!!

STREETABLE 430 HORSEPOWER & 455 FT./LBS. OF TORQUE ON PUMP GAS!!!

REASONABLY PRICED, BALANCED & BLUEPRINTED, HIGH HORSEPOWER BIG BLOCK 340 CID SMALL BLOCK MOPAR!

MOPAR HP CYLINDER HEADS (AWESOME BIG VALVE HP FACTORY HEADS) 

EDELBROCK PERFORMER RPM ALUMINUM HP INTAKE MANIFOLD

SPEED-PRO HP PISTONS

MOPAR 340 CRANKSHAFT

MOPAR FORGED 6.123" RODS 

COMP CAMS "NOSTALGIA PLUS / SPECIALTY CAMSHAFTS" HYDRAULIC HP CAM (#20-318-4, ENGINEERED FOR THE SMALL BLOCK MOPAR & A MORE MODERN, HIGHER LIFT, & MUCH BETTER VERSION OF THE MOPAR PERFORMANCE "PURPLE" CAMS)....AWESOME SOUNDING IDLE & POWER YET STREETABLE!!!

THERE'S NO REPLACEMENT FOR CUBIC INCH DISPLACEMENT!

BALANCED & BLUEPRINTED (NO PRODUCTION LINE)

WOW!!!!

CALL WITH ANY QUESTIONS AND CUSTOMER SERVICE!!!

MARK'S PERFORMANCE ENGINES

(623)388-2834

SMALL BLOCK MOPAR 340 CID / 430 HORSEPOWER COMPLETE STREET / STRIP CRATE MOTOR!!

THERE'S NO REPLACEMENT FOR CUBIC INCH DISPLACEMENT!!

If want to upgrade that old, tired DODGE / PLYMOUTH / CHRYSLER 273, 318, 360, and bolt in extra horsepower & torque then this SMALL BLOCK MOPAR 340 CID Crate Motor by MARK'S PERFORMANCE ENGINES would be an EXCELLENT choice with 430 Horsepower @ 6300rpm and 455 FT/LBS of torque @ 5000rpm. This engine has an AWESOME musclecar idle & lope with enough camshaft to give it ALOT of extra streetable power!  If being used with an automatic transmission then a 3000-3500 rpm stall speed torque converter (STILL VERY STREETABLE) should be used.  A 750 cfm carburetor is recommended (Optional: See Below, Add $340). This engine runs on leaded or unleaded premium pump fuel. 

The BALANCED rotating assembly (typically includes: Crankshaft, Pistons, Rings, Connecting Rods, Rod Bearings, and Harmonic Balancer) featured in this engine:

  • MOPAR 340 Crankshaft
  • MOPAR FORGED 6.123" Rods With ARP HP Rod Bolts
  • SPEED-PRO HP Pistons (9.5:1 Compression/PUMP GAS OK)! 
  • SPEED-PRO HP Rings

HIGH PERFORMANCE MOPAR / DODGE / PLYMOUTH / CHRYSLER CRATE MOTOR

REGULAR PRICE: $8,990!!!!!!

ALL NEW / NEVER INSTALLED IN VEHICLE!


CALL
MARK'S PERFORMANCE ENGINES: (623)388-2834

OPEN 8AM-6PM MST M-F , 8AM-4PM MST SAT 
 

CALL US FOR DETAILS!!

@@@@  ALL NEW / PRO-BUILT / MACHINED / ASSEMBLED IN A STATE-OF-THE-ART FACILITY............NO HOME-BUILT JUNK!!!  @@@@


HORSEPOWER: 430, TORQUE: 455 FT./LBS. (VERY STREETABLE / PUMP GAS FRIENDLY!)

MOTOR COMES WITH (MOPAR CYLINDER HEADS, EDELBROCK PERFORMER RPM ALUMINUM DUAL-PLANE HP INTAKE MANIFOLD, HP DISTRIBUTOR, OIL PAN, H. BAL., TIMING COVER, WATER PUMP ETC.)!!!! 

NICE PERFORMANCE & MUSCLECAR LOPE/IDLE YET VERY STREETABLE & DEPENDABLE!

CAN BE USED WITH A DAILY DRIVEN PUMP GAS CAR/TRUCK, DRAG CAR, MARINE AND OTHER APPLICATIONS!


AWESOME PERFORMANCE & MUSCLECAR LOPE / IDLE YET VERY STREETABLE & DEPENDABLE!

BLOCK: MOPAR / DODGE / PLYMOUTH / CHRYSLER 340.  BARE BLOCK ALONE IS WORTH $1,000+

HEADSMOPAR IRON HIGH PERFORMANCE CYLINDER HEADS (WITH ALL NEW HP BIG 2.02"I/1.60"E STAINLESS STEEL SWIRL POLISHED UNDERCUT VALVES, HP Valve Springs, Chromemoly Retainers, 10 Degree Locks, Bronze Guides).  POCKET PORTED, INTAKE PORT GASKET MATCHED TO INTAKENOT YOUR GRANDMA'S STOCK "HIGH PERFORMANCE" HEADS!!  

CRANKSHAFTMOPAR 340 Crankshaft

PISTONS: SPEED-PRO HP Pistons (9.5:1 Compression)(PUMP GAS OK!)

