Find or Sell any Parts for Your Vehicle in USA
Performance & Racing Parts > Auto Performance Parts > Driveline & Transmission > Rear End

Strange Hd Pro Aluminum Rear End Case Kit-ford 9 Inch-p3203- Pro-drag Or Street on 2040-parts.com

US $677.00
Location:

Auburn, Indiana, United States

Auburn, Indiana, United States
Strange HD Pro Aluminum Rear End Case Kit-Ford 9 inch-P3203- pro-drag or street, US $677.00, image 1
“Opened sealed box for pictures of third member case & pinion support kit and all components for this auction - brand new - pinion support has a small impact from shipping - non functional surface - check picture with arrow pointing out area”
Brand:Strange Eng Country/Region of Manufacture:United States Manufacturer Part Number:P3203 Core Charge:n/a Placement on Vehicle:Rear Part Brand:Strange Engineering Surface Finish:Manufacture Spec Country of Manufacture:United States UPC:679460117261

Up for your viewing and auction-Brand New Design-Strange Engineering HD Pro Aluminum Third Member Rear End Case Kit p/t# P3203 for a Ford 9in. style housing application in original shipping packages.  Check pictures of all items involved in this auction per listing. This is a lightweight HD Pro Aluminum third member or center section case with thru bolts, 3.25" dia side bores, pinion support with bearing cups installed, pinion tail bearing, retaining plate with c't sink bolts, rubber "O" ring for pinion support, assembly shims and mounting bolts with flat washers.  The HD Pro Aluminum case is designed for Pro-Drag racing, other track racing and extreme street applications using a 35/40 spline axles with  a spool or differential where unsprung weight is a concern, maximum strength and gear life are required.  Case will support 9" or 9-1/2" ring gears.  Applications include heavy drag cars, dragsters, pulling trucks and wild extreme street machines.    Numbers on flange face N2303  05-15  - Numbers on pinion support N2300D 07-15  - Label on box 11/19/15

 **CHECK pictures** 

**UPC 679460117261**

***Requires 3.25" dia O.D. bearings***    (best choice -- REF. Strange Bearing Kit  -  pt# D1590)

***Pinion Support comes with taper bearing cones installed - Best choice for pinion assembly - Strange pn N1923 = 28 spline pinion stem or pn N1924 = 35 spline pinion stem***

***Additional components required -Spool or Differential, Pinion Yoke or Female Coupling-Ring & Pinion Gear Set-Gasket (Center section to housing)***

*****When using "Make Offer" bid -  A response will be provided within 8 hrs.***** 

***READY FOR THAT 1ST TIME ASSEMBLY and INSTALLATION***

 Successful bidder will not be disappointed!!

please ask questions for application via listing or check out Strange Eng. web site

SHIPPING to a USA address only - will ship in in high quality boxes for maximum protection during shipment

Shipping surcharge required for outside the LOWER 48 USA States

****Will ship to Canada -surcharge is required**** 

7% sales tax is required if shipped to a INDIANA address

Shipping will be provided via UPS ground service and a signature will be required

 Local pick up offered also

Thanks for viewing!!!

General Motors is dropping corporate logo from all vehicles

Tue, 25 Aug 2009

General Motors is dropping the GM logo on its cars and trucks. The badge is a small silver square with "GM" embossed on it. It's usually on the lower edge of the front fenders.

There will NOT be a ‘Super’ LaFerrari after all

Tue, 07 May 2013

Ferrari has been on the phone this morning to explain that the man from Autocar who spoke to LaFerrari’s chief designer, Flavio Manzoni, got hold of entirely the wrong end of the stick when discussing the design elements Ferrari didn’t use on LaFerrari. It seems Manzoni was explaining that during the design process for LaFerrari there were many design elements that couldn’t be included on LaFerrari, but were so good they wanted to keep them for use on future Ferraris. That was seized upon as confirmation that Ferrari were planning a ‘Super’ LaFerrari to sit above the new supercar at an even more extreme price.

CEO Krafcik leaves Hyundai, succeded by Zuchowski

Fri, 27 Dec 2013

Hyundai Motor America said John Krafcik will step down as CEO at year end, capping a five-year run during which he steered the Hyundai brand to record U.S. sales and market share. Krafcik will be succeeded by Dave Zuchowski, currently Hyundai's executive vice president of U.S.

2040Parts.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.025 s, 11267 u