Studebaker Pair Driving Spot Or Headlights With Mounting Brackets Used Cool Nice on 2040-parts.com

Up for sale are a Good, USED Pair of Studebaker Driving or Spot Light Assemblies that I bought a while back to use on a project, going a different way. I had considered using these as headlights on my rod project - thought about rewiring into headlights - but found other lights to use instead. I really liked the rear button on the back of these light assemblies - just thought it would look cool on the front end of my rod project. One of the lens is gone, the other is still good. You might even replace both lens and make these lights into fog lights(?).  These assemblies are a left and a right side assembly - opposite brackets. These could probably be mounted either at the front of the car or truck or at the cowl or side of the door for that custom / vintage look as spot or driving lights. These will need work to be usable - at least some new wiring, bulbs and some work on the one swivel base (the light that has the good lens). I would bet these are 6 Volt lights assemblies. Still has the mounting bolt for the assembly attached along with a wire hanging out of the lower area of the assembly near the mounting nut. The good glass lens on the one assembly has the GE logo in the center of the glass. These headlight buckets are in good shape (I think) - not all dented and rusted thru - some minor dings on the trim rings and some minor rust and pitting, but I believe most of that will polish out - if you want to polish these for your project. May need some cleaning & polishing to use "as is" on your rat rod, or have the chrome pieces re-chromed. I believe these light buckets were used on Studebaker cars and/or light trucks in the late 20' thru 1950's. Please look at the pics and you decide if these will work for you. I don't see any major dents or cuts - these look good to me, especially nice considering how old these probably are. No need to have these sitting on my shelf, collecting dust. Please look at this and be sure this will work on your application or project. These are USED - I believe, I would not consider this to be show quality (as is), but still very nice and could probably be made show quality. Please be sure these will work for your application before you bid. Imprinted on the top of the buckets on these assemblies is printed "STUDEBAKER" and the one good lens itself has "GE" logo in the center.

Took some quick measurements, this light assembly is approximately 4-5/8" front to back, 5-1/4 side to side (overall) and approximately 4" of the lens is visible. Hope this helps you match this assembly with your existing assemblies or for your intended use.

Thanks for Looking.

NOTE: I will ship to all the places listed on the shipping information, but I will not ship outside the lower 48 Continental United States for the same price that I ship to the lower 48 - I just can't do it due to the cost(s). Also, please note, as listed in all of my listings, I will ship your item after payment clears within 3 to 4 days. And a cleared payment means your payment cleared my bank, not that you made the payment from your account - there is a difference. I'm sorry if you think 3 to 4 days is too long, but it is clearly stated if you read my listings. If you don't like this, I can't help that, but please know this going in. This shouldn't give you license to mark my "time to ship" in your ratings of my performance as low or poor - this is clearly stated in my listings - please read all of the listing before you bid. Pictures tell the story - if you have questions, please ask before you bid. This is up for auction at "NO RESERVE", low starting price. If you are the high bidder, you own it. What you see is what you get - sold "as is". No refunds, no returns. Please only bid if you are serious. I don't want to discuss what you dis-like about my listing or terms after you are the high bidder. I will leave the earned feedback for anyone that does not follow thru with the purchase. If you bid, plan to buy. If you have no feedback or prior "issues", please e-mail me before you bid. If you don't e-mail first with some kind of explanation for your feedback "situation(s)", I have the option to cancel your bid & block you from bidding. High bidder is expected to pay in full within 3 days of my total notification - no exceptions, no excuses. High bidder will pay bid price - shipping & handling is included in your bid price. Since I'm paying the shipping out of your total price, I will decide whether this ships via USPS or Fed-Ex Ground. If I ship by Fed-Ex Ground, I will need a physical address (not a P.O. Box) and a phone contact number. May also be fit on your 1928, 1929, 1930, 1931, 1932, 1940, 1950, 1960, Studebaker, Ford, Fordor, Tudor, Chevy, Dodge, Chevrolet, Mopar, Chrysler, BOP, Pontiac, Oldsmobile, Lincoln, Convertible, Roadster, Coupe, Hot Rod, Custom, Rat Rod, Street Rod, Classic, Vintage, Off Road Vehicle, etc - if you are using this type of head light or Spot or Driving Lite set-up.