Find or Sell any Parts for Your Vehicle in USA

Tikka Ppc Snowmobile Muffler Can Arctic Cat 800 8000 on 2040-parts.com

US $378.00
Location:

Jokkmokk, Sweden, Sweden

Jokkmokk, Sweden, Sweden
Condition:New

TIKKA World Unike Pat Pend.

Stainless Steel Arctic Cat 800 8000 Muffler Can

Elevation Adjustable Muffler Can Adjustable up to 15,000ft

TIKKA PPC POWER CAN ADJUSTABLE PRESSURE             

We Manufacture and sell Hi-Performance Parts for Snowmobiles

Yamaha Screw Charger and Two-Stroke Turbo kits, Billet Max Shot Booster and Heavy Hitter Fly Weights Performance Pipes and Parts, Dynotesting up to 1300Hp

Cylinder porting, Race Engines, Complete Race Sleds

Catalytic Emission Systems for Two Stroke Rotary and Four Stroke Engines

 

Arctic Cat M800 XF800 ZR8000 RR F800 M8000 XF8000 2012-2016

TIKKA PPC Sport Sound Stainless steel adjustable PPC Muffler Can

Art Nr: AC8 800 -11/-16

 

PPC Power Can is developed and tested in our dyno lab and on lakes trails and mountains for many hours.

The power gains come from the balance of backpressure and flow. We tuned this muffler until we gained flow and at the same time raised the backpressure.

 

This is not possible if the pulses from the pipe are in perfect tune with the back pulse from the muffler PPC cone. It’s like tuning a musical instrument. Length and pipe diameter must be exactly right to make power. The power gain on the 800cc motors with stock pipe is 4-6hp depending on adjustment of the PPC Cone. Throttle response and time to build power is better with the PPC Muffler. Adjustments are easy dun from the bottom of the muffler just pull the snowmobile on the side and make adjustment in the PPC cone. Sound level on WOT is higher then the stock muffler so don’t drive at WOT near buildings people or animals please. Sound at low rpms is about stock. We have 2 models of this muffler can Sport Sound and Wild Sound muffler weight is only 1,9 Pounds!

 

For normal riding at sea level up to 1500ft elevation Low pressure setting in the PPC cone 1500ft to 4000ft Medium Pressure 4000ft to 12000ft Max Pressure setting Over 12000Ft up to 15000Ft we have custom Cone for more backpressure.

Warning Medium Pressure can be used at sea level but only for short accelerations max 1/8Mile! Pipe pressure will rise super fast and the nock sensor will sense nock if long WOT runs are dun with Medium Pressure. And the EGT sensor will detect higher then normal temps and will start to add fuel. Then power will go down allot. Max Pressure cannot be used at sea level at all.

 

To install the muffler can just remove the stock muffler It’s important to check out the number on the muffler so the right year model muffler is used. Its one model for 800 2012 and another number for 800 2013 to 2016  If you have any questions please mail us at tikkaraceathotmailcom before installing the muffler can. We also have 600 Muffler always let us know what model and year snowmobile you have.

 

 

Tikka PPC Sport Sound muffler will fit in the sled almost without any modifications. It will fit the stock hole in the belly pan and use the stock springs to hold the PPC Can. The PPC Can is mounted with the stock cone gasket to the pipe. Put some silicon for sealing. And put the reflective heat foil on the inside of hood side to prevent heat wrap of the plastic.

 

The PPC can is stainless steel but we paint the in and out sides with ceramic high temp 700 Degr C paint. The paint is just like a powder lightly attached to the metal before heat hardened. Will peel of easy before cured by heat. The paint need to cure in 200 to 350 Degr.C for about 40 Min so to get the paint to look nice drive slowly for about 20 min the let it cool down and the drive slowly for another 20 min then the paint is cured and ready for WOT. If you heat it too much right away it will burn before curing is complete and will take a gray or white colour. The paint used is  Plastic Padding Heat Proof Ceramic Paint Art Nr: 430  IDH 360373 so you know when you will re paint it in the future.

 

Now start testing on a lake without any thing in your way. Check out the route first so its flat and no bumps and so on. Accelerate from standing still and check the Tachometer in the beginning of the acceleration 8000-8100 Rpm for best pull. And after 70-100m rise to max 8200-8400Rpm. If Rpms clime higher put heavier weights or steeper helix in the clutches.

We have Tikka PPC Mufflers Cans for XF7000 and 1100T 9000 models

Aalmost all snowmobile marks and models contact us.

 

Good luck and remember always ride safe and sober!

And join our RSS Program to prevent alcohol consumption on the trails.

 

 

TIKKA PPC Power                                                                                                                                     All the best from 

Purkijaur 2040                                                                                                                                                   Matts Tikka

962 99 Jokkmokk

Sweden                                                                                                                                          ……………………

Exhaust for Sale

Saab gets more cash from China partner

Wed, 01 Jun 2011

Saab has received another cash boost from its new China partner Pang Da with an additional order for 630 cars, worth 15 million euros or $21.7 million at current exchange rates. The order comes on top of an order for 1,300 cars worth $43.3 million (30 million euros) received by Saab from Pang Da in May. The Chinese company will pay in advance for the order and delivery of the vehicles will start in the third quarter, Saab said.

Thomas Ingenlath: Volvo Concept C to end 'vanilla' design era [w/Video]

Tue, 27 Aug 2013

Volvo has promised a radical change in its future design language that will be embodied in its Concept C coupé, the first concept to be developed since head of design Thomas Ingenlath's appointment in July 2012. Our first look at the concept, which debuts at this month's Frankfurt motor show, comes from a video starring Ingenlath (see left). At first it seems to just show him sketching while he explains how some people see Volvo design as "vanilla" – nice, but not iconic or cutting-edge – but if we slow it down at around the 11-second mark, we get a preview of what we can expect.

2007 China Automotive Design Conference

Fri, 05 Oct 2007

The 2007 China Automotive Design & Independent Innovation Conference marked the first gathering of independent Chinese (vs. joint venture) automakers getting together to discuss automotive styling. Taking place at the end of August, more than 140 design professionals from First Auto Works (FAW), Dongfeng Motor, Chery, Brilliance, Chana, Guangzhou Auto, Nanjing Automotive Corp.