Repair All Faded Gelcoat Plastic Fiberglass Marine Maxum Chaparral No Wax Polish on 2040-parts.com
Bedford, Massachusetts, United States
Condition:NewBrand:Protech Polymer ProductsCountry/Region of Manufacture:United StatesManufacturer Part Number:GCR4
PRESTO!™ Gelcoat Rejuvenator
"I couldn't believe how well this product worked. My 1976 Sea Ray looks like new again!"
--Ken A.Bay Village, Ohio
Engineered For ALL Fiberglass Watercraft, Aircraft & RV's
4 oz. bottle of UV activated GCR covers up to 400 Square feet.
APPLICATION INSTRUCTIONS AND OTHER QUANTITIES IN OUR EBAY STORE!
From MAXUM OWNERS Club Blog:
"Decided due to the condition of the gel coat I had nothing to lose. I spent a lot of time putting this stuff on both carefully and to the letter of the directions. I was concerned after the first coat as it still looked flat and splotchy in a few places. I decided to put on a second coat and be a bit more liberal with the quantity applied but still not allowing excess build up. I will say I am overall impressed...Overall, I am seeing a result similar or better than rubbing compound/buff/wax repeat. It works really well on the dash and other faded plastics too!"
This is the only product on the market that will revive faded gelcoat without wasting hours on buffing or rubbing! It will provide maximum shine and UV protection that will last for years to come. Don't be fooled by ancient polishes or toxic two part solvent / clear coats that claim to be the same thing. Our one part UV activated Polymer is safe, non-toxic, non-carcinogenic and works better than anything else you can find for Fiberglass, Plastics, or paints.
HERE is a video from a customer showing how easy and effective Gelcoat Rejuvenator is at restoring a faded boat dashboard!
Gelcoat Rejuvenator Features
NO Silicone or Wax Content
PTFE Fluoropolymer Protection
Sunlight/Daylight Activated Hardener, but will Harden on a Cloudy Day
One Application Lasts for Years
Fast & Easy Wipe-On Application: Wipe-on with clean paper towel
Sold Ready To Use: NO Hardeners, Retarders or Reducers To Mix
NO Compounding, Sanding or Buffing
Waxable, Sandable & Re-Paintable
Works on ALL Colors
Out-Performs Automotive OEM Paint: • 300% Harder to Scratch or Scuff • 200% Better Chemical Resistance • Superior Color Protection & UV Blocking
Non-Yellowing & Non-Flaking Urethane
Fights Traditional Weathering
100% POLYMER Formula Means: • NO Free Isocyanates • NO Water • NO Alcohol • NO Solvents • NO Solvent Related Hazards • 0.0% Volatile Organic Components (VOC’s) • Non-Polluting, Non-Toxic & Non-Carcinogenic
EBAY TESTIMONIAL: "I have never contacted someone before to tell the how good or bad their product was. It’s just not me, but I am so astonished how well this stuff works. I have a red 272 formula and in minutes it made the damn thing look brand new. I have already called all my boater friends. You HAVE to get this stuff in marinas across the country. This product is way too good for people to not know about. I am going to bring some to my local marina to show how good it works. Thanks for saving me a weekend of buffing and waxing."
teamwoody72 "I recently used the gelcoat rejuvenator on my faded 20 foot boat and I simply cannot believe the results. I only wish I had found this product before I spent an entire weekend compounding and waxing the other side with poor results. You should consider me to be your "new" salesmen in New York. I am going to be telling everyone at my marina about this awesome product! It's a life saver! I have enclosed some photos of my boat."
--Mike Islip, Terrace NY PRESTO!™ Gelcoat Rejuvenator - How It Works!
As gelcoat surfaces wear, the chemicals wash out which creates microscopic pores. As a result, the surface looks white or faded. PRESTO!™ penetrates, fills & seals these pores restoring surface color & fighting future damage.
Unlike other products, PRESTO!™ is so durable it lasts for years – not weeks. PRESTO!™ will not wash away like wax, silicone or oil-based products. Because PRESTO!™ penetrates surfaces so effectively, as little as one coat can restore the showroom-like appearance of your vehicle.
PRESTO!™ was developed & tested over 15 years before the first bottle was ever sold. Other car care products use the same old, conventional chemicals which is why they perform the same old way. We pioneered the use of new and unique, higher performing chemistry that gives PRESTO!™ abilities that NO other automotive or marine care product can meet or beat.
In the time it takes to read this, PRESTO!™ PRO takes care of scratches, scuffs & fade damage - permanently!
Combines PTFE & clear coat protection in a single, ready to use package. Simply shake & wipe-on!
FAST & EASY Wipe-On & Wipe-Off Application with regular, clean, paper towels.
Engineered specifically for MARINE fiberglass/gelcoats of any color.
Save hundreds of dollars in time, money, effort & repair shop costs with each bottle.
Out performs silicone, wax or oil-based products including “PTFE waxes.”
Once cured, will not wash away or discolor with time or water like silicone, wax or oil based products including “PTFE waxes.”
ProTech Polymer Products, Ltd. is concerned with human & environmental safety. All PRESTO!™ products are non-toxic & environmentally friendly. The manufacturer believes so strongly in PRESTO!™ that they back PRESTO!™ with a Limited Five-Year Warranty.
Wet in Burma in part 1 of the Top Gear Christmas Special
Top Gear tonight – episode 6 of series 21 – isn’t actually part of the regular series twenty one (that was done and dusted with last week’s Porsche 918 Spyder episode) but is the first part of a two part Christmas Special Road Trip. Yes, March is a bit late for a Christmas Special, but it’s becoming the Top Gear norm. What isn’t normal is the fact that there are no cars for Messrs Clarkson, Hammond and May to drive, instead they’re all in beaten up trucks bought sight unseen from the internet for a road trip across Burma to the River Kwai.
New Zealand enthusiast Ivan Sentch is in the process of 3D printing a 1961 Aston Martin DB4. Engadget reports that he bought a $499 Solidoodle 3D printer and has been working on this project since December 2012. Using a Nissan Skyline as a donor car, he'll make a fiberglass mold of the print and hopefully transform this thing into a drivable, street-legal car for a fraction of the cost of an authentic DB4.
From 5-9 August, over 24000 artists, designers, research scientists, developers, filmmakers, and academics gathered in San Diego, California, for the 34th Siggraph Conference on Computer Graphics and Interactive Techniques. The Siggraph conference and exhibition ranges from several days of highly technical courses and academic paper presentations, through to hands-on demos of new technologies, an art gallery, computer animation festival, and the two-day exhibition by software and hardware vendors. Siggraph straddles the scientific, engineering and the artistic aspects of computer graphics and interaction, with film-makers showing how they made "Giant Frickin' Robots" for the upcoming Transformers movie, while the Papers presentations and Courses deal with the latest research, software evolution and hardware systems that make it all possible.