Find or Sell any Parts for Your Vehicle in USA

Smooth Black 4.3 V6 Tall Aluminum Valve Covers Clears Roller Rockers, Chevrolet on 2040-parts.com

US $349.00
Location:

McKinney, Texas, United States

McKinney, Texas, United States
Condition:New Brand:Aussie Speed Surface Finish:Black Powder coated Manufacturer Part Number:AS0037b Country/Region of Manufacture:Australia UPC:N/A

Small Town Speed is proud to be the US dealer for the high quality, low production, sand cast, hot rod parts!

Your looking at a pair of Black powdercoated(its a satin/semi-gloss/wrinkle type finish, with the fins accent sanded) Aussie Speed aluminum "pro-street/street rod" style valve covers(these are smooth on top, giving more of a modern look than the finned hot rod covers we also offer); to suit Chevrolet 4.3L & 262 pre vortec 90 degree center bolt tappet covers. These fit Vortec v-6 Chevy engines as well as early v6 engines with center bolt valve covers. These covers are 70mm inside from the gasket face to the top of the inside and are a must when installing roller rockers as they are taller than the cheap looking stock plastic or pressed tin factory valve covers, and are a must to give your "Mini-SBC" that hot rod look! The covers have reinforced center bosses, molded inner & out gasket retaining flanges & shrouded breathers for oil cap & pcv valve. They accept push-in breather caps. These covers use the 1986 to 1992 thick rubber factory or after market rubber gaskets.

These covers do require longer retaining bolts that can also be purchased from Small Town Speed(allen, for $15 a set(free shipping with the valve covers), or call me at first at 972-989-4003, and I can arrange to throw them in for free....

Make sure and check out my other listings for the full Aussie Speed line, and contact me if you don't see an Aussie Speed part your interested in listed. If your interested in a few parts contact me, and Ill make you a package deal to save you a bit of money. Also check out my "SmallTownSpeed" shirts, because I can add one to any order with zero additional shipping costs.

All of the Aussie Speed polished parts are individually hand polished, and they are a good quality polish, but not a full blown show polish, the most notable difference is between the fins, and the recesses for the bolts are not polished, and the flat areas are not mirror straight(they have not been block sanded at each step). They still look awesome, but are not a mass produced parts, or full blown show polished parts(a polish job like that would exceed the cost of the raw valve cover). I love how they look, and everybody I've shown them to has loved them too; I just mention this so you know exactly what you are getting.

NOTE: USPS PARCEL SELECT GROUND SHIPPING ON THIS IS FREE to you, BUT I RESERVE THE RIGHT TO SHIP VIA UPS or FedEx too.

SmallTownSpeed is proud to be the North American Dealer for Aussie Speed performance products. I got started in their small engine line, and have found a good demand for their unmatched quality of products for their automotive line. Aussie speed does a BOAT load of R&D on these slant sixes, and they actually race them, to see just a little bit more about their R&D, go to the aussie speed shop site, and click the "Slant Six Info" tab on the left. Me bringing these parts in via freight gives me the ability to offer them in the USA for significantly less expensive than ordering straight from the manufacture; which previously has been the only option.




I'm a full time Firefighter/paramedic, and an avid motorcycle rider. I part out bikes to help offset what I spend building, riding, and racing them. With that said, I'm not a big shop, and this is not my only job. I will do everything in my power to ship parts out ASAP, and 95% of the time I get them out within 1 business day of when they are paid for, but because of my work schedule(where I work 24hr shifts, and sometimes work 48 and 72hr shifts), and my riding, there may be rare occasions that it may take longer than 24hrs before I get it shipped out. If you are in a rush to get the part, please contact me, and I will do everything I can get it out fast(and if you contact me, I can make special arrangements, and 99% of the time can get it sent out the same day). But if you are somebody who expects everything to be shipped instantly "come hell or high water", please find another seller who will better fit your needs, because I may very well be busy dealing with hell or high water, or just unwinding and riding my motorcycles. And the latter should be easy enough to relate to, right? I ALSO SELL PARTS ON FORUMS and LOCALLY, so I reserve the right to END AUCTIONS EARLY. I'm happy to combine shipping when practical, and I'm also happy to make package deals if there are several parts you need. Email is the best way to contact me, but I'm happy to give you a call, or give you my personal cell number if you would rather call me. FOLLOW ME ON FACEBOOK: SMALLTOWNSPEED

UNLESS OTHERWISE STATED, ALL OF THE PARTS I'M SELLING ARE USED. I guarantee them to fit the bike I took them off of; and any other years on models mentioned are to help people find parts that may work for them, not a guarantee of fitment. I pride myself in good customer service, accurate descriptions, and low prices. There is no feasible way for me to list or confirm every possible fitment while keeping my prices low. If you're not sure, check with your local dealer, or compare part numbers at an online oem supplier like motosport. BUT I CAN NOT STRESS ENOUGH THAT EVERY PART I SELL IS SOLD EXACTLY AS PICTURED AND AS-IS. It is also possible that over the life of the bike that I'm parting out, that parts were changed to something other than what was put on at the assembly line. So, where am I going with all of this? I wont stick anybody with parts they don't want or can't use. I accept returns, and my great feedback speaks for itself; seriously, read through some of it.... I treat other riders(that's you) how I would want to be treated; but I ask that you do the same for me in two ways. 1- having realistic expectations when your buying used parts. 2- if something is not right; let me know and give me a chance to make it right for you before opening a dispute or leaving feedback. I've never had anybody who has contacted me with an issue not end up completely satisfied. I aim for 5 star service 100% of the time. If I'm not achieving that, please let me know how I can improve.


Thanks!

Valve Covers for Sale

Bentley Continental V8 flies in to Munich (video)

Fri, 10 Feb 2012

The Bentley Continental V8 flies across Munich The Bentley Continental V8 made a dramatic public debut in Munich when it was flown to the SkyLounge for its launch. The plan to debut the new Bentley Continental V8 (apparently we shouldn’t call it the Continental GT V8, just the Continental V8) in Germany in Munich’s SkyLounge might sound like a perfectly reasonable thing to do. After all, every car maker needs a ‘venue’ for a launch to make an impact, and something called the ‘SkyLounge’ sounds like it might make a good backdrop for Bentley’s newest toy.

Ford design chief J Mays retires, replaced by Moray Callum

Tue, 05 Nov 2013

J Mays, Ford Motor Co.'s global design chief and one of the last senior executives remaining from the Jacques Nasser era, is retiring from the company along with two other veteran senior executives. Moray Callum, 58, design director for Ford in North America, will replace Mays, 59, the automaker said in a statement today. Also retiring after long Ford careers are Jim Tetreault, 57, vice president of North American manufacturing, and Martin Mulloy, vice president of labor relations.

Chrysler recalls 200 and Dodge Avenger for fuel-tank valves

Thu, 21 Feb 2013

Chrysler is recalling 1,934 examples of the 2013 Chrysler 200 and Dodge Avenger sedans, looking for 16 vehicles in particular with damaged fuel-tank-control valves. A routine maintenance operation led the tank supplier to discover it had shipped damaged goods. The damaged valves could cause engine stalling or fuel leakage.