Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included
Back Plate included
All product shipped are tested
One year limited warranty
WARNING :Ski-Doo Tundra R 1999-2005 models ; RM01227 stator has a different visual configuration than the OEM equipment, but works perfectly and exactly as a replacement part to your OEM stator.
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Other specifications :
Number of wires : 7
Number of plugs : 2
Number of pins : 7
Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4ohms +/-20%
Alternator: Yellow to Ground = 0.L on display
Instructions
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
