Find or Sell any Parts for Your Vehicle in USA

Scootworks Choptpac Motorcycle Tour Pack, Highrollers Mc Backrest, Vivid Black on 2040-parts.com

US $675.00
Location:

Zebulon, North Carolina, United States

Zebulon, North Carolina, United States
Condition:New Brand:Scootworks Manufacturer Part Number:ChopPac-BL

This is our latest addition to our Tour Pack lineup. These are hand laid & pressed fiberglass, manufactured at our shop in Zebulon NC USA, not heavy chopper-gun or molded plastic construction like most others. If you're looking for the cheapest plastic crap from China, this isn't for you. These are each hand built to order, the absolute highest quality, works of art...check the bagger forums. We build for many shops and lots of high end custom builders. As opposed to the plastic junk that is molded in literally seconds and requires piles of bodywork, these each require at least 7 days of human labor in construction. The lids have an extended rain drip, the interior is sprayed with a matte black finish, and the lid seal is installed. The bottom is a reinforced flat bottom for installation on any type of mount. We use our exclusive stainless steel hinges with welded hinge pins, and chrome plated double locking latches. The lid is secured in the open position with a custom stainless steel lanyard with rubberized covering for a "no rattle" system. This black version is manufactured with a Vivid Black gelcoat exterior. TAKE NOTE, these come assembled... all 89 pieces of hardware are hand fitted, drilled, and assembled in the CORRECT locations. Our plastic competition sends you a box of plastic junk, bags of hardware and pages of instructions for YOU to figure out where to drill holes and how to assemble it. OK, on to the dimensions...

Height at the rear of the ChoptPac is 5-1/2", height at the front is 7", and the max height in the center front is 8". Unlike our competition, our ChoptPac can handle a couple of 1/2 lids and still close the lid. We worked many hours on this!

The ChoptPac for sale in this listing has a Vivid Black gelcoat finish, chrome hardware, and the optional custom built Down-N-Dirty backrest seen in the photos from HighRollers Motorcycle Seats.

Be aware of the current typical build time is approx 3 weeks. Shipping is free to any USA address or US APO.

**NOTE**, this is just one variation of our custom tour pack builds. We offer the ChoptPac with a primer finish for painting, or a Vivid Black gelcoat finish (seen in the pics above). The hardware can be supplied with chrome latches as seen in the pics above, or with black hardware at no extra cost. The ChoptPac can be built with the standard RH open for the lid, or we offer our reverse build (only available from us!) for bikes with a center stand or trike, so the lid is easily opened from the LH side when you step off of the bike (no extra cost). The interior is available un-carpeted with a matte black finish (standard), with black interior carpet in the bottom ($50), or with carpet in bottom and lid ($80). 

- The base model is finished in automotive primer, cost is $450 shipped in the USA.

- The Vivid Black gelcoat version is $500 shipped in the USA.

- We can build this with black hardware at no extra cost.

- Our Interior carpet is $50 installed in the bottom, $80 installed in the bottom and top. Most customers only carpet the bottom.

- We offer a "reverse build". Our molds and part accommodate this, and can only be done by us. This is for bikes that use a center stand (don't lean to the left) and trikes. It allows you to step off the bike on the LH side, and immediately open your pack... as opposed to ALL the others that require you to walk around the bike to open the pack. No extra cost during the custom build!

- All of our packs have an OSB reinforced bottom...no metal internal plate required to prevent the bottom from cracking out, like HD and all of the plastic junk requires!

- We can custom build for speakers upon request

- The lightest packs in the biz, and the strongest!

**Note, backrest NOT included in the base model. It _is_ included in this particular listing. I know, the plastic junk out there sends you their plastic backrest, but again...this system is not for the cheapskates out there. If you're building a $40k+ bike, don't cheap out on the pack and backrest and put junk on it. The forums are full of bikes with the plastic packs breaking out at the bottom, literally falling off while on rides, etc. Like our pack, we sell the top-of-the-line  "Down-n-Dirty" custom backrest by HighRollers MC Seats (seen in many bagger mags on custom bikes every month). The cost of that is $175. Our pack is also compatible with the H-D mini-backrests.

Contact me at my eBay user name on this page for more details on custom builds for your application, and see more pics on our FB page listing at 621Cycles .


McLaren P1 (2013) CAR's race-speed Goodwood ride

Tue, 05 Nov 2013

The McLaren P1 leaves the startline like a shard of shrapnel riding the percussion wave of an explosion. It needs high-definition slow-mo to describe it, like those films of a bullet shattering an apple, or the slow-motion shots of an F1 car skipping over a kerb, front wing flexing, tyres deflecting, all that physics captured in beautiful, drowsy detail. In my mind, when I re-live the first moments of my ride up the Goodwood hillclimb in McLaren’s new hypercar, I see the release of energy in the same 1500-frames-per-second style.

Memorial service for former GM design boss Chuck Jordan is Friday

Fri, 28 Jan 2011

A memorial service for Chuck Jordan, design chief at General Motors from 1986 to 1992, will be held at 1 p.m. Friday, Jan. 28, at the GM Heritage Center in suburban Detroit.

Mercedes SL (2012): aluminium saves 8% weight

Tue, 29 Nov 2011

Mercedes' new 2012 SL will weigh a solid 140kg less than today's SL roadster - a significant saving of some 8%. This crash diet has been enabled by the adoption of aluminium for the new SL. The learnings from the SLS gullwing are now trickling down to the higher-volume SL, which will be revealed in December 2011.