Find or Sell any Parts for Your Vehicle in USA

Silicone Vacuum Hose Kit 85-91 Bmw 325i Is E30 Blue on 2040-parts.com

US $98.00
Location:

Sapulpa, Oklahoma, United States

Sapulpa, Oklahoma, United States
Condition:New Color:Blue Manufacturer Part Number:126b Brand:HPSI Motorsports

PhotobucketPhotobucket
 (The kit red version of the kit pictured above on an actual customer car)

Hi Performance Store

Silicone Vacuum Hose Kit  

You are bidding on a high performance silicone hose kit for a BMW 325i 325is E30 chasis.  Years 1985-1991

This kit is Blue.

          The Bosch Motronic fuel injection system used on these cars is excellent but it's easily affected by air leaks in the vacuum hoses. These leaks can cause high emissions, poor fuel economy, difficult starting, and a decrease in horsepower. In fact about 90% of all running problems in these cars are due to air leaks. We have a FREE tech article on troubleshooting and repairing these injection systems  If you want to read it just ask, it really is FREE. I promise this article will save you money and aggravation in repairs.

What is in the kit?

           The BMW BMW 325i 325is E30 kit replaces all the vacuum lines under the hood, the windshield washer hoses, and the four small diameter coolant lines that connect to the throttle body and coolant reservoir. This kit is pre-cut with easy to follow step by step instructions. The kit includes at total of 22 feet of hose in four different sizes of silicone.

Why buy our Kit?

           Replacing your car's air hoses with silicone hoses and eliminate power robbing vacuum leaks. Our hose kits use the finest silicone hose available and should last the life of your car. This is one of the best upgrades you can buy for your car.   

           Our vacuum hose kits are the best on the market. We use only 100% pure silicone hose, not silicone hose made with cheap filler like sand (no kidding, some of the cheaper brands do that!). Our hose has very thick walls and will not collapse under vacuum when hot. These hoses are sized correctly and they grip the car's fittings very well and in most cases do not need clamps. They will seal air tight without clamps even under turbo and or supercharger boost. We do suggest clamps for the power brake booster hose but that's the only place we use them. All our hoses will make very tight bends without collapsing internally. The smallest size can make a 180 degree turn inside a one inch circle. This makes it very easy to duplicate the factory's routings. We offer the best warranty in the business and we are here for tech support everyday.

         I know it's a cliche, but beware of imitators. We at hiperformancestore.com were the first company to sell vehicle specific silicone hose kits. Lately a few other companies have been trying to copy our hose kits. Quite a few even use the same language we use on their web site and in their ebay ads. They usually use inferior hose and almost never have enough hose in their kits to do the job.  Save yourself a lot of trouble and buy your kit from us. Take a look at our hose videos on youtube, search there for hiperformancestore to find them. The videos there show how our hose holds 50 pounds of boost without clamps.

          We have personally put over 100,000 miles on one hose kit with no problems. This is truly an excellent product that will improve your BMW's  reliability and performance.

         In the picture below you can see our hose on the left vs. hose from another kit on the right. The wall of our hose is 70% thicker and has a uniform thickness all the way around. Ours is also the correct METRIC size like the original BMW Hoses, the other hose is the closest SAE size which will fit but it's a sloppy fit. 

Our hose (blue) vs competitors (red) (same I.D.)                                                              Ours: Red, Green, Yellow, Silver/Gray, Purple, Black, Blue   My Stores Logo

PhotobucketPhotobucket

Kits are shipped 2-5 business days upon receipt of payment.

Thank you,  Greg & Misty

918-760-0668
918-224-4646

M-F 10:30am-6:30pm central time zone


On Jun-22-10 at 10:18:20 PDT, seller added the following information:

This kit will not fit a BMW 325i is E30 Convertible. You need to purchase the BMW 325i is E30 Convertible silicone vacuum hose kit.


PLEASE REVIEW FOR COLOR & SHIPPING ADDRESS CONFIRMATION
Our goal is to get your kit out as quickly as possible. It's very important that if your purchased item offers 7 colors available and does not specify an exact color, regardless of what is in the picture, you must send us an email, note to seller, or leave us a voicemail so we know what color to ship to you. When we receive no color confirmation, our shipping time is then delayed. The same goes for your shipping address. Please verify the shipping address you provide in paypal is correct and can be used as a deliverable address.


You have 24 hours after giving payment to confirm color or correct address problems. If no color confirmation is received, you will be shipped whatever color is displayed in the ad photo. If no address problems are corrected, we will simply cancel the order. Please let us know if either of these issues occur with your order. Thanks!

Car Design China Award Winners at Umeå

Thu, 08 Nov 2012

CDN 中国汽车设计大赛获奖选手在 Umeå Two of the Car Design China Award 2012 winners won the fantastic prize of a two-week fully funded placement at Sweden's Umeå Institute of Design to mix with like-minded young designers and learn new skills with some of the latest technology available. We spoke to Umeå's Programme Director for Transportation Design Education Demian Horst to find out how Fang Siyuan of Zhengzhou University of Light Industry and Huang Hongliang of Huazhong University of Science and Technology got on. After arriving on 21 September the two students joined up with the course's 20 international students – including two Chinese students – in the studio before undertaking their first task, which was to join both transport classes in a sketch workshop with BMWDesignworksUSA designer and Umeå alumnus Tommy Forsgren.

Toyota Auris concept (2006): first official pictures

Fri, 29 Sep 2006

By Ben Whitworth First Official Pictures 29 September 2006 08:24 Toyota Auris: the lowdown Toyota has killed off the Corolla name in Europe and replaced it with the all new Auris, in a move reminiscent of Ford's Escort to Focus switch. Although the Auris is billed as a concept, it's production ready bar a few minor details. What you see here is what you'll get when the three- and five-door hatches arrive in uk showrooms early next year.

GT supercar designer leaving Ford

Thu, 15 Jan 2009

Designer Camilo Pardo, credited with drawing the Ford GT supercar, is leaving the automaker after a 24-year career with the company. Pardo, 45, confirmed to AutoWeek that he is leaving Ford, but he declined to give details. He said final details of his departure have yet to be worked out.