The Krakens Revenge 2 Boat Wrap - Customized To Fit Your Boat - Marlin Mahi Tuna on 2040-parts.com
US $795.00
Location:
Naples, Florida, United States
Condition:New
Decal Type:Wrap
Country/Region of Manufacture:United States
 |
Phone (239) 431-7356 Monday-Friday 8am to 5pm (e.s.t) The Kraken's Revenge 2 * Alternate Background!
Custom Boat Wrap - Customized to Fit Your Boat
- Marlin, Mahi Mahi, Tuna Fish and the Kraken/Octopus -
Sold in directional pairs, one left and one right side.
This wrap purchase is for a boat wrap to fit on a boat that is between 18 feet to 20 feet in length
From the rubrail down to the waterline.**
Longer boats may cost a little more. Smaller boat sizes are fine as well. We
will customize the wrap AFTER purchase to fit the actual year, make and
model of your specific boat to show the most available image area to
achieve the best visual display. Our boat wraps can be fitted to accommodate most boat models.
Once ordered and paid for, you will NEED to
provide the
year, make, model, length of your boat and a side shot picture
as well as very accurate dimensions.
SEE EXAMPLE OF HOW TO MEASURE BELOW
Please email us with details.
Once you have approved the layout, we will manufacture it and ship within 36-48 hours. All products made on site.
Wrap will have excess in the front and rear as well as the top and bottom to allow for appropriate amount of trim.
Set up to be trimmed at the nose and a few inches around the back toward the motor. Your graphics color may vary slightly from what you see depending on you monitor Setting.
(boat not included, ha!)
Material is 3M IJ180 cv3 cast boat wrap vinyl film with 3M 8518 cast overlaminate for maximum UV protection.
Shipping to the lower 48 U.S. only. No shipping to Hawaii and Alaska. |
|
Please try to follow these instructions to ensure success.
1. Specify the color or design you prefer, such as “Green” or "Diver & Octopus".
2. Submit an image of the boat. Make it a nice side shot like this example.
Submit images and artwork to:
3. Take some dimensions of the boat hull. Be sure to include the length along the rubrail,
the max depth from the rubrail down to the waterline edge where the wrap will end,
then along the hull every 2 feet or so as shown in the diagram.
4. Your wrap print will ALWAYS have more length and width than the actual dimensions
you send for “wiggle room” and proper trimming.
5. Be sure to include the year, make and model of your boat.
6. We submit a final mockup layout for your written approval showing the wrap you
chose superimposed on the image of your boat hull.
7. Once we receive your approval the finished boat wrap is produced
and shipped within 36 to 48 hours.
YOUR WRAP WILL COME IN A RECTANGLE SHAPE AS SHOWN IN THE ABOVE
EXAMPLE. THIS ALLOWS FOR PLENTY OF TRIM AREA.
** 3b. If you want your boat wrap to go up
over the rubrail into the gunwales, or if you want the bow or stern
wrapped as well, you need to provide those dimensions as well. This will add to the cost. You can
use the below diagram as a reference to ensure your wrap fits and
presents itself the best.
|
We have many variations of our graphics and also provide custom colors upon request.
If you have any questions, Please don't hesitate to call.
|
|
|
|
Decals for Sale
Thu, 14 Mar 2013
The 2014 Acura RLX goes on sale Friday with a starting price of $49,345 including a destination charge of $895. The top trim with the Advance Package starts at $61,345. All RLX sedans will get Acura's new 3.5-liter V6 making 310 hp and 272 lb-ft of torque.
Tue, 06 Mar 2012
Infiniti Emerg-E arrives at Geneva
The Infiniti Emerg-E has been revealed at Geneva 2012 with 402bhp from a pair of electric motors and a range-extender engine. The Infiniti Emerg-E, which has been revealed today at the Geneva Motor Show, looks to be a properly promising supercar from Infiniti, and utilises the expensive range-extender technology to produce a stunning-looking car with proper performance potential. Power for the Emerg-E comes from a pair of electric motors powering the back wheels with a combined output of 402bhp and is capable, say Infiniti, of up to 300 miles between charge thanks to its 1.2 litre 3-pot range extending engine (which comes from Lotus) and up to 30 miles on EV power.
Fri, 20 May 2011
The new Aston Martin V12 Zagato has been unveiled ahead of its official debut at the Concorso d'Eleganza this weekend. This latest concept marks the revival Aston Martin's long-standing collaboration with the famed coachbuilder in the 50th anniversary year of the iconic DB4GT. Based on the V12 Vantage, the Zagato model features the coachbuilder's defining 'double bubble' roof and a new handcrafted aluminum body, which was formed using an English wheel and traditionally crafted body bucks.
Wrh edition decal set gold w / glitter 6" x 1 1/4" marine boat
Johnson enforcer port / starboard decals black 20 1/2" x 8 1/8" marine boat(US $39.95)
Johnson enforcer 350395 single decal black 20 1/2" x 8 1/8" marine boat(US $29.95)
Evinrude decal red / green and gold 54 1/2" x 8 1/4" marine boat(US $39.95)
44 inch sun tracker pontoon marine vinyl suntracker boat decal(US $24.99)
Rinker raised gold flake decal(US $50.00)