Find or Sell any Parts for Your Vehicle in USA

Oem Fuel Injectors 2002 Lincoln Blackwood 5.4l Dohc V8 *asnu Rebuilt* Bosch on 2040-parts.com

US $159.99
Location:

Orlando, Florida, US

Orlando, Florida, US
Item must be returned within:30 Days Refund will be given as:Money back or exchange (buyer's choice) Return shipping will be paid by:Buyer Returns Accepted:Returns Accepted Return policy details: Restocking Fee:No Manufacturer Part Number:XR3E-C5B Other Part Number:0280155865 Warranty:Yes Part Brand:BOSCH

Untitled Document

Price is for a set of 8 reconditioned fuel injectors!


Professionally Reconditioned and Flow Matched using the Industry Leading ASNU Machine!


YOU WILL GAIN PERFORMANCE AND GAS MILEAGE WITH A FLOW MATCHED SET OF OUR INJECTORS, EVEN IF YOUR FUEL INJECTORS ARE RELATIVELY NEW, FUEL DEPOSITS AND CARBON BUILD UP CAN BEGIN TO AFFECT FUEL INJECTOR'S PERFORMANCE IN AS LITTLE AS 3 - 4 YEARS

 

 photo IMG_7769_zps795248b2.jpg



These are professionally reconditioned O.E.M. fuel injectors.

 

NO MODIFICATIONS ARE REQUIRED!

These injectors are a direct "plug-and-play" product.

 

FOR LESS THAN THE PRICE OF CHEAP AFTERMARKET UNITS, WHY NOT USE FACTORY PARTS?

  

THIS SET OF INJECTORS WILL FIT THE FOLLOWING APPLICATIONS :

 
1999-2004 Lincoln Navigator 5.4L DOHC V8
1999-2002 Lincoln Continental 4.6L DOHC V8
2002 Lincoln Blackwood 5.4L DOHC V8


Factory Ford part numbers these injectors will replace:

XR3E-C5B

XR3Z-CB


THESE ARE ORIGINAL BOSCH INJECTORS , NOT CHEAP AFTERMARKET UNITS !

All of our injectors are reconditioned using a state of the art process with the industry leading ASNU machine!

 photo IMG_7762_zpsbab3b2e6.jpg
 photo IMG_7765_zps860240b6.jpg



Our injectors are rebuilt through the following process ;

1. Visual inspection for any physical damage that would render the injector inoperable

3. Any dirt, grease and paint is removed from the outside of each injector

2. All soft parts are removed ( o-rings, filters, caps etc… ) YES THE FILTERS “INSIDE EACH INJECTOR” are removed !  

4. All injectors are submerged in a cleansing bath under “ULTRASONIC VIBRATION” This powerful vibration with the presence of the concentrated cleaning solution breaks down all deposits and sludge built up inside each injector. The injectors are pulsed open and closed rapidly during this process to help remove contaminants.

5. All injectors are then FLOWED BACKWARDS under high pressure to flush out any remaining contaminants

6. All injectors are flowed and we look for a good evenly distributed spray pattern and proper electronic operation and current draw, along with a high pressure leak test.

7. All injectors are grouped in flow matched sets within 1% variance ( factory allows a variance of usually 3%-5% )

7. All metal bodied injectors are clear coated or repainted for that “like new” look.

8. All o-rings caps and filters are replaced and the injectors are then packaged.

 

All of our injectors come with a 100% satisfaction guarantee, if you are unhappy for any reason we will make EVERY effort to resolve the situation. We have spent a substantial amount of time to perform research and study on which injectors work properly in which applications, and we assure you that the injectors you receive will work flawlessly on the vehicles in the compatibility list. If you are using them on ANY other type of application other than described in the ad, please assume responsibility for proper fitment and application, or ASK us prior to purchasing ! We would be glad to answer any questions you have. All warranty issues will be resolved by exchange, refunds ONLY IF we no longer have the correct units available for exchange. Please contact us and give us the opportunity to make you happy prior to leaving feedback !

All of our shipping is done through priority mail, or express mail. Priority mail is FREE to ANYWHERE in the United States and territories thereof, $20.00 to Canada, and $30.00 anywhere else in the world. ALL EXPRESS MAIL ORDERS PLEASE CONTACT US PRIOR TO PURCHASING SO THAT WE CAN MAKE SURE WE ARE ABLE TO SHIP IMMEDIATELY TO AVOID ANY DELAYS !!! If we are able to ship express mail the price for doing so is $15 within the USA, $35 to Canada, and $50 anywhere else worldwide.

THERE IS NO CORE CHARGE OR ANY OTHER HIDDEN FEE’S OR CHARGES ON ANY OF OUR SETS!
IF YOU HAVE INJECTORS THAT NEED TO BE SERVICED PLEASE LET US KNOW AND WE CAN RUN AN EBAY ADD OFFERING THE RECONDITIONING SERVICE TO YOU ALONG WITH OUR WARRANTY.

DO YOURSELF A FAVOR, DON’T BUY SOME CHEAP USED SET OF INJECTORS OFF EBAY FOR YOUR VEHICLE, THEY ARE USED INJECTORS AND WERE MOST LIKELY REMOVED FOR A REASON…… AND SOME SELLERS SELL INJECTORS THAT ARE “USED BUT WE TEST THEM” ….. HOW ? ON A VEHICLE ? WITHOUT THE PROPER EQUIPMENT THAT’S THE ONLY WAY TO TEST THEM, AND THEY MAY BE WORKING, BUT THEY ARE NOT AT 100% CONDITION. DON’T FORGET, FLOW MATCHED INJECTORS AND “PROPERLY” WORKING INJECTORS WILL HELP YOUR VEHICLE ACHIEVE OPTIMAL GAS MILEAGE AND PERFORMANCE, IF YOU HAVE ANY QUESTIONS AT ALL PLEASE EMAIL US !!!

 photo IMG_7768_zpsc58bdd56.jpg  photo IMG_7770_zps0beb54a5.jpg  photo IMG_7773_zps8c4b2633.jpg  photo IMG_7774_zps54103e11.jpg  photo IMG_7775_zps8a6412b9.jpg

Fuel Injectors for Sale

Dedicated automotive design school to open in India

Sat, 12 Jun 2010

阅读本文中文版本请点击这里 The doors are about to open to a new automotive design school called DYP-DC Centre for Automotive Research and Studies (though colloquially known as DYP-DC College). Based in Pune, Maharashtra, India, the college will focus on automotive design, and in time, incorporate automotive engineering and management into a slightly wider curriculum. Notably, students will have the opportunity to build a full scale, working, drivable prototype as part of their final year projects in both the undergraduate and postgraduate degree programs.

Rain doesn't dampen spirits at Orphan Car Show

Wed, 28 Sep 2011

With rain falling as the show cars arrived, organizers worried that moving the 15th-annual Ypsilanti Orphan Car Show from its original June weekend to late September wasn't going to work out after all. It was rescheduled last year after heavy rain in June and participants voted to make the change permanent. Fortunately, the rain blew over before the gates opened to spectators and Sunday turned out to be as nice a day as Saturday, when more than 30 entrants enjoyed a tour to view the extensive Nash collection that Ken and Mary Ann Havekost have accumulated in Monroe, Mich.

Toyota FT-86 leaks out. Well, FT-86 with Modellista extras

Thu, 27 Oct 2011

Toyota FT-86 leaks out (click picture for full size) It’s no real surprise that the first photos of the Toyota FT-86 in production trim have leaked out from a printed brochure ahead of the official reveal at the Tokyo Motor Show next month. After all, printers have a lead time to get hard copy brochures printed and there’s nothing that leaks quite as much as a printer with a scoop on his desk. So we get treated to what appear to be the first proper pictures of Toyota’s FT-86 (for the Subaru BRZ just add Subaru badges in your head), and it looks quite bit more aggressive than we’d expected.