CONNECTING RODSMOPAR FORGED 6.123" Rods With ARP HP Rod Bolts

MACHINE WORK:
Oven Baked / Shottabrated / Jet Washed & Magnifluxed (Completely Cleaned & Checked For Cracks)
Cylinders Bored (WITH TORQUE PLATE) & Finished Computer Honed To Within .0001'' Straightness & Roundness
Align Hone Main Bearing Bores/Saddles
Square Decked Parallel To Crankshaft
Balanced & Blueprinted
PROFESSIONALLY Assembled


ALL NEW PARTS:

  1. SPEED-PRO HP Pistons (9.5:1 Compression / PUMP GAS OK)
  2. MOPAR FORGED 6.123" Rods With ARP HP Rod Bolts 
  3. HASTINGS HP Rings 
  4. COMP CAMS "NOSTALGIA PLUS / SPECIALTY CAMSHAFTS" HYDRAULIC HP CAMSHAFT (#20-318-4, DURATION @ .050": 236I / 244E, LIFT: .490"I/.501"E (WITH 1.5 ROCKER ARM RATIO), LOBE SEPERATION: 108) (MORE MODERN, HIGHER LIFT, & MUCH BETTER VERSION THAT OPENS & CLOSES THE VALVES HIGHER &  FASTER THAN THE MOPAR PERFORMANCE "PURPLE" CAMS) (NASTY MUSCLECAR LOPE / IDLE YET VERY STREETABLE)!
  5. Speed-Pro HP Lifters
  6. CLEVITE CL-77 Rod/Main/Cam Bearings 
  7. CLOYES/SA GEAR True Roller HP Timing Set 
  8. ARP Connecting Rod Bolts (180,000 p.s.i) 
  9. EDELBROCK PERFORMER RPM ALUMINUM DUAL-PLANE INTAKE MANIFOLD (AWESOME Low-RPM Torque & High-RPM Horsepower)!
  10. FEL-PRO Gasket Set
  11. PROCOMP HP Electronic Distributor
  12. MELLING HV Oil Pump
  13. MELLING HP Oil Pump Pickup Screen
  14. MELLING Oil Pump Driveshaft 
  15. RPC Oil Pan
  16. MOPAR Harmonic Balancer
  17. MOPAR Cylinder Head Bolts 
  18. MELLING Pushrods 
  19. PIONEER Brass Freeze Plugs
  20. Mechanical Water Pump
  21. Mechanical Fuel Pump
  22. EDELBROCK 750 CFM CARBURETOR (OPTIONAL: ADD $340)
  23. MOPAR PERFORMANCE POWDERCOATED BLACK ALUMINUM HP VALVE COVERS (OPTIONAL: ADD $150)

Install This AWESOME Crate Motor In Your MOPAR  DODGE  PLYMOUTH  CHRYSLER  CUDA  CHALLENGER  ROAD RUNNER   CHARGER DART   VALIANT   SWINGER   SATELLITE   BELVEDERE   FURY   SPORT FURY   BARRACUDA   GTX   CORONET   SCAMP  SAVOY   STATION WAGON   PICKUP   TRUCK   D100   D200   STREET ROD  1/2 TON   3/4 TON   1 TON   DRAG CAR   DRAG PROJECT   SPEED BOAT   JET BOAT   V-DRIVE  MARINE Application   Or Any Street-Strip Rod/Machine, And Make A Statement When You Open The Hood, And (Or) Nail The Throttle! You Will Surely Enjoy For Years The Performance, Reliability & Awesome Sound This Crate Motor Will Make In Your Street/Strip Machine! This can also be used in place of 6 CYLINDER   SLANT 6   273   318   340   361  383  400   413   426  528  HEMI   

MARK'S PERFORMANCE ENGINES: (623)388-2834
OPEN 8AM-6PM MST M-F , 8AM-4PM MST SAT

New Jaguar XJ Supersport Diesel coming?

Sun, 30 May 2010

The Jaguar XJ Supersport TDV8 - expect it in showrooms in 2011 We’ve known for quite a while that Jaguar Land Rover were going to start putting a new V8 diesel in to their cars. The 3.6 litre TDV8 which goes in the Land Rover is a very good lump (made by Ford at Dagenham) with some decent horses and a nice fat lump of torque. But the introduction by Jaguar of the 3.0 litre diesel and its subsequent introduction in to Land Rover’s cars meant the 3.6 litre’s days were numbered.

New Car Sales 2012: Big winners – and big losers

Mon, 07 Jan 2013

Car sales in the UK hit a four year high in 2012 with over 2 million registrations. But which were the big winners and losers? Despite the Eurozone being on the verge of imploding – and the economic outlook on the gloomy side just about everywhere – 2012 has turned in to the best year for new car registrations in the UK since 2008.

Nissan recall due to faulty airbag sensors

Fri, 15 Mar 2013

Nissan is recalling the Altima, Leaf, Pathfinder, Sentra and Infiniti JX35 vehicles from model year 2013 due to a problem with passenger airbag sensors. According to NHTSA, there's a chance the sensors within the passenger Occupant Detection System (ODS) were manufactured out of specification, which could keep the passenger airbags from deploying in a crash. Nissan will notify owners in April, and dealers will inspect affected vehicles, replacing faulty sensors at no charge to the customer.