Pro Series Original "genuine Product" 2010-2012 Chevy Camaro Zl1 Hood on 2040-parts.com
West Covina, California, US
100%AUTHENTIC PRODUCT
PRODUCT DESIGN:
- FITS 2010-2012 CHEVY CAMARO
- Includes
- X 1 FULL REPLACEMENT HOOD
- 100% Genuine
- Hand Crafted
- Brand New
- Pliable FRP(fiberglass reinforced plastic) Product
- Gel-coat finished
- Aluminium mesh grill insert included where applicable
- Funtional Vent
- Uses factory hinges and latch
RAM AIR Fiberglass Hood High Grade A+
Fully Functional Vented Heat Extractor
Material
( FRP ) FIBERGLASS REINFORCED PLASTIC
AIT Plastic resins -AIT special plastic resin is a hybrid form of polyester resin which has been toughened with epoxy molecules within the main molecular structure. AIT resins offers better resistance to moisture absorption than regular polyester resins.
Gelcoat - provides high impact strength, excellent gloss, it is water resistance and helps prevent blisters from forming after laying the fiberglass mat.
Benefits of Fiberglass:
- Does not expand or shrink with temperature change.
- Does not absorb water.
- High strength to weight ratio.
- Non-flammable.
- Chemical resistant (except for hydrofluoric, hot phosphoric acids, and strong alkaline substances.)
- Electrical insulator
Vinyl Ester Resin - This gives superior flexibility and strength than that of polyester resin.
Multi-Layer Fiberglass - Our pieces have 4 oz. layers of hand-laminated fiberglass with a plastic gel coat finish.
Strong Gel Coat Finish - This results in a SMOOTH finish and adds extra strength to the part! Please be careful because other manufactured finished body kit parts will have orange peel rumples.
Fitment - Our pieces have a much BETTER QUALITY fit when compared to competitor products.
SHIPPING PRICE: IS FOR lower 48 states.
FOR Hawaii, Alaska,Puerto Rico,Canada and ALL International areas will require us to obtain individual quote from our freight carrier.
* Please make sure you provide your correct info for shipping CORRECT NAME,ADDRESS AND VALID TELEPHONE # , YOUR ORDER WILL NOT SHIP UNLESS YOU COMPLETE ALL CORRECT SHIPPING DETAILS
*We are not responsible for any extra costs caused by incorrect shipping information.
*If you have any question like changing your ship to addres, Please contact us within 24 hours after you paid
*We do not deliver to APO/FPO/PO BOX OR MILITARY BASES, please provide your physical Shipping address. We deliver to both home or business locations.
*All listings advertised are for ship out only, if interested in doing a local pick up price varies . Please email us through eBay for WILL CALL PRICING
Shipping Damages
Please inspect the item upon delivery before signing the receipt.DO NOT SIGN UNTILL YOU INSPECT ITEM(S) Make Sure You ->Refuse delivery if the item is damaged and make sure you note refused do to damages upon freight & we will reship you a new Item(s)asap! as long as you follow proper instructions
*Contact y2kzigzag within 24 hours to file a claim request.Please make sure to include your item # Failure to comply with this policy may result in a denial for damage claim.
*All returns must be approved before you ship any item back to us.Return item must be issued by y2kzigzag *If you ship an item back to us without contacting us prior to shipping, we will refused
*Shipping, handling, and insurance charges are not refundable.
*All Order Returned will be charged return shipping.
*All returns are subject to a minimum of a 20% restocking fee.
*All shipments are made with a signature required.
*All our products requires professional installation and is highly recommended. Buyer assumes all risk on shipment and usage. All items are as is with no warranty
*images are for references only. If you are looking for a exact specific vent or grill, please contact us before making your purchase. Aerodynamics and ground effects are shipped unfinished and requires prep-work & priming before painting
INSTALL & FITMENT
Before you start, please make sure you have the proper safety equipment to avoid potential harm to you and your vehicle.
FRP Composite/Carbon FRP Composite hood installation can relatively be an easy process; anyone with a little mechanical knowledge should be able to install parts in a few hours. Tools are also very standard, and if you have taken your factory parts before, replacing it with an aftermarket piece should be no trouble at all.
- Remove factory hood from the bolts at the end of the hinges. (Do not remove the hinges)
- Install new aftermarket hood by reverse process.
- Tighten bolts to just enough torque to hold the hood in place, but lose enough to be adjusted by a tug.
- Remove hood latch and check alignment.
- If the hood is not aligned properly, adjust accordingly and tighten bolts at the hinges.
- Re-install hood latch and adjust for fitment. (If the hood is latched but not fully close, the latch might need to be adjusted shorter. If the hood does not latch down, the latch might need to be adjusted longer.
- Check for fit and you’re done.
Note: Installation of hood at your own risk. We advise hood pin for ANY aftermarket hoods. Even though we sell hoods as off-road and show purpose only, we recommend hood pins if it’s going to see any type of road use.
Payment Method:
PayPal
*We accept PAYPAL as only payment method. All item(s) will be held 3 days for payment with an unconfirmed address.
*Unpaid auction will be forfited and unpaid dispute will be filed to ebay.
*All payments are expected within 7 days after the last winning auction is closed.
* If other payment method, please contact us prior to placing a bid.
*For all California state buyers must pay sales tax.
CONTACT US
email us through ebay
If you have any questions or concers please send us a message and we will reply back as soon as possible within 24 hours.
Please make sure to leave us possitive feedback.
TERMS & CONDITIONS
All products sold are aftermarket products and intended for off-road or show use only. Vendor is not liable for any damages or injury as a result of these products. Purchaser is responsible for complying with any/all local, state, and federal laws regarding the addition or modification of parts. We disclaim any liability from the removal of reinforcements, bumpers, turn signals, and other safety equipment on the vehicle. Professional installation of body kits and body related parts (i.e. bumpers, side skirts, hoods, fenders, etc.) is highly recommended. Hood pins are highly recommended for aftermarket hoods. Vendor is not responsible for any items damaged during installation.
Body Kits for Sale
- 1999-2004 ford mustang saleen side scoops "duro flexi"original ait "100%genuine"(US $89.99)
- 2000-2005 toyota celica carbon fiber hood scoop"original ait"100%genuine product(US $120.00)
- 2006-2010 dodge charger challenger ram air hood "original ait "genuine part" (US $320.00)
- 2000-2005 mitsubishi eclipse evo full body kit "duro flexi"original ait"genuine"(US $295.00)
- 96-98 nissan pathfinder front bumper cover ni1000166 new primered black to 12/98(US $61.45)
- 00 01 02 03 04 05 toyota celica vs-gt full body kit"duro flexi"original ait 100%(US $300.00)
Ford site weighs F-150 against rivals
Tue, 27 Sep 2011Ford has launched a comparison Web site for the F-150 pickup that illustrates how its truck stacks up against the competition--packed with video footage, testimonials and data. On the site, you can choose to dive into "torture test" footage of the F-150, or you can opt to complete the head-to-head pickup comparison test to find the F-150 engine that best suits your needs, and how it compares with rival trucks. First, visitors are prompted to select whether the engine will be used for work or play, how much weight it will be required to haul (up to 2,860 pounds) and how many pounds it will need to tow (up to 11,300).
Cadillac teases Detroit 2013 concept at Pebble Beach
Tue, 21 Aug 2012Cadillac teased a new concept car at the weekend at Pebble Beach to be unveiled in the steel at an unnamed American auto show early next year. We'll see you on the GM stand in Detroit then. During a press event Cadillac's Global Design Director Clay Dean said it was time for the brand to "reflect back not for nostalgia, but what made us great at the time." There were no further details about what we can expect from the concept but from what we can see from these renders is what appears to be a further move away from the geometry of the Art and Science form language towards a more sculptural surface treatment intersected by sharp, precise creases.
Mercedes C-class (2014) interior images and technology revealed
Tue, 22 Oct 2013By Ollie Kew First Official Pictures 22 October 2013 18:00 This is the cabin of the new Mercedes C-class, which will go on sale in spring 2014. It’s aiming to out-drive and out-sell the BMW 3-series, new Audi A4, and Jaguar’s upcoming ‘XS’ sports saloon.Lots of design cues have been taken from the flagship S-class to create the simplified new C-class cabin, but there are still an awful lot of new features. They’re all bolted into a C-class that’s 100kg lighter than the outgoing model, and will boast, Mercedes claims, the lowest fuel consumption in its class